Push to Connect Fittings（Fitting Type：Screw Mounting, Direction）

• 

  Tube Fitting for General Piping - Straight

  Nihon Pisco

  An extensive lineup of one-touch fittings for general piping.
  
  [Features]
  · A one-touch fitting for general pneumatic pipes.
  · The take out angle of the resin body can be changed after installing.
  · Extensive lineup.
  · Intensive plumbing is made possible.
  · The triple type (PKD, PKG, and PKJ) and triple-double type (PKVD and PKVG) enable compact intensive plumbing.
  · Light gray types, and cleanroom-packaged types available as options.
  · The cleanroom packaging specification utilizes fluorinated grease.
  · After cleaning with clean air, the fitting is packaged inside a cleanroom (ISO Class 6 EQUIV).

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  General Piping Use Tube Fitting, Elbow

  Nihon Pisco

  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Rich lineup.
  · The take-off angle of the resin body can be changed after mounting.
  · Centralized piping is supported.
  · Light gray and clean room packaged types are available as options.
  · Clean room packaging specification uses fluorinated grease.
  · After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Male Elbow Push to Connect Fittings with Buna-N O-Ring, Nylon - TF-PTC Series

  USA Industrials

  Also known as one touch fittings, these tube fittings are designed to slide into the fitting with an internal grasping ring holding it in place. Intended for low pressure applications and for use with plastic and soft metal tubing. Nylon is well suited for air applications.

  Days to Ship:	13 Days or more

• 

  Touch Connector Nipple Connector

  Chiyoda

  [Features]
  · Selectable main body material of metal or resin types.
  · Tubing is held by the spring force of "ACTIVE" edge. Most one touch fittings have a passive edge designed to achieve peak holding force only when tubing is pressurized, however the "ACTIVE" edge always holds the tube.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Chemifit C1 Series, 90° Elbow EL-C1

  Nitta

  90° Elbow EL-C1 is treated with a process that uses absolutely no oil. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Male Connector Push to Connect Fittings with Buna-N O-Ring, Polybutylene & Nickel Plated Brass - PTC-PBT Series

  USA Industrials

  Also known as one touch fittings, these tube fittings are designed to slide into the fitting with an internal grasping ring holding it in place. Intended for low pressure applications and for use with plastic and soft metal tubing. Polybutylene won't absorb moisture, so these fittings are good for water and high-humidity air applications.

  Days to Ship:	13 Days or more

• 

  Touch Connector Five Male Connector

  Chiyoda

  [Features]
  · TCV is composed of only five components. Fewer-components lower the cost considerably.
  · A solid resin body type is available in both male and elbow connector styles.
  · A newly designed stainless-steel locking ring assures a complete tube connection
  · A newly designed ring backing assures a complete seal.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Push One A Series, Connector

  Nitta

  No jigs or tools are required for connecting tubes to this connector. Degradation of the surface is minimal and elution of copper ions into the liquid is also prevented.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  PushOne E Series Connector

  Nitta

  No jigs or tools are required for connecting tubes to this connector. The surface is resistant to degradation, preventing elution of copper ions.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Tube Fitting Universal Elbow for Standard Pipe

  Nihon Pisco

  Many types of one-touch fittings for standard piping.
  
  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Can change the take-off angle of the resin body after mounting.
  · Diverse lineup.
  · Centralized piping is supported

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  General Plumbing Tube Fitting Mini-Type, with Straight Hexagonal Socket

  Nihon Pisco

  Volume has been successfully reduced by 40% from the standard type.
  
  [Features]
  · Ultra-small one-touch fitting for general pneumatic pipes.
  · Elliptical release ring allows easy tube release.
  · Reduced size with a volume ratio of 40% over the standard type.
  · The φ1.8 mm type is an industry-first minimum one-touch type.
  · Optimum for piping of small actuators and the like.
  · Light gray types, and clean room packaged types are available as options.
  · Clean room packaging specifications define the use of fluorinated grease.
  · After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Days or more

• 

  for Corrosion Resistance, Corrosion Resistant SU303 Equivalent Fitting, Elbow

  Nihon Pisco

  No copper-based metal used. Optimal for handling low concentrations of ozone.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Touch Connector Five Male Elbow

  Chiyoda

  Lightweight, one-touch fitting with a flame-retardant resin. Male elbows.
  
  [Features]
  · Unnecessary parts have been eliminated and the sizes of remaining parts have been minimized to achieve the ultimate cost performance.
  · Further weight reduction achieved by making body parts all resin.
  · Utilized a new lock ring to achieve a joint function to perform piping work more smoothly and securely.
  · Used new packing to reduce the connecting operation force while maintaining high airtightness.
  · The model identifiers have been inscribed on products using an all-item laser marking process.
  · A standard, flame-retardant resin has been adopted.
  · Screw part sealing (R screw): Can be used for piping as-is because the threaded part has been sealed.
  · The body and screw parts of elbows can rotate.
  　*This is not a rotary type. Note that all-resin types do not rotate.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Touch Connector FUJI Male Elbow

  Chiyoda

  A one-touch fitting with a rotation locking ring to prevent from turning and breaking. A male elbow with a body manufactured from metal or resin.
  
  [Features]
  · All-metal type fittings demonstrate excellent strength under tough conditions. The resin body type fittings are lightweight.
  · Pipes connected to different machines can be easily identified by attaching display rings (sold separately).
  · A rotating locking ring type for preventing full rotation of the tubes.
  · The threaded section has been seal processed—enabling pipes to be used directly.
  · The body and thread section of the elbows and branch tee are rotatable.
  · *This is not a rotary type fitting.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Touch Connector H Type Elbow Connector

  Chiyoda

  A one-touch fitting with high pull-out strength and durability. Metal elbow connector.
  
  [Features]
  · Utilizes a special locking ring to provide maximum pull-out force and durability for this one-touch fitting.
  · The O-ring has been replaced with a Viton® packing seal to support high temperatures. Optimally suited to P flexible piping (please install an OF, such as CKN-6-01-H-OF, at the end).
  · To insert multilayered tubing, peel off the outer section and install the one-touch coupling.
  · The life of the tube can be increased significantly by fitting a standard metal cap to prevent exposure of the inner tube.
  · All-metal types have exceptional strength under tough conditions.
  · Thread section sealing (R thread): The thread section is sealed. Therefore, the fitting can be used directly for piping.
  · The body and thread section of the elbows and branch tee are rotatable.
  · *This is not a rotary type fitting.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Touch Connector H Type Nipple Connector

  Chiyoda

  One-touch fitting featuring high drawing strength and durability. Metal nipple connector.
  
  [Features]
  · By adopting the use of a special lock ring, the highest level of pull-out strength and durability is provided for one touch fittings.
  · O-ring is switched to Viton packing, so that it can be used in high temperature applications (it is best suited for P flexible piping; make sure that you install an OF at the end, such as the CKN-6-01-H-OF).
  · To insert a multi-layer tube, remove the outer layer and attach the one-touch coupling.
  · The life of the tube is increased significantly if a standard metal cap is fitted to prevent exposure of the inner tube.
  · All-metal types have excellent strength under tough conditions.
  · Screw element sealing (R screw): Can be used for piping as-is due to screw element sealing.
  · The body and screw elements of elbows and branch tees can rotate.
  · *Not a rotary type.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Touch Connector Five, H Type, Single Banjo

  Chiyoda

  [Features]
  · Touch Connect FIVE H type utilizes an all-metal main body that is resistant to weld spatter.
  · Metallic spatter cap protects the release ring and guide from weld spatter and also acts as the release ring.

  • Volume Discount

  Days to Ship:	13 Days or more

• 

  One-Touch Fitting KQ2 Series Male Connector KQ2H (Gasket Seal)【5-10 Pieces Per Package】

  SMC

  The Male Connector KQ2H (Gasket Seal) is a one-touch fitting from SMC.
  [Features]
  · Improved tube insertion/removal.
  · Compact and light weight.
  [Applications]
  · Typically used together with a male elbow. However, where it differs is that it is used to prevent interference between fittings by allowing for multi-level piping.
  [See here for catalog]
  · Applicable tube outer diameter (metric), Connection thread [M], Release button: oval (pp. 9) / circle (pp. 105)
  · Applicable tube outer diameter (inches), Connection thread [UNF], Release button: oval (pp. 33) circle (pp. 137)
  · Applicable tube outer diameter (inches), Connection thread [M], Release button: oval (pp. 52) / circle (pp. 160)
  · Applicable tube outer diameter (metric), Connection thread [Uni], Release button: oval (pp. 90) / circle (pp.204)
  · Applicable tube outer diameter (inches), Connection thread [Uni], Release button: oval (pp. 98) / circle (pp. 212)

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  One-Touch Fitting KQ2 Series Male Connector KQ2H (Sealant / No Sealant)【5-10 Pieces Per Package】

  SMC

  A one-touch male connector fitting (KQ2H) with sealant from SMC.
  [Features]
  · Improved tube insertion/removal.
  · Compact and light weight.
  [Applications]
  · Use to pipe from female threads in the same direction.
  [See here for catalog]
  · Applicable tube outer diameter (metric), Connection thread [R], Release button: oval (pp. 9) / circle (pp. 105)
  · Applicable tube outer diameter (inches), Connection thread [NPT], Release button: oval (pp. 33) circle (pp. 137)
  · Applicable tube outer diameter (inches), Connection thread [R], Release button: oval (pp. 52) circle (pp. 160)

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  One-Touch Fitting KQ2 Series Male Elbow KQ2L (Gasket Seal)【5-10 Pieces Per Package】

  SMC

  A one-touch fitting by SMC.
  [Features]
  · Improved tube insertion/removal.
  · Compact and lightweight.
  · Can be used with a vacuum pressure of -100 kPa or more.
  · Body shape: Total of 51 models.
  · Thread part material / surface treatment (with/without): 2 types.
  · Available surface treatment: brass (no plating), brass + electroless nickel plating.
  [Applications]
  · Use for piping from female threads at right angles.
  [See here for catalog]
  · Applicable tube outer diameter (metric), Connection thread [M], Release button: oval (pp. 11) / circle (pp. 108)
  · Applicable tube outer diameter (inches), Connection thread [UNF], Release button: oval (pp. 35) circle (pp. 140)
  · Applicable tube outer diameter (inches), Connection thread [M], Release button: oval (pp. 52) / circle (pp. 160)
  · Applicable tube outer diameter (metric), Connection thread [Uni], Release button: oval (pp. 90) / circle (pp.204)
  · Applicable tube outer diameter (inches), Connection thread [Uni], Release button: oval (pp. 98) / circle (pp. 212)

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  90 Degree Female Elbow Push to Connect Tube Fittings, Polybutylene

  USA Industrials

  Also known as one touch fittings, these tube fittings are designed to slide into the fitting with an internal grasping ring holding it in place. Intended for low pressure applications and for use with plastic and soft metal tubing. Polybutylene won't absorb moisture, so these fittings are good for water and high-humidity air applications.

  Days to Ship:	13 Days

• 

  90 Degree Male Elbow Push to Connect Tube Fittings, Polybutylene

  USA Industrials

  Also known as one touch fittings, these tube fittings are designed to slide into the fitting with an internal grasping ring holding it in place. Intended for low pressure applications and for use with plastic and soft metal tubing. Polybutylene won't absorb moisture, so these fittings are good for water and high-humidity air applications.

  Days to Ship:	13 Days

• 

  New Joint GWL □-□- Series

  CKD

  Push-in fitting for pneumatic piping. Compact size for space saving. Work environment and device-friendly flame-resistant white body.
  Single elbow fitting

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Tube Fitting Branch Female Universal Elbow for General Piping

  Nihon Pisco

  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Rich lineup.
  · The take-off angle of the resin body can be changed after mounting.
  · Centralized piping is supported.
  · Light gray and clean room packaged types are available as options.
  · Clean room packaging specification uses fluorinated grease.
  · After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  for General Piping, Tube Fitting Mini-Type Straight

  Nihon Pisco

  [Features]
  · Ultra-small one-touch fitting for general pneumatic pipes.
  · Reduced size with a volume ratio of 40% over the standard type.
  · Elliptical release ring allows easy tube release.
  · The φ1.8 mm type is an industry-first minimum one-touch type.
  · Optimum for piping of small actuators and the like.
  · Light gray types, and clean room packaged types are available as options.
  · Clean room packaging specifications define the use of fluorinated grease.
  · After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Days or more

• 

  Tube Fitting Brass Straight for Sputter Resistance

  Nihon Pisco

  The main body and release ring are made of brass for superior flame retardance and sputtering resistance.
  
  [Features]
  · Available sealing rubber materials include HNBR, FKM, and NBR.
  · Ideal for environments where exposure to sparks may occur.
  · Release ring made of brass offers excellent flame retardance and sputter resistance.
  Cover type prevents sputtering inside the fitting and dust intrusion.
  · An optional spatter cover shuts out fine sparks.
  · By placing a release ring cover (CS), sold separately, sparks that penetrate through the gap between the release ring and the tube can not get close

  • Volume Discount

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Spatter Resistant Tube Fitting Brass Straight without Cover

  Nihon Pisco

  The main body and release ring are made of brass for superior flame retardancy and sputtering resistance.
  
  [Features]
  · Available sealing rubber materials include HNBR, FKM, and NBR.
  · Ideal for environments exposed to sparks.
  · Release ring made of brass offers excellent flame retardancy and sputter resistance. The cover type prevents sputtering inside fitting and dust intrusion.
  · An optional sputter cover prevents fine sparks from entering.
  · By using a release ring cover (CS – sold separately), sparks that penetrate through the gap between the release ring and the tube cannot get close.

  • Volume Discount

  Days to Ship:	Same day or more

  Show Stock Products

• 

  for Corrosion Resistance, SUS304 Fitting, Straight

  Nihon Pisco

  [Features]
  · This tube fitting serves best where strength is required or the atmosphere contains chemicals.
  · Seal material is made of FKM.
  · Metal unit is made of SUS304,

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  for Corrosion Resistance, Corrosion Resistant SUS303 Equivalent Fitting, Straight

  Nihon Pisco

  No copper-based metal used. Also optimal for low-concentration ozone measures.
  
  [Features]
  · Perfect when additional strength is required and used in a corrosive atmosphere.
  · Metal body uses special stainless steel whose corrosion resistance is SUS303 equivalent (Cr19 - 21%, Mo1.5 - 2.5% stainless).
  · Copper based metal not used.
  · HNBR has been utilized in the sealing rubber material as part of efforts to reduce ozone concentrations.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  for Mold Cooling, Mold Temperature Control Fitting, Stop Valve Built-in Type, Straight with Hose Fitting

  Nihon Pisco

  [Features]
  · Push-In Fitting Type for Die Temperature Control.
  · Thermal Oil, Clean Water and Air for Fluid Medium.
  · No Projection left on the die, after uncoupling Plug.
  · Stop Valve Built-In Type prevents Hot Water Ejection when uncoupling Plug.

  • Volume Discount

  Days to Ship:	15 Days or more

• 

  Touch Connector FUJI Male Connector

  Chiyoda

  One-touch fitting which prevents rotation stoppage of tubing using rotation lock ring. Male connector with metal body.
  
  [Features]
  · All-metal types and resin body types available.
  · All-metal types feature excellent strength under tough conditions, while resin body types are lightweight.
  · Pipes connected to different machines can be identified easily when indicator rings (sold separately) are attached.
  · Rotation lock ring prevents rotation stoppage of tubing.
  · Screw element sealing (R screw): Can be used for piping as-is due to screw element sealing.
  · The body and screw elements of elbows and branch tees can rotate.
  · *Not a rotary type.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Touch Connector FUJI, Female Connector

  Chiyoda

  [Features]
  · A one-touch fitting with a rotation locking ring to prevent the tube from turning and breaking.
  · A metal body female connector.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Touch Connector Elbow Connector

  Chiyoda

  A vacuum-compatible one-touch fitting that boasts great drawing strength and durability. Elbow connector selectable from metal and resin.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Chemifit C1S Series, 90° Elbow EL-C1S

  Nitta

  [Features]
  · A completely oil-free processed product — parts are washed and assembled in a cleanroom. No oil or grease is used even for the sealing material.
  · The tube is connected by a PushOne® fitting: No jigs nor tools are required for connecting the tube.
  · The thread section is made of SUS304 for superior strength.
  · Double clean packaging: Each item is packed individually in a cleanroom and then packaged inside a zip-seal bag.
  · The main body and thread section rotate. The orientation of the elbow, tee, etc., can be decided when connecting the tubes.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  PushOne E Series 90 Degree Elbow

  Nitta

  A 90-degree elbow that does not require jigs or tools for connecting to tubes. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  
  [Features]
  · The tubes are PushOne® type fittings.
  · Requires no jigs or tools for connect to the tubes.
  · An electrogalvanized product.
  · Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  · A flame retardant resin (UL94 V-0 standard EQUIV) is utilized.
  · A flame-retardant PBT resin is utilized in the material.
  · A UL94 V-0 standard fitting with superior self-extinguishing properties.
  · This fitting is usable in spatter dispersion environments.
  · The R threads are sealed. Therefore, wrapping the threads with sealing tape is not required.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	7 Days or more

• 

  PushOne E Series 90 Female Elbow

  Nitta

  No jigs or tools are required for connecting tubes to this 90° female elbow unit. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  
  [Features]
  · The tube is connected by PushOne®.
  · No need for jigs nor tools to connect the tube.
  · Electroless nickel plated.
  · There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
  · Flame-retardant resin (equivalent to UL94 V-0 standard) adopted.
  · Non-combustible PBT resin is used for the materials.
  · Equivalent to UL94 V-0 standard, with superior self-extinguishing properties.
  · Can be used in environments in which sputtering occurs.
  · The R screws are sealed, and thus there is no need to wrap them with sealing tape.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  One-Touch Fitting KQ2 Series Male Elbow KQ2L (Sealant / No Sealant)【5-10 Pieces Per Package】

  SMC

  A one-touch fitting by SMC.
  [Features]
  · Improved tube insertion/removal.
  · Compact and lightweight.
  · Can be used with a vacuum pressure of -100 kPa or more.
  · Body shape: Total of 51 models.
  · Thread part material / surface treatment (with/without): 2 types.
  · Available surface treatment: brass (no plating), brass + electroless nickel plating.
  [Applications]
  · Use for piping from female threads at right angles.
  [See here for catalog]
  · Applicable tube outer diameter (metric), Connection thread [R], Release button: oval (pp. 11) / circle (pp. 108)
  · Applicable tube outer diameter (inches), Connection thread [NPT], Release button: oval (pp. 35) circle (pp. 140)
  · Applicable tube outer diameter (inches), Connection thread [R], Release button: oval (pp. 52) circle (pp. 160)

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  One-Touch Fitting KQ2 Series Hexagon Socket Head Universal Male Elbow KQ2VS (Sealant, No Sealant)【5-10 Pieces Per Package】

  SMC

  A one-touch fitting by SMC.
  [Features]
  · Improved tube insertion/removal.
  · Compact and light weight.
  [Applications]
  · A male elbow with a hexagon socket on the head of the body that can be used for tightening with a hex wrench. Ideal for use in confined spaces.
  
  [See here for catalog]
  · Applicable tube outer diameter (metric), Connection thread [R], Release button: oval (pp. 14) circle (pp. 112)
  · Applicable tube outer diameter (inches), Connection thread [NPT], Release button: oval (pp. 38) circle (pp. 143)

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	3 Days or more

• 

  Male Elbow KGL One-Touch Fitting【2 Pieces Per Package】

  SMC

  SMC One-Touch fitting.
  
  [Features]
  · Stainless steel specifications for use in corrosive environments.
  · SUS303 is used for metal parts.
  · Suitable for use in CRT production lines where contact with copper must be avoided, as well as for cleaning food processing machines where water or salt water splashes. Also, suitable for use inside clean rooms where discoloration of copper materials and dust caused by corrosion must be avoided.
  
  [Applications]
  · Use for piping at right angles from the female thread part. Most general style.
  
  
  

  • Volume Discount

  Days to Ship:	3 Days

• 

  Elbow Union Fitting KQG2L Metal One-Touch Pipe Fitting

  SMC

  SMC One-Touch fitting.
  [Features]
  · Compact and lightweight.
  · Grease-free.
  · Can be used with steam.
  · Metal part: SUS316, Seal part: special FKM.
  · Working fluid temperature: -5 to +150°C
  · Conforms to the Food Sanitation Act of Japan. (Part materials conform to the tool and packaging container standards test.)
  [Applications]
  · Used for perpendicular piping from a female thread.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Male 45 Degree Elbow Push to Connect Fittings with Buna-N O-Ring, Nylon - TF-PTC Series

  USA Industrials

  Also known as one touch fittings, these tube fittings are designed to slide into the fitting with an internal grasping ring holding it in place. Intended for low pressure applications and for use with plastic and soft metal tubing. Nylon is well suited for air applications.

  Days to Ship:	13 Days

• 

  New Joint GWS □-□-E Series

  CKD

  Push-in fitting for pneumatic piping. Compact size for space saving. Work environment and device-friendly flame-resistant white body.
  Bulkhead female fitting

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  New Joint GWS □-□-M Series

  CKD

  Push-in fitting for pneumatic piping. Compact size for space saving. Work environment and device-friendly flame-resistant white body.
  Female straight fitting

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  New Joint GWS □-□-S Series

  CKD

  Push-in fitting for pneumatic piping. Compact size for space saving. Work environment and device-friendly flame-resistant white body.
  Single straight fitting

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  New Joint GWS□-□ Series [1 to 10 Pieces/Pack]

  CKD

  Push-in fitting for pneumatic piping. Compact size for space saving. Work environment and device-friendly flame-resistant white body.
  Single straight fitting

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

Loading...