(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
General Piping Use Tube Fitting, Elbow
Nihon Pisco
[Features]
· One-touch fitting for general pneumatic pipes.
· Rich lineup.
· The take-off angle of the resin body can be changed after mounting.
· Centralized piping is supported.
· Light gray and clean room packaged types are available as options.
· Clean room packaging specification uses fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | Same day or more |
---|
Show Stock Products
Junron One-Touch Fitting W Series (Spot Welding Equipment for Piping) Elbow
Junkosha
Nonflammable. Superior body strength and impact resistance. The tube grip is equipped with a rotating mechanism. All the sealing materials are water resistant NBR. No sealing tape is required. The R (PT) threads and resin connecting parts rotate.
[Features]
· All the resin sections conform to the UL94V-0 flame retardant rating.
· The pull-out strength of the R (PT) thread resin press-fit part has been improved in comparison to conventional parts.
· The shock resistance has been significantly improved by a new mechanism tube grip.
· The tube clip rotates smoothly inside the fitting and prevents tube from breaking due to rotation of the tube.
· NBR is used in the water-resistant O-ring and V-seal.
· The R (PD) threads are sealed. Therefore, wrapping the threads with sealing tape is not required.
· The combined part of the R (PT) thread of elbow tee and resin part can be rotated. After connecting, tube-piping direction can be freely implemented and the threads can be tightened even while the resin part is fixed.
Days to Ship: | 8 Days or more |
---|
Chemifit C1 Series, 90° Elbow EL-C1
Nitta
90° Elbow EL-C1 is treated with a process that uses absolutely no oil. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.
Days to Ship: | 8 Days or more |
---|
Tube Fitting Branch Female Elbow for General Piping
Nihon Pisco
[Features]
· One-touch fitting for general pneumatic pipes.
· Various products available.
· Can change the take-off angle of the resin body after mounting.
· Centralized piping is enabled.
· Light gray types, and clean room packaged types optionally available.
· Clean room packaging specifications define the use of fluorinated grease.
· After purification with clean air, the item is package in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | 8 Days or more |
---|
Tube Fitting Universal Elbow with Hexagonal Hole for Standard Pipe
Nihon Pisco
Many types of one-touch fittings for standard piping.
[Features]
· One-touch fitting for general pneumatic pipes.
· Can change the take-off angle of the resin body after mounting.
· Diverse lineup.
· Centralized piping is supported
Days to Ship: | Same day or more |
---|
Show Stock Products
for Clean Environment, Tube Fitting Polypropylene Type Elbow
Nihon Pisco
[Features]
· Polypropylene Material used for Clean Environment
· EPDM used for Rubber Seal.
· Oil-Free
· Visible Fluid by Transparent Body Color.
· Clean-Room packaging Option.
Days to Ship: | 8 Days or more |
---|
Touch Connector Elbow Connector
Chiyoda
A vacuum-compatible one-touch fitting that boasts great drawing strength and durability. Elbow connector selectable from metal and resin.
Days to Ship: | Same day or more |
---|
Show Stock Products
Tube Fitting Universal Elbow for Standard Pipe
Nihon Pisco
Many types of one-touch fittings for standard piping.
[Features]
· One-touch fitting for general pneumatic pipes.
· Can change the take-off angle of the resin body after mounting.
· Diverse lineup.
· Centralized piping is supported
Days to Ship: | 8 Days or more |
---|
One-Touch Fitting KQ2 Series Male Elbow KQ2L (Gasket Seal)【5-10 Pieces Per Package】
SMC
A one-touch fitting by SMC.
[Features]
· Improved tube insertion/removal.
· Compact and lightweight.
· Can be used with a vacuum pressure of -100 kPa or more.
· Body shape: Total of 51 models.
· Thread part material / surface treatment (with/without): 2 types.
· Available surface treatment: brass (no plating), brass + electroless nickel plating.
[Applications]
· Use for piping from female threads at right angles.
[See here for catalog]
· Applicable tube outer diameter (metric), Connection thread [M], Release button: oval (pp. 11) / circle (pp. 108)
· Applicable tube outer diameter (inches), Connection thread [UNF], Release button: oval (pp. 35) circle (pp. 140)
· Applicable tube outer diameter (inches), Connection thread [M], Release button: oval (pp. 52) / circle (pp. 160)
· Applicable tube outer diameter (metric), Connection thread [Uni], Release button: oval (pp. 90) / circle (pp.204)
· Applicable tube outer diameter (inches), Connection thread [Uni], Release button: oval (pp. 98) / circle (pp. 212)
Days to Ship: | Same day or more |
---|
Show Stock Products
CKD
Push-in fitting for pneumatic piping. Compact size for space saving. Work environment and device-friendly flame-resistant white body.
Single elbow fitting
Days to Ship: | Same day or more |
---|
Show Stock Products
for Corrosion Resistance, Corrosion Resistant SU303 Equivalent Fitting, Elbow
Nihon Pisco
No copper-based metal used. Optimal for handling low concentrations of ozone.
Days to Ship: | Same day or more |
---|
Show Stock Products
Mold Cooling Mold Temperature Control Joints Stop Valve Built-in Type One-Touch Fitting Elbow
Nihon Pisco
One-touch fittings for mold cooling. No protrusions remain on the die after the plug is removed.
[Features]
•One-touch fittings for mold cooling.
•The usable fluid includes 3 types: heating medium oil, (fresh) water and air.
· No protrusions remain on the die after the plug is removed.
· Built-in type stop valve prevents warm water outflow when the plug is attached or removed.
Days to Ship: | 15 Days or more |
---|
for Fixture Cooling Fixture Temperature Adjustment Fitting Elbow with One Touch Fitting Plug
Nihon Pisco
One-touch fitting for mold cooling. No projections remain on the die after the plug is removed.
[Features]
· One-touch fitting for mold cooling.
· Working fluids include 3 types: thermal oil, (fresh) water and air.
· No protrusion on the mold remains after the plug is removed.
· Stop valve built-in type prevents warm water outflow when the plug is attached or removed.
Days to Ship: | 8 Days or more |
---|
Touch Connector Five Male Elbow
Chiyoda
Lightweight, one-touch fitting with a flame-retardant resin. Male elbows.
[Features]
· Unnecessary parts have been eliminated and the sizes of remaining parts have been minimized to achieve the ultimate cost performance.
· Further weight reduction achieved by making body parts all resin.
· Utilized a new lock ring to achieve a joint function to perform piping work more smoothly and securely.
· Used new packing to reduce the connecting operation force while maintaining high airtightness.
· The model identifiers have been inscribed on products using an all-item laser marking process.
· A standard, flame-retardant resin has been adopted.
· Screw part sealing (R screw): Can be used for piping as-is because the threaded part has been sealed.
· The body and screw parts of elbows can rotate.
*This is not a rotary type. Note that all-resin types do not rotate.
Days to Ship: | Same day or more |
---|
Show Stock Products
Touch Connector Five, Single Tabular
Chiyoda
[Features]
· TCV is composed of only five components. Fewer-components lower the cost considerably.
· A solid resin body type is available in both male and elbow connector styles.
· A newly designed stainless-steel locking ring assures a complete tube connection
· A newly designed ring backing assures a complete seal.
Days to Ship: | 8 Days or more |
---|
Touch Connector H Type Elbow Connector
Chiyoda
A one-touch fitting with high pull-out strength and durability. Metal elbow connector.
[Features]
· Utilizes a special locking ring to provide maximum pull-out force and durability for this one-touch fitting.
· The O-ring has been replaced with a Viton® packing seal to support high temperatures. Optimally suited to P flexible piping (please install an OF, such as CKN-6-01-H-OF, at the end).
· To insert multilayered tubing, peel off the outer section and install the one-touch coupling.
· The life of the tube can be increased significantly by fitting a standard metal cap to prevent exposure of the inner tube.
· All-metal types have exceptional strength under tough conditions.
· Thread section sealing (R thread): The thread section is sealed. Therefore, the fitting can be used directly for piping.
· The body and thread section of the elbows and branch tee are rotatable.
· *This is not a rotary type fitting.
Days to Ship: | 8 Days or more |
---|
Junron One-Touch Fitting M Series (for General Piping) Elbow
Junkosha
[Features]
· Electroless nickel plating is as standard applied to metal parts.
· The nickel plating in all brass parts of M series nipples and plastic bodies is standardized.
· Color seal for seal identification.
· Each of the different types of R (PT) screws is coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
· You can position the body in accordance with the removing direction of the tube.
・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.
▪ The tube grip comes with a rotating mechanism.
▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.
Days to Ship: | 8 Days or more |
---|
PushOne E Series 90 Degree Elbow
Nitta
A 90-degree elbow that does not require jigs or tools for connecting to tubes. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
[Features]
· The tubes are PushOne® type fittings.
· Requires no jigs or tools for connect to the tubes.
· An electrogalvanized product.
· Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
· A flame retardant resin (UL94 V-0 standard EQUIV) is utilized.
· A flame-retardant PBT resin is utilized in the material.
· A UL94 V-0 standard fitting with superior self-extinguishing properties.
· This fitting is usable in spatter dispersion environments.
· The R threads are sealed. Therefore, wrapping the threads with sealing tape is not required.
Days to Ship: | 7 Days or more |
---|
PushOne E Series Brass Body Type - 90 Degree Elbow
Nitta
No jigs or tools are required. Combine with a UE tube for conductivity. Supports UL94 standard V-0 equivalent for self-extinguishing. For use in environments with spatters.
Days to Ship: | 7 Days or more |
---|
One-Touch Fitting KQ2 Series Male Elbow KQ2L (Sealant / No Sealant)【5-10 Pieces Per Package】
SMC
A one-touch fitting by SMC.
[Features]
· Improved tube insertion/removal.
· Compact and lightweight.
· Can be used with a vacuum pressure of -100 kPa or more.
· Body shape: Total of 51 models.
· Thread part material / surface treatment (with/without): 2 types.
· Available surface treatment: brass (no plating), brass + electroless nickel plating.
[Applications]
· Use for piping from female threads at right angles.
[See here for catalog]
· Applicable tube outer diameter (metric), Connection thread [R], Release button: oval (pp. 11) / circle (pp. 108)
· Applicable tube outer diameter (inches), Connection thread [NPT], Release button: oval (pp. 35) circle (pp. 140)
· Applicable tube outer diameter (inches), Connection thread [R], Release button: oval (pp. 52) circle (pp. 160)
Days to Ship: | Same day or more |
---|
Show Stock Products
SMC
A one-touch fitting by SMC.
[Features]
· Improved tube insertion/removal.
· Compact and light weight.
[Applications]
· A male elbow with a hexagon socket on the head of the body that can be used for tightening with a hex wrench. Ideal for use in confined spaces.
[See here for catalog]
· Applicable tube outer diameter (metric), Connection thread [R], Release button: oval (pp. 14) circle (pp. 112)
· Applicable tube outer diameter (inches), Connection thread [NPT], Release button: oval (pp. 38) circle (pp. 143)
Days to Ship: | 3 Days or more |
---|
New Joint Mini Type GWJL □-□ Series
CKD
[Features]
· Space saving type with more compact body size.
· Piping dead space can be markedly reduced
· Single elbow type
Days to Ship: | 8 Days or more |
---|
for Clean Environment, Tube Fitting Polypropylene Type Elbow, Screw Element SUS304
Nihon Pisco
[Features]
· This tube fitting serves best where strength is required or the atmosphere contains chemicals.
· Seal material is made of FKM.
· Metal unit is made of SUS304.
Days to Ship: | Same day or more |
---|
Show Stock Products
for Chemicals, Tube Fitting Chemical Type Elbow
Nihon Pisco
PPS is used for the main body material for excellent heat resistance, flame retardancy, and chemical resistance.
[Features]
· PPS is used for the main body material for excellent heat resistance, flame retardancy (UL94V-0), and chemical resistance.
· FKM is a use option for the seal. Other options include NBR and EPDM.
· None of the parts used must be exposed to grease.
· Also compliant with the Food Sanitation Law of Japan (FKM type only).
· No need to worry about rust or metal ions.
· Two packaging specifications are available to suit the application, normal packaging and clean room packaging.
Days to Ship: | Same day or more |
---|
Show Stock Products
General Piping Use Tube Fitting, 45° Elbow
Nihon Pisco
A rich assortment of one-touch fittings for general piping.
[Features]
· One-touch fitting for one-touch fitting general pneumatic pipes for general pneumatic piping.
· Varied lineup.
· The take-off angle of the resin body can be changed after mounting.
· Centralized piping is enabled.
Days to Ship: | Same day or more |
---|
Show Stock Products
Tube Fitting Branch Female Universal Elbow for General Piping
Nihon Pisco
[Features]
· One-touch fitting for general pneumatic pipes.
· Rich lineup.
· The take-off angle of the resin body can be changed after mounting.
· Centralized piping is supported.
· Light gray and clean room packaged types are available as options.
· Clean room packaging specification uses fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | 8 Days or more |
---|
General Piping Use Tube Fitting, Long Elbow
Nihon Pisco
A wide variety of single action fittings for general piping.
[Features]
· Single action fitting for general pneumatic piping.
· After mounting, the resin unit's removal angle can be changed.
· An extensive lineup of products.
· Allows for centralized piping.
Days to Ship: | Same day or more |
---|
Show Stock Products
for General Piping, Tube Fitting Mini-Type, 45° Elbow
Nihon Pisco
[Features]
· Ultra-small one-touch fitting for general pneumatic pipes.
· Reduced size with a volume ratio of 40% over the standard type.
· Elliptical release ring allows easy tube release.
· The φ1.8 mm type is an industry-first minimum one-touch type.
· Optimum for piping of small actuators and the like.
· Light gray types, and clean room packaged types are available as options.
· Clean room packaging specifications define the use of fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | 8 Days or more |
---|
Tube Fitting Mini-Type Long Elbow for General Piping
Nihon Pisco
[Features]
· Ultra-small one-touch fitting for general pneumatic pipes.
· Reduced size with a volume ratio of 40% over the standard type.
· Elliptical release ring allows easy tube release.
· The φ1.8 mm type is an industry-first minimum one-touch type.
· Optimum for piping of small actuators and such.
· Light gray types, and clean room packaged types available as options.
· Clean room packaging specifications define the use of fluorinated grease.
· After purification with clean air, the item is package in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | 8 Days or more |
---|
Tube Fitting Mini Type Hexagonal Socket Head Universal Elbow for General Piping
Nihon Pisco
[Features]
· Ultra-small one-touch fitting for general pneumatic piping.
· Reduced size with a volume ratio of 40% compared to standard models.
· Elliptical release ring allows easy tube release.
· The φ1.8 mm type is an industry-first minimum one-touch type.
· Optimum for piping in small actuators, etc.
· Light gray and clean room packaged types available as options.
· Clean room packaging specification uses fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | 8 Days or more |
---|
Tube Fitting Mini-Type Hexagonal Socket Head Universal Elbow for General Piping
Nihon Pisco
[Features]
· Ultra-small one-touch fitting for general pneumatic pipes.
· Reduced size with a volume ratio of 40% over the standard type.
· Elliptical release ring allows easy tube release.
· The φ1.8 mm type is an industry-first minimum one-touch type.
· Optimum for piping of small actuators and the like.
Days to Ship: | 12 Days or more |
---|
for Anti Static, Tube Fitting EG, Elbow
Nihon Pisco
Optimal for lines requiring static electricity dissipation and anti-static properties.
Days to Ship: | 8 Days or more |
---|
Tube Fitting Sputter Elbow for Sputtering Resistance
Nihon Pisco
[Features]
· Flame-retardant resin is used.
· Sputter resistance property (spark) is superior (V-0 equivalent*).
· *UL94 V-0: Standard enacted by an American private test institution (established by an American fire underwriter) which ranks self-extinguishing materials based on four levels: V-0, V-1, V-2, and HB, where V-0 is the most difficult rank to achieve.
· Equipped with release ring cover.
· Prevents operation failure of release ring caused by sputtering.
Days to Ship: | 6 Days or more |
---|
Tube Fitting Brass Elbow for Sputter Resistance
Nihon Pisco
The main body and release ring are made of brass for superior flame retardancy and sputtering resistance.
[Features]
· Available sealing rubber materials include HNBR, FKM, and NBR.
· Ideal for environments exposed to sparks.
· Release ring made of brass offers excellent flame retardancy and sputter resistance.
· The type with a cover prevents dust and sputter from getting through to the internal fittings.
· An optional sputter cover prevents fine sparks from entering.
· By using a release ring cover (CS – sold separately), sparks that penetrate through the gap between the release ring and the tube cannot get close.
Days to Ship: | Same day or more |
---|
Show Stock Products
for Sputtering Resistance, Tube Fitting Brass Elbow, Coverless
Nihon Pisco
[Features]
· Superior in Flame-Retardant and Spatter-Proof by its Brass Made Release-Ring.
· Avoids Spatter and Dusts by Optional Protective Cover.
· HNBR or FKM for Seal Rubber Selection
Days to Ship: | Same day or more |
---|
Show Stock Products
for Sputtering Resistance, Tube Fitting Brass, Universal Elbow
Nihon Pisco
[Features]
· Superior in Flame-Retardant and Spatter-Proof by its Brass Made Release-Ring.
· Avoids Spatter and Dusts by Optional Protective Cover.
· HNBR or FKM for Seal Rubber Selection
Days to Ship: | Same day or more |
---|
Show Stock Products
for Sputtering Resistance, Tube Fitting Brass, Universal Elbow, Coverless
Nihon Pisco
[Features]
· Superior in Flame-Retardant and Spatter-Proof by its Brass Made Release-Ring.
· Avoids Spatter and Dusts by Optional Protective Cover.
· HNBR or FKM for Seal Rubber Selection
Days to Ship: | Same day or more |
---|
Show Stock Products
for Corrosion Resistance, SUS304 Fitting, Elbow
Nihon Pisco
[Features]
· This tube fitting serves best where strength is required or the atmosphere contains chemicals.
· Seal material is made of FKM.
· Metal unit is made of SUS304,
Days to Ship: | 8 Days or more |
---|
Nihon Pisco
[Features]
· Push-In Fitting Type for Die Temperature Control.
· Thermal Oil, Clean Water and Air for Fluid Medium.
· No Projection left on the die, after uncoupling Plug.
· Stop Valve Built-In Type prevents Hot Water Ejection when uncoupling Plug.
Days to Ship: | 15 Days or more |
---|
Mold Cooling, Mold Temperature Control Joints, One-Touch Fitting Elbow
Nihon Pisco
One-touch fittings for mold cooling. No protrusions remain on the die after the plug is removed.
[Features]
•One-touch fittings for mold cooling.
•The usable fluid includes 3 types: heating medium oil, (fresh) water and air.
· No protrusions remain on the die after the plug is removed.
· Built-in type stop valve prevents warm water outflow when the plug is attached or removed.
Days to Ship: | 8 Days or more |
---|
Touch Connector Five, Long Male Elbow
Chiyoda
[Features]
· TCV is composed of only five components. Fewer-components lower the cost considerably.
· A solid resin body type is available in both male and elbow connector styles.
· A newly designed stainless-steel locking ring assures a complete tube connection
· A newly designed ring backing assures a complete seal.
Days to Ship: | 8 Days or more |
---|
Touch Connector Five SUS Male Elbow
Chiyoda
Stainless steel one-touch fitting with improved strength and corrosion resistance. Male Elbows.
[Features]
· Improved strength and corrosion resistance.
· Prevents elution of metal ions such as copper and zinc.
· Component corrosion prevention for industrial piping (de-zincification corrosion): improved performance via use of SUS303 for the metal portion of the main body.
· Inherits the high performance of the touch connector five: inherits the performance of touch connector five as-is.
· Upper threading flexibility: the elbow and branch tee part body and thread elements can be rotated.
· Not a rotary type.
· No attempt was made to seal the threaded part given concerns regarding clean piping.
Days to Ship: | 8 Days or more |
---|
Touch Connector FUJI Male Elbow
Chiyoda
A one-touch fitting with a rotation locking ring to prevent from turning and breaking. A male elbow with a body manufactured from metal or resin.
[Features]
· All-metal type fittings demonstrate excellent strength under tough conditions. The resin body type fittings are lightweight.
· Pipes connected to different machines can be easily identified by attaching display rings (sold separately).
· A rotating locking ring type for preventing full rotation of the tubes.
· The threaded section has been seal processed—enabling pipes to be used directly.
· The body and thread section of the elbows and branch tee are rotatable.
· *This is not a rotary type fitting.
Days to Ship: | Same day or more |
---|
Show Stock Products
Touch Connector FUJI Long Male Elbow
Chiyoda
[Features]
· One-touch fitting with rotation lock ring that prevents full rotation of the tube.
· Long male elbow with a body available in metal and plastic.
Days to Ship: | 13 Days or more |
---|
Touch Connector Fuji, Single Banjo
Chiyoda
[Features]
· Selectable main body material of metal or resin types.
· One-touch connection and disconnection without tools.
· Color ring accessory can be attached for easier identification.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Type |
Body Material |
Seal Material |
Thread Portion Material |
Application |
Applicable Fluid |
Fitting Type |
Screw Mounting, Direction |
Elbows |
Screw Mounting, Branch |
Union, Equal Dia. |
Union, Unequal Dia. |
Sockets, Reducers |
For Swivel Part, Rotation Part |
Other Shapes |
Branch A |
Tube Size 1(φ) |
Tube Size 2(φ) |
Brand | Nihon Pisco | Junkosha | Nitta | Nihon Pisco | Nihon Pisco | Nihon Pisco | Chiyoda | Nihon Pisco | SMC | CKD | Nihon Pisco | Nihon Pisco | Nihon Pisco | Chiyoda | Chiyoda | Chiyoda | Junkosha | Nitta | Nitta | SMC | SMC | CKD | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Chiyoda | Chiyoda | Chiyoda | Chiyoda | Chiyoda |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Junron One-Touch Fitting W Series (Spot Welding Equipment for Piping) Elbow | Tube Fitting Universal Elbow with Hexagonal Hole for Standard Pipe | for Clean Environment, Tube Fitting Polypropylene Type Elbow | One-Touch Fitting KQ2 Series Male Elbow KQ2L (Gasket Seal)【5-10 Pieces Per Package】 | for Corrosion Resistance, Corrosion Resistant SU303 Equivalent Fitting, Elbow | Mold Cooling Mold Temperature Control Joints Stop Valve Built-in Type One-Touch Fitting Elbow | for Fixture Cooling Fixture Temperature Adjustment Fitting Elbow with One Touch Fitting Plug | Junron One-Touch Fitting M Series (for General Piping) Elbow | One-Touch Fitting KQ2 Series Male Elbow KQ2L (Sealant / No Sealant)【5-10 Pieces Per Package】 | for Clean Environment, Tube Fitting Polypropylene Type Elbow, Screw Element SUS304 | Tube Fitting Branch Female Universal Elbow for General Piping | Tube Fitting Mini Type Hexagonal Socket Head Universal Elbow for General Piping | Tube Fitting Mini-Type Hexagonal Socket Head Universal Elbow for General Piping | for Sputtering Resistance, Tube Fitting Brass Elbow, Coverless | for Sputtering Resistance, Tube Fitting Brass, Universal Elbow | for Sputtering Resistance, Tube Fitting Brass, Universal Elbow, Coverless | Mold Cooling, Mold Temperature Control Joints, One-Touch Fitting Elbow | ||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
Days to Ship |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 15 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 7 Days or more | 7 Days or more |
Same day or more
Show Stock Products | 3 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 8 Days or more | 6 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 15 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 13 Days or more | 8 Days or more |
Type | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings |
Body Material | Standard (PBT Polybutylene Terephthalate) | Flame Resistant Resin (UL94 V-0 equivalent) | PP Resin | - | - | PP Resin | Brass / Others | - | Standard (PBT Polybutylene Terephthalate) / Stainless Steel303, Stainless Steel304 / Flame Resistant Resin (UL94 V-0 equivalent) | Flame Resistant Resin (UL94 V-0 equivalent) | - | Brass | Brass | Standard (PBT Polybutylene Terephthalate) | Standard (PBT Polybutylene Terephthalate) | Brass | Standard (PBT Polybutylene Terephthalate) | Flame Resistant Resin (UL94 V-0 equivalent) | Brass | Standard (PBT Polybutylene Terephthalate) / Stainless Steel303, Stainless Steel304 | Standard (PBT Polybutylene Terephthalate) | Standard (PBT Polybutylene Terephthalate) | PP Resin | PPS Resin | - | - | - | - | - | - | - | Static Dissipation Resin | Flame Resistant Resin (UL94 V-0 equivalent) | Brass | Brass | Brass | Brass | - | Brass | Brass | Standard (PBT Polybutylene Terephthalate) | Standard (PBT Polybutylene Terephthalate) | Others | Others | Others |
Seal Material | - | Standard (NBR Nitrile Rubber ) | EPDM Synthetic Rubber | - | - | Fluororubber / EPDM Synthetic Rubber | Standard (NBR Nitrile Rubber ) | - | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | - | - | - | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | H-NBR | H-NBR | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | EPDM Synthetic Rubber | Standard (NBR Nitrile Rubber ) / Fluororubber / EPDM Synthetic Rubber | - | - | - | - | - | - | - | - | - | Fluororubber / H-NBR | Fluororubber / H-NBR | - | - | - | - | - | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) |
Thread Portion Material | Standard (Brass) | Standard (Brass) | PP Resin | - | - | PP Resin | Standard (Brass) | - | Standard (Brass) | Standard (Brass) | - | - | - | Standard (Brass) / Others | Standard (Brass) | Standard (Brass) | Others | Standard (Brass) | Standard (Brass) | Standard (Brass) | - | Standard (Brass) | - | PPS Resin | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Standard (Brass) | Stainless Steel303, Stainless Steel304 | Standard (Brass) | Standard (Brass) | Standard (Brass) |
Application | Standard, Mini / Clean Environment | Standard, Mini | Standard, Mini / Clean Environment | Standard, Mini | Standard, Mini | Clean Environment / Food, Pharmaceutical Related | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Mold Temperature Adjustment | Mold Temperature Adjustment | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Clean Environment / Food, Pharmaceutical Related | Clean Environment / Food, Pharmaceutical Related / Heat Resistant | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini / Clean Environment | Standard, Mini | Standard, Mini | Static DissipationAntistatic | Sputter Resistant | Static DissipationAntistatic / Sputter Resistant / Heat Resistant | Static DissipationAntistatic / Sputter Resistant / Heat Resistant | Static DissipationAntistatic / Sputter Resistant / Heat Resistant | Static DissipationAntistatic / Sputter Resistant / Heat Resistant | Standard, Mini / Food, Pharmaceutical Related | Mold Temperature Adjustment | Mold Temperature Adjustment | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini |
Applicable Fluid | Water / Air | Water / Air | Water / Air / Chemical, Solvent | Water / Air | Water / Air | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air | Water / Air | Water / Air | Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Air | Water / Air | Water / Air | Air | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air | Water / Air | Water / Air | Air | Air | Air | Air | Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air | Water / Air | Water / Air | Water / Air | Air | Air | Air |
Fitting Type | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction | Screw Mounting, Direction |
Screw Mounting, Direction | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows | Elbows |
Elbows | Male Elbows | Male Elbows | Male Elbows | Female Elbows | Universal Elbows with Hex Socket | Male Elbows | Male Elbows | Universal Elbows | Universal Elbows | Male Elbows | Male Elbows | Male Elbows | Male Elbows | Male Elbows | Universal Elbows | Male Elbows | Male Elbows | Male Elbows | Male Elbows | Universal Elbows | Universal Elbows with Hex Socket | Male Elbows | Male Elbows | Male Elbows | 45° Elbow | Female Universal Elbows | Long Elbows | 45° Elbow | Long Elbows | - | - | Male Elbows | Male Elbows | Male Elbows | Male Elbows | Universal Elbows | Universal Elbows | Male Elbows | Male Elbows | Male Elbows | Long Elbows | Male Elbows | Male Elbows | Long Elbows | Universal Elbows |
Screw Mounting, Branch | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Union, Equal Dia. | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Union, Unequal Dia. | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Sockets, Reducers | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
For Swivel Part, Rotation Part | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Other Shapes | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Branch A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tube Size 1(φ) | 3.97 ~ 16 | 6 ~ 12 | 4 ~ 12.7 | 3.97 ~ 12.7 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 3.97 ~ 16 | 4 ~ 10 | 4 ~ 12 | 4 ~ 16 | 6 ~ 12 | 6 ~ 10 | 4 ~ 16 | 4 ~ 12 | 6 ~ 12 | 4 ~ 12 | 6.35 ~ 16 | 6 ~ 12 | 4 ~ 10 | 4 ~ 10 | 4 ~ 6 | 4 ~ 12 | 4 ~ 12 | 8 ~ 16 | 3.97 ~ 12.7 | 3.97 ~ 12.7 | 3 ~ 6 | 1.8 ~ 6.35 | 3 ~ 6 | 3 ~ 6 | 3 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 16 | 6 ~ 12 | 6 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 |
Tube Size 2(φ) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Applicable Tube O.D.1>2>3
Applicable Tube O.D.1>2>3
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy