(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Indexing Plungers（Locking Mechanism：None）
Type
-
Standard Knob -
Lever Type -
With Ring -
Related Components -
No Knob -
Special Knob
-
Indexing Plungers - With mounting plate, selectable handle, PBX series.
NBK
Indexing plungers integrated with a mounting flange. Suitable for mounting to panel surfaces on equipment/devices, etc.
- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - With/without knob, fine thread, PXX series.
NBK
Indexing or positioning pin. Good abrasion resistance.
[Features]
- Indexing or positioning pin.
- New standards for [PXXS-S] and [PXXS-SK] with stainless steel knobs.
- Pin is hardened (steel) or nickel-plated (stainless steel). Excels in abrasion resistance.
- If the threaded part is too long for the mounting surface, use the [PXC] indexing plunger collar instead.
- Use a locking service for fixing indexing plungers.- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - Lever Type, PDV series.
NBK
[Features]
- This index plunger has a lever that can be turned to insert or remove the pin.
Operation of the plunger is carried out by three types of movement.
Standard Models (PDV-A, PDV-AK)
Pin retracts into the body when the lever is rotated 90°
Force from the internal spring returns the pin to its original position when the lever is released
Holding Models (PDV-B, PDV-BK)
Pin does not retract when the lever is released at a position of 120°
Force from the internal spring returns the pin to its original position when the lever is rotated slightly in the opposite direction
Locking Models (PDV-C, PDV-CK)
Pin retracts into the body when the lever is rotated 120°
When the pin is retracted, the guide pin is locked inside the slot
Pin can be unlocked by slightly pulling on the lever while rotating it in the opposite direction
Force from the internal spring returns the pin to its original position when the lever is rotated slightly
PDV-A, PDV-B, and PDV-C has no lock nut and can be used to prevent loosening
PDV-AK, PDV-BK, and PDV-CK have lock nuts and can be used to fix pins in place- Volume Discount
Days to Ship: 11 Days or more -
Indexing Plungers - Flanged knob type, PLX series.
NBK
[Features]
- Indexing plunger for accurate positioning.
- H7 pin diameter tolerance.
- G6 hole tolerance recommended for the mating side.
- Use with the positioning bushings for precise positioning.- Volume Discount
Days to Ship: 11 Days or more -
Indexing Plungers - With ball shaped knob, IP-5 series.
Konishi
Indexing plungers with a grip ball attached to the knob.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Indexing Plungers - With T-handle, IP-6 series.
Konishi
Indexing plungers with no tee handle attached to the knob.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plungers - Compact, PHX Series.
NBK
[Features]
- Compact indexing plunger.
- Metal part unexposed after mounting.
- Nickel-plated pin.
- Superior abrasion resistance.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Indexing Plungers - Short Thread Length, PSX Series.
NBK
Short type that can be mounted directly to a thin frame.
- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - Knob type, flanged, PFX series.
NBK
[Features]
· A flanged type indexing plunger that is mounted using countersunk bolts and rivets etc.
· The long pin type PFX-H-A (long pin type) is ideal for mounting thick panels and frames etc.
· The pin has undergone hardening and offers excellent abrasion resistance.- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - With selectable stroke, PLX series.
NBK
Two types of standardized stroke for each pin diameter. For indexing or positioning.
[Features]
- Two types of standardized stroke for each pin diameter (except for φ10 and φ12).
- For indexing or positioning.
- Pin is hardened (steel) or nickel-plated (stainless steel). Excellent abrasion resistance.
- If the threaded part is too long for the mounting surface, use the PXC indexing plunger collar instead.- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - Knob type, fine/coarse thread, PMX series.
NBK
Simple structure index plunger.
[Features]
· Superior cost performance.
· For all pin diameters, coarse thread and fine thread are standardized.
· Can select main body material quality and whether or not to include a lock nut using the product code.
[Applications]
· For positioning workpieces.
· For attaching and detaching workpieces.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Indexing Plungers - Plate Mount, PPX series.
NBK
[Features]
- Indexing plunger that can be mounted on a thin plate.
- Optimal for positioning and fixing the cases/covers of electronic/communication equipment.
- Fixing nut can be removed.
- Mount with a plate clamped with the fixing nut.
- Two types of pin lengths standardized for each pin diameter.
- Nickel-plated pin.
- Superior abrasion resistance.- Volume Discount
Days to Ship: 11 Days or more -
Indexing Plungers - With/without knob, fine thread, PXZ series.
NBK
[Features]
- The screw itself can be screwed entirely into devices, with only the knob remaining visible.
- Attractive design.
- The locking pin is available in hardened (steel) or nickel-plated (stainless steel) versions.
- Highly resistant to wear and tear.
- The knob used is the newly standardized stainless steel knob used in FXZS-Z and PXZS-SK.
- Use to prevent loosening of index plungers.- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - Knob type, fine thread, stainless steel, NDXN-ASUS series.
Imao
Made entirely of stainless steel, this product is ideal for areas demanding rust-proofing as well as clean environments. Two types of noses are available: hardened and non-hardened.
- Volume Discount
Days to Ship: 8 Days or more -
Indexing Plungers - Knob Type, Flanged, IPF Series.
Konishi
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. An index plunger with a fixed countersunk screw.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plungers - With Clamp Ring, IPR series.
Konishi
Pulling the ring retracts the center pin; releasing it returns the center pin to its original position by using the force of the spring. Can be used to calculate and select the position of jigs.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Indexing Plungers - Knob Type, Return Type, IP Series.
Konishi
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Indexing Plungers - Return Type, without Hex Collar, IPN Series.
Konishi
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions. All screws are embedded into the device, only leaving the knob on the surface and making it look more attractive.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plungers - Knob Type, Return Type, IP-1 Series.
Konishi
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Indexing Plungers - Knob Type, Press Fit, IPW Series.
Konishi
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions when welding or fuse mounting.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plungers - Knobless, Press Fit, IPWN Series.
Konishi
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions when welding or fuse mounting.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plungers - Without Knob, Without Hex Collar, IP-3 Series.
Konishi
Knobless indexing plungers.
For complete product overview and details on Indexing Plunger IP-3 see the sections below:- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plungers - Without Knob, with Hex Collar, IP-4 Series.
Konishi
Knobless indexing plungers.
For complete product overview and details on Indexing Plunger IP-4 see the sections below:- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Indexing Plunger - With knob, return type, IP-1-SUS series.
Konishi
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type |
| Locking Mechanism |
| Mounting Method |
| Overall Length |
| Body Material |
| All Stainless |
| Nose Material |
| Body O.D./Thread M(mm) |
| Stroke S(mm) |
| Nose Surface Treatment |
| Nose Heat Treatment |
| Nose O.D. d(Ø) |
| Length L(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NBK | NBK | NBK | NBK | Konishi | Konishi | NBK | NBK | NBK | NBK | NBK | NBK | NBK | Imao | Konishi | Konishi | Konishi | Konishi | Konishi | Konishi | Konishi | Konishi | Konishi | Konishi |
| Product Series | Indexing Plungers - With mounting plate, selectable handle, PBX series. | Indexing Plungers - With/without knob, fine thread, PXX series. | Indexing Plungers - Knob type, fine/coarse thread, PMX series. | Indexing Plungers - With/without knob, fine thread, PXZ series. | Indexing Plungers - Knob type, fine thread, stainless steel, NDXN-ASUS series. | Indexing Plungers - Return Type, without Hex Collar, IPN Series. | Indexing Plungers - Without Knob, Without Hex Collar, IP-3 Series. | Indexing Plungers - Without Knob, with Hex Collar, IP-4 Series. | ||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 8 Days or more | 8 Days or more | 11 Days or more | 11 Days or more | 8 Days or more | 10 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 11 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more |
| Type | Standard Knob | Standard Knob / No Knob | Lever Type | Standard Knob | Special Knob | Special Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob / No Knob | Standard Knob | Standard Knob | Special Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob | No Knob | No Knob | No Knob | Standard Knob |
| Locking Mechanism | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None |
| Mounting Method | Flange | Screw-In | Screw-In | Flange | Screw-In | Screw-In | Screw-In | Screw-In | Flange | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Flange | Screw-In | Screw-In | Screw-In | Screw-In | Press Fit | Press Fit | Screw-In | Screw-In | Screw-In |
| Overall Length | Standard / Short | Standard | Standard | Short | Standard | Standard | Short | Short | Short | Standard | Standard | Short | Standard | Standard | Short | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Body Material | Zinc Die Cast | Steel / Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel / Stainless Steel | Zinc Die Cast | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Stainless Steel | Zinc Die Cast | Steel | Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel |
| All Stainless | Not Compliant | Applicable / Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Applicable / Not Compliant | Applicable | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant | Not Compliant |
| Nose Material | Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel | Steel | Steel | Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Stainless Steel | Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel | Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel |
| Body O.D./Thread M(mm) | 6 ～ 12 | 10 ～ 20 | 16 | - | 10 ～ 20 | 12 ～ 20 | 8 ～ 10 | 12 ～ 16 | 10 ～ 12 | 8 ～ 20 | 6 ～ 12 | 10 ～ 12 | 10 ～ 20 | 8 ～ 20 | 10 ～ 12 | 6 ～ 12 | 6 ～ 12 | 10 ～ 20 | 8 ～ 16 | 12 ～ 18 | 18 | 10 ～ 20 | 10 ～ 16 | 8 ～ 16 |
| Stroke S(mm) | 4 ～ 8 | 5 ～ 10 | 8 | 10 ～ 12 | 5 ～ 10 | 6 ～ 10 | 5 ～ 7 | 6 ～ 8 | 6 ～ 8 | 4 ～ 15 | 4 ～ 8 | 6 ～ 7.5 | 5 ～ 10 | 4 ～ 10 | 6 ～ 18 | 4 ～ 8 | 4 ～ 8 | 5 ～ 10 | 4 ～ 8 | 5 ～ 8 | 8 | 5 ～ 10 | 5 ～ 8 | 4 ～ 8 |
| Nose Surface Treatment | None | None / Nickel Plating | None | None | None | None | Nickel Plating | None / Nickel Plating | None | None / Nickel Plating | None | Nickel Plating | None / Nickel Plating | None | None | None | None | None | None | None | None | None | None | None |
| Nose Heat Treatment | None | None / Hardened | None | Hardened | None | None | None | None / Hardened | Hardened | None / Hardened | None | None | None / Hardened | Hardened | None | None | None | None | None | None | None | None | None | None |
| Nose O.D. d(Ø) | 4 ～ 8 | 5 ～ 10 | 6 ～ 10 | 8 ～ 10 | 5 ～ 10 | 6 ～ 10 | 4 ～ 7 | 6 ～ 8 | 6 ～ 8 | 4 ～ 12 | 4 ～ 8 | 6 ～ 8 | 5 ～ 10 | 4 ～ 10 | 6 ～ 8 | 4 ～ 8 | 4 ～ 8 | 5 ～ 10 | 4 ～ 8 | 5 ～ 8 | 8 | 5 ～ 10 | 5 ～ 8 | 4 ～ 8 |
| Length L(mm) | 30.5 ～ 71 | 33 ～ 80 | 59 | 71 ～ 75 | 46 ～ 84 | 65 ～ 92 | 26.5 ～ 34 | 45 ～ 54 | 37 ～ 54 | 32 ～ 82 | 30.5 ～ 71 | 44.5 ～ 52 | 33 ～ 80 | 43 ～ 83 | 37 ～ 54 | 34.5 ～ 71 | 30.5 ～ 59 | 45 ～ 80 | 39 ～ 71 | 45 ～ 69 | 54 | 33 ～ 63 | 33 ～ 54 | 39 ～ 71 |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Locking Mechanism
-
Mounting Method
- Screw-In
- Press Fit
- Bolt Mounting
- Others
- Flange
-
Overall Length
- Standard
- Short
-
Body Material
- Steel
- Stainless Steel
- Zinc Die Cast
- Others
-
All Stainless
- Applicable
- Not Compliant
-
Nose Material
- Steel
- Stainless Steel
-
Metric / Inch
- metric
-
Body O.D./Thread M(mm)
-
Stroke S(mm)
-
Nose Surface Treatment
-
Nose Heat Treatment
-
Nose O.D. d(Ø)
-
Length L(mm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
- 14 Days or Less
- 16 Days or Less
- 17 Days or Less
- 26 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy