(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Totaku Industries Plastic Hoses
| Days to Ship |
|
|---|
-
Totaku Industries
A PVC-free hose that utilizes an olefin elastomer for use in food applications . A reinforcing cord gives the hose an allowable pressure resistance performance tolerance of 0.5 MPa.
[Features]
· Usable for food applications.
· This hose is not suitable for handling foods or liquids containing oils.
· Compliant with the Ministry of Health, Labour and Welfare Notification No. 201 Food Sanitation Act (however, the heptane dissolution test items for oils, fats, and fatty food are excluded).
· Please perform hot water washing at temperature: ≤ 80°C, pressure: ≤ 0.1 MPa, and pressurization time within 3 minutes.
· The hose can be cleaned hygienically using 95% ethanol.
· The hose may be incinerated after use without generating harmful hydrogen chloride gas, sulfur oxides, nitrogen oxides, hydrogen cyanide, or ammonia (ash content: ≤ 0.1%).
· The hose is semi-transparent, which enables checking of the material being transported.
· The hose is flexible for enhanced workability.
· A reinforcing cord has been included to allow the hose to withstand a maximum allowable pressure of 0.5 MPa (5.1 kgf/cm2).
· The hose is lightweight and floats in water.Days to Ship: 12 Days or more -
Totaku Industries
Excellent pressure resistance, with a pressure tolerance of 1.00 MPA. The structure does not stretch when compressed. Uses abrasion-resistant rubber for the inner layer, offering excellent abrasion resistance. Stands up to external pressure and deforms little.
Days to Ship: 13 Days or more -
Totaku Industries
Inner and outer diameter flat types for non-PVC hoses. It has excellent heat resistance and flexibility, enabling its use for food-related applications. Semi-transparent design enables checking of material being transported.
[Features]
· Can be used for food applications.* Not suited for transporting food or fluids that contain oil.
· Compliant to Health, Labor and Welfare Ministry Notification No. 201 Food Sanitation Laws (the item of the dissolution test (heptane) for oil and fat and fatty food has been excluded).
It has achieved excellent heat resistance and flexibility.
As it can use hot water cleaning and can be washed in 95 percent ethanol, it is very hygienic. (Perform hot water cleaning at temperatures of 80°C with pressure of 0.1 Mpa or less, and a pressurization time of within 3 minutes).
· It is lightweight with high abrasion resistance. Both inside and outside surfaces are smooth. Semi-transparent design enables checking of material being transported.Days to Ship: 14 Days or more -
Totaku Industries
Hose for powder transport using special anti-static electricity combined elastomers. The interior surface has good sliding characteristics and exhibits high transportability. In addition, it is lightweight and flexible. with excellent abrasion resistance.
[Features]
· Can be used for food applications.* Not suited for transporting food or fluids that contain oil.
· Compliant to Health, Labor and Welfare Ministry Notification No. 201 Food Sanitation Laws (the item of the dissolution test (heptane) for oil and fat and fatty food has been excluded).
・The interior surface has good sliding characteristics and exhibits high transportability.
▪Provides excellent anti-static electricity benefits.
・It is lightweight and flexible with excellent abrasion resistance characteristics.
・This is semi-transparent enabling confirmation of the transported materials.Days to Ship: 12 Days or more -
TAC Eco Line Heat Resistance and Oil Resistance
Totaku Industries
In addition to general food transport, this is non-PVC hose is suited to the transport of oils and oily foods. Semi-transparent design enables checking of material being transported. A reinforcing cord confers an allowed pressure tolerance of 0.5 MPA.
[Features]
・This can be used for the transport of fat and fatty foods, as well as general foods.
・This is compatible with the Health, Labor and Welfare Ministry Notification No.201 Food Sanitation Laws. (compliant with all items included as Heptane items)
・This is hygienic and capable of hot water cleaning ※1, 95% ethanol cleaning.
・After using the hose, no harmful gases※2 that are flammable are produced (incineration ash of 0.1% or less).
・This is semi-transparent, which enables confirmation of the transported materials.
▪ This includes a reinforcing cord and has a maximum pressure tolerance of 0.5 MPA (5.1 kgf/f).
・This is lightweight and floats on water.Days to Ship: 12 Days or more -
Totaku Industries
A food hose that does not use phthalate plasticizers and is completely compliant with Ministry of Health, Labour and Welfare Bulletins No. 267 and 201. Transportation of oils other than food is also possible.
[Features]
· Tasteless and odorless, and thus suitable for food transportation.
· Uses non-phthalate plasticizers and is thus compliant with Ministry of Health, Labour and Welfare Bulletin No. 267 issued on August 1, 2003 (sale or use in violation of this provision is punishable by up to 6 months in prison or a fine of up to 300, 000 yen).
· Can be used for oils and fats and fatty foods (completely compliant with Ministry of Health, Labour and Welfare Bulletin No. 201).Days to Ship: 12 Days or more -
Totaku Industries
A hose lighter and more flexible than the TAC SD-C Food model. Its inner surface is slicker and provides better anti-static prevention. Use to transport food in powder or grain form, as well as steamed rice or food containers.
Days to Ship: 13 Days or more -
Totaku Industries
TAC SD-C food heat-resistance specification. This includes excellent heat resistance. (Upper limit of 80°C on use). · Food hose, fully conforming to Ministry of Health, Labor, and Welfare (MHLW) Notification No. 267 and 201.
[Features]
・This is a TAC SD-C food heat resistant specification.
・Boasts excellent heat resistance. (Upper temperature limit of 80℃ in use)
・This uses non-phthalate plasticizers and conforms to the Ministry of Health, Labor and Welfare Bulletin No. 267 enacted from August 1st 2003. (Those using or selling in violation of this provision shall be subject to a prison term of six months or less or a fine or 300, 000 yen. )
This can be used for fatty and oily foods (fully compatible with the Ministry of Health, Labor and Welfare Bulletin No. 201).Days to Ship: 12 Days or more -
Totaku Industries
SD hose pressure-resistant type. This has a reinforcing cord, and has a maximum allowed pressure of 0.5 MPA.
[Features]
・SD hose pressure-resistant type.
▪ With a reinforced cord, it has a pressure-resistant function with a maximum allowable pressure of 0.50 Mpa {5.1 kgf/f}.Days to Ship: 13 Days or more -
Totaku Industries
TAC SD-A lightweight type. A hose with improved flexibility.
[Features]
· A TACSD-A lightweight type.
· Flexibility is improved due to the TACSD-ADays to Ship: 12 Days or more -
Totaku Industries
[Features]
· Inner and outer surfaces are smooth.
· Has better pressure resistance than the TAC SD-A.
· Because the soft portion is transparent, it is possible to check the contents that are being transported.Days to Ship: 12 Days or more -
Totaku Industries
TAC SD-C lightweight type.
[Features]
· Lightweight version of the TAC SD-C.
· Suitable for both suction and delivery-4, but the product is particularly well-suited for delivery.
· For supplying or draining water for agriculture, industry, and civil engineering constructionDays to Ship: 12 Days or more -
Totaku Industries
[Features]
· Grounding wire (copper) included, with excellent antistatic effect.
Transparency enables checks of transported items.Days to Ship: 13 Days or more -
Totaku Industries
[Features]
· Sustained anti-static effect due to the use of special blended soft resin.
· Transparency (clear green color) makes it easy to observe what is passing through the tube.Days to Ship: 12 Days or more -
Totaku Industries
An oil-resistant hose for all resin types. Design incorporates special oil-resistant compounded resin for transporting oils.
Days to Ship: 12 Days or more -
Totaku Industries
Uses abrasion resistant rubber for three times the abrasion resistance of TAC SD-A. Conductive for anti-static effects.
Days to Ship: 13 Days or more -
Totaku Industries
[Features]
∙ Heat resistant specifications to resist 100℃ hot air (straight pipes that are designed to withstand 120℃ hot air).
∙ In addition to the conductive rubber, we use steel wire for grounding, which considerably improves safety.
∙ Compared to TAC helang, ozone degradation is less likely to happen to this hose.
∙ Product has superior weather resistance propertiesDays to Ship: 12 Days or more -
Totaku Industries
The abrasion resistance performance is approximately 4 times that of TAC HERAN-N. A superior antistatic effect is achieved by the introduction a ground wire. Liquids are transported smoothly due to the extremely smooth inner surface. The transparent duct enables checking of the material being transported.
[Features]
· This product has 4 times the abrasion resistance of TAC HERAN-N (based on for initial value of 1 for TAC HERAN-N in the abrasion amount comparison test—eight hours after starting).
· The duct hose is transparent, which enables visually checking inside the duct.
· Superior anti-static effect due to the inclusion of a ground wire.
· Liquids are transported smoothly due to the extremely smooth inner surface.Days to Ship: 12 Days or more -
Totaku Industries
A lightweight, flexible, and wear resistant hose. The wear resistance performance is 4 times that of TAC Heran New Heat Resistant. Offers excellent durability due to the reinforcing thread, allowing use in locations with different heights where tensile loads are applied.
[Features]
· Has 4 times the wear resistance of TAC Heran New Heat Resistant (assuming the initial wear (8 hours after test start) of TAC Heran New Heat Resistant is 1, in the abrasion loss comparison).
· The product is transparent which makes it easy to check fluids and to find locations where fluids are clogged.
· Lightweight and flexible.
· Offers a pressure resistance performance that can withstand up to a maximum allowable pressure of 0.5Mpa (5.1kgf/f).
· Offers excellent durability due to reinforcing thread, allowing use possible in locations with different heights where tensile loads are applied to the hose.
· Offers a superior anti-static effect by means of a ground wire.Days to Ship: 47 Days or more -
Totaku Industries
An all-resin pressure resistant hose. The protective rigid PVC outer layer protects against abrasion and keeps the reinforcing threads from coming loose.
Days to Ship: 13 Days or more -
Totaku Industries
A hose for sanitation vehicles. The design emphasizes abrasion resistance on the external surface and provides good durability.
Days to Ship: 13 Days or more -
Totaku Industries
Hose for sanitation vehicles. Lightweight TAC clean W.
[Features]
· Lightweight TAC clean WDays to Ship: 13 Days or more -
Totaku Industries
[Features]
· Hose for sanitation vehicles.
· All season type, which is broadly compatible with temperature changes in the work environment.
· Usable in cold climates, offering excellent cold resistance.
· The operating temperature range is -20°C to 50°C.Days to Ship: 13 Days or more -
Totaku Industries
A hose for sanitation vehicles. Discharge-specific design allows for smooth on-site operation.
Days to Ship: 13 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Applicable Fluid |
| Mounting Metal Pieces(Fittings etc.,) |
| Hose Material |
| Color |
| O.D. D(Ø) |
| Nominal I.D. d(φ) |
| Properties |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries | Totaku Industries |
| Product Series | ||||||||||||||||||||||||
| Days to Ship | 12 Days or more | 13 Days or more | 14 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 13 Days or more | 12 Days or more | 13 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 13 Days or more | 12 Days or more | 12 Days or more | 13 Days or more | 12 Days or more | 12 Days or more | 47 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more |
| Applicable Fluid | Water / Powder / Food | Water / Powder / Cement / Grains | Water / Food | Water / Chemical / Powder / Food | Water / Powder / Food / Oil (Mineral Oil) | Water / Food / Oil (Mineral Oil) | Powder / Food | Water / Food | Water | Water | Water | Water | Powder | Powder | Oil (Mineral Oil) | Water / Powder / Food / Cement / Grains | Water / Powder / Food / Cement / Grains | Powder / Cement / Grains | Powder / Grains | Water | Water | Water | Water | Water |
| Mounting Metal Pieces(Fittings etc.,) | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Hose Material | Elastomer | Others | Elastomer | Elastomer | Elastomer | Vinyl Chloride | Vinyl Chloride | Vinyl Chloride | Others | Others | Others | Others | Others | Others | Others | Others | Ethylene Propylene Rubber | Polyurethane | Polyurethane | Vinyl Chloride | Others | Others | Others | Others |
| Color | Transparent (including non-white colors) | Orange | Transparent (including non-white colors) | Transparent (including non-white colors) | Transparent (including non-white colors) | White | Green | Translucent White | Orange | Transparent (including non-white colors) | Gray | White | Transparent (including non-white colors) | Transparent (including non-white colors) | Black | Black | Black | Transparent (including non-white colors) | Transparent (including non-white colors) | Gray | Green | Blue | Black | Black |
| O.D. D(Ø) | 36.7 ～ 95.5 | 69.5 ～ 247.5 | 46 ～ 60.6 | 47.5 ～ 120 | 37.4 ～ 51 | 31.2 ～ 115.8 | 115 ～ 172 | 31.2 ～ 88 | 34.9 ～ 347 | 30.8 ～ 141.6 | 24.2 ～ 115.8 | 30.6 ～ 221.2 | 33.7 ～ 226.5 | 30.8 ～ 172 | 31.2 ～ 115.8 | 47 ～ 172 | 47.8 ～ 173 | 48.5 ～ 226.4 | 121.8 | 45 ～ 65 | 61.4 ～ 76 | 57.5 | 56.5 | 78.5 ～ 92.8 |
| Nominal I.D. d(φ) | 25 ～ 75 | 50 ～ 200 | 38 ～ 50 | 38 ～ 100 | 25 ～ 38 | 25 ～ 100 | 100 ～ 150 | 25 ～ 75 | 25 ～ 300 | 25 ～ 125 | 19 ～ 100 | 25 ～ 200 | 25 ～ 200 | 25 ～ 150 | 25 ～ 100 | 38 ～ 150 | 38 ～ 150 | 38 ～ 200 | 100 | 32 ～ 50 | 50 ～ 65 | 48 | 48 | 65 ～ 75 |
| Properties | Pressure Resistance / Transparency / Flexibility | Abrasion Resistance / Pressure Resistance / Shape Retention | Abrasion Resistance / Heat Resistance / Transparency / Flexibility | Antistatic Performance / Abrasion Resistance / Transparency / Flexibility | Pressure Resistance / Heat Resistance / Oil Resistance / Transparency | Oil Resistance / Low Odor / Vacuum | Antistatic Performance / Non-adhesive / Flexibility | Heat Resistance / Vacuum | Pressure Resistance / Vacuum | Transparency / Flexibility / Vacuum | Pressure Resistance / Transparency / Vacuum | Pressure Resistance / Transparency / Vacuum | Antistatic Performance / Transparency / Vacuum | Antistatic Performance / Transparency | Oil Resistance / Vacuum | Antistatic Performance / Abrasion Resistance / Vacuum | Abrasion Resistance / Weather Resistance / Heat Resistance / Vacuum | Antistatic Performance / Abrasion Resistance / Transparency | Antistatic Performance / Abrasion Resistance / Transparency | Abrasion Resistance / Pressure Resistance | Abrasion Resistance / Other Properties | Other Properties | Low Temp. Resistance / Other Properties | Other Properties |
Loading...
Configure
Specification/Dimensions
-
Applicable Fluid
-
Mounting Metal Pieces(Fittings etc.,)
-
Hose Material
- Polypropylene
- Polyurethane
- Vinyl Chloride
- Silicon Rubber
- Fluororesin
- Olefinic Resin
- Polyolefinic Resin + Styrene Resin
- Others
- Elastomer
- Special Rubber
- Ethylene Propylene Rubber
- Nylon
-
Color
- White
- Translucent White
- Transparent (including non-white colors)
- Red
- Blue
- Green
- Rose
- Black
- Gray
- Orange
- Yellow
- Pink
- Brown
- 2-Color
-
Metric / Inch
-
O.D. D(Ø)
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 10.5
- 10.6
- 11
- 11.7
- 11.7/11.7
- 12
- 12.3
- 12.5
- 13
- 13.5
- 14
- 14.3
- 14.5
- 14.5/16.0
- 15
- 16
- 16.5
- 17
- 18
- 19
- 19.5
- 20
- 20.1
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 24
- 24.1
- 24.2
- 24.4
- 24.5
- 25
- 25.6
- 26
- 27
- 27.5
- 28
- 28.2
- 28.5
- 29
- 29.9
- 30
- 30.4
- 30.6
- 30.8
- 30.9
- 31
- 31.2
- 31.4
- 31.5
- 31.6
- 31.8
- 32
- 32.6
- 32.9
- 33
- 33.4
- 33.5
- 33.7
- 33.8
- 34
- 34.2
- 34.4
- 34.5
- 34.9
- 35.5
- 35.6
- 36
- 36.5
- 36.7
- 37
- 37.4
- 37.5
- 37.6
- 37.8
- 38
- 38.2
- 39
- 39.2
- 39.3
- 39.8
- 40
- 40.2
- 40.5
- 40.7
- 40.8
- 41
- 41.5
- 41.6
- 41.8
- 42
- 42.5
- 43
- 43.2
- 43.5
- 43.8
- 43.9
- 44
- 44.4
- 44.6
- 45
- 45.4
- 45.5
- 45.8
- 46
- 46.2
- 46.4
- 46.5
- 46.6
- 47.0
- 47.2
- 47.5
- 47.6
- 47.8
- 48
- 48.4
- 48.5
- 48.6
- 48.7
- 48.8
- 49.5
- 50
- 50.1
- 50.5
- 50.7
- 51
- 52
- 52.3
- 53
- 53.5
- 54.5
- 55
- 56
- 56.5
- 57.0
- 57.5
- 58
- 58.2
- 58.4
- 58.5
- 58.6
- 59.2
- 59.7
- 59.8
- 60
- 60.2
- 60.5
- 60.6
- 60.8
- 60.9
- 61
- 61.4
- 61.6
- 61.8
- 62
- 62.4
- 62.5
- 62.6
- 62.8
- 63
- 63.4
- 63.5
- 64.5
- 65
- 65.2
- 66.0
- 66.8
- 67.0
- 67.4
- 68
- 69.5
- 69.7
- 71.0
- 71.5
- 72
- 72.1
- 72.2
- 72.4
- 72.5
- 72.6
- 73
- 73.2
- 73.6
- 73.9
- 74
- 74.1
- 74.8
- 75
- 75.1
- 75.9
- 76.0
- 76.3
- 76.5
- 76.8
- 77
- 78.5
- 78.9
- 80
- 80.5
- 81.1
- 81.5
- 81.8
- 84
- 84.8
- 85.1
- 85.5
- 86
- 86.3
- 86.6
- 87.0
- 87.5
- 87.6
- 88.0
- 88.8
- 89
- 89.6
- 89.8
- 90
- 90.2
- 90.8
- 91
- 91.4
- 92
- 92.8
- 93.3
- 95.5
- 96.0
- 97
- 99.1
- 99.5
- 99.7
- 100.5
- 101
- 102.0
- 102.8
- 104
- 104.2
- 104.3
- 104.5
- 105
- 105.2
- 107
- 108
- 109
- 111.6
- 112.0
- 112.3
- 112.6
- 113
- 113.2
- 114
- 115
- 115.2
- 115.8
- 117
- 117.2
- 117.6
- 118
- 118.4
- 118.6
- 119
- 119.5
- 120
- 120.5
- 121
- 121.8
- 128
- 129
- 130.2
- 137.9
- 139
- 139.5
- 140
- 140.6
- 141.6
- 143
- 144.8
- 145.7
- 146
- 146.8
- 148
- 152
- 152.2
- 152.5
- 156.1
- 157.6
- 159.5
- 166.0
- 167.5
- 168.0
- 169.4
- 169.8
- 171.0
- 172.0
- 173
- 173.6
- 174.2
- 174.7
- 180.0
- 180.5
- 182
- 183.5
- 185.8
- 187
- 187.3
- 187.5
- 197.8
- 214.9
- 221.2
- 221.5
- 223.4
- 223.8
- 226.4
- 226.5
- 229.7
- 230
- 237
- 238.0
- 243.6
- 245
- 247.5
- 265.8
- 274
- 286.0
- 295.0
- 303.0
- 316.8
- 328.5
- 347.0
- 353.0
-
Nominal I.D. d(φ)
-
Properties
- Standard
- Antistatic Performance
- Abrasion Resistance
- Weather Resistance
- Pressure Resistance
- Heat Resistance
- Low Temp. Resistance
- Oil Resistance
- Chemical Resistance
- Low Release
- Non-adhesive
- Transparency
- Flexibility
- Low Odor
- Condensation Prevention
- Shape Retention
- High Strength
- Vacuum
- Bending Property
- Other Properties
Narrow search by specifying Manufacturer
-
- MISUMI (9)
- Kuraray Plastics (29)
- Togawa Sangyo (27)
- Toyox (25)
- Totaku Industries (24)
- Kanaflex (11)
- Plas-Tech (11)
- Tigers Polymer (10)
- Chiyoda (6)
- Toyo Tire & Rubber (4)
- HAKKO (1)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy