Takachi Electronics Enclosure Electrical Enclosure Interior Parts

• 

  Mounting Base - BMP Series, Steel

  Takachi Electronics Enclosure

  Mounting base (plastic, wood, iron) (BMP)
  
  [Features]
  · Steel mounting base.
  · Strength enables machining to be performed easily.
  · Mounting base made from inexpensive ABS plastic.
  · BMP0811P through BMP1616P have a flat structure, while BMP0825P, BMP1423P, and BMP1520P through BMP2020P have a reinforcement rib on the back surface of their mounting bases.
  · There are no models that correspond to BCAS050604, 050605, 060905, 071005, 080806, 101807, or 102307.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  HU Type Coin Battery Holder【1-50 Pieces Per Package】

  Takachi Electronics Enclosure

  [Features]
  · This series of coin battery holders offers a total of 7 different sizes covering LR44 as well as CR1220 to CR2450.
  · The terminals have a baseboard mounting pin structure.
  · Because the holder has a compact design, a space-saving baseboard can be used.
  · The product is made of LCP resin containing glass which features a high heat resistance temperature.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  BH type battery holder with lead wire

  Takachi Electronics Enclosure

  BH type battery holder with lead wire

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  CST-type CR2032 coin battery terminal【10 Pieces Per Package】

  Takachi Electronics Enclosure

  [Features]
  ・CR2032 coin battery terminal.
  ・The negative terminal side has “CR2032” and “－（minus）” engraved on it.
  · Already included in the CS and CSS series. Use in cases of loss or damage.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Coin Battery Holder, BCR Series【1-100 Pieces Per Package】

  Takachi Electronics Enclosure

  Coin battery holder (for CR2032) (BCR)
  
  [Features]
  · Structure makes it difficult to insert batteries the wrong way.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  Lithium Battery Holder CR2 Series

  Takachi Electronics Enclosure

  Lithium battery holder (CR-2)
  
  [Features]
  · Operating temperature range: -10℃ to 60℃

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Terminal Cover, NTC Series

  Takachi Electronics Enclosure

  Terminal Cover (NTC)
  
  [Features]
  - Terminal cover with knockout holes for wiring.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  Terminal Cover, NTK Series

  Takachi Electronics Enclosure

  Terminal Cover (NTK)
  
  [Features]
  · Dedicated terminal cover with holes bored into it for wiring.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Button Battery Holder, PD23 Series【1-100 Pieces Per Package】

  Takachi Electronics Enclosure

  Button battery holder (PD23)
  
  [Features]
  · Operating temperature range: -40℃ to 80℃

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  Flame Retardant Battery Pushing Sponge, SCM Series【10 Pieces Per Package】

  Takachi Electronics Enclosure

  Flame Retardant Battery Pushing Sponge (SCM)
  
  [Features]
  - Flame retardant sponge with single-sided adhesive tape.
  - Use to prevent vibration of batteries or after inserting 006P batteries and battery holders inside plastic cases.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Lead-free Universal Circuit Board, TNF Series

  Takachi Electronics Enclosure

  Lead-free Universal Circuit Board (TNF)
  
  [Features]
  · Universal circuit board with a 2.54 mm pitch.
  · Circuit board sized just right for the SW, SS, SY, TW, TWN, and PW Series of cases.
  · We took environmental measures into consideration and used lead-free solder.
  · Because the TNF160-240 is a general purpose universal circuit board, please cut it before use.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Circuit Board Pushing Sponge, UR Series【10 Pieces Per Package】

  Takachi Electronics Enclosure

  Circuit Board Pushing Sponge (UR)
  
  [Features]
  · When anchoring the circuit board to the case, you can pinch it with the sponge surface or anchor it with the surface of adhesive tape.
  · Also, it can be adapted for use in a wide variety of applications.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Coin Battery Holder　CH7410 Series

  Takachi Electronics Enclosure

  Coin Battery Holder　(CH7410)
  
  [Features]
  · Made from PPS plastic for high temperature heat resistance, and can be mounted with reflow soldering.
  · Terminal part has gold plate finishing on phosphor bronze.
  · Batteries may be dislocated due to falls or violent impact.
  · We do not recommend using it for equipment that may be subject to falls.
  · Operating temperature range: -55℃ to 85℃.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  Installed battery box with an LDN-type lead wire.

  Takachi Electronics Enclosure

  [Features]
  · A battery box that can be installed in one step.
  · The tab part is stepped and so is compatible with plate thicknesses of t1.0 to t3.0.
  · Secure attachment with screws is possible because there are two M3 countersink holes for screws on the left and right of the main unit.
  · Lead-free solder has been applied to the lead wire (UL standard product length = 140 mm) for lead-free compatibility.
  ▪ The structure includes the battery terminal symbols ⊕ and ⊖ to prevent reverse insertion.
  · The external dimensions of the alkaline battery/manganese battery may differ slightly depending on the manufacturer.
  · In addition, the battery box has a small size tolerance. Therefore, please use a battery retainer sponge (SCM Series) to hold the battery in position.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Battery Installation Box, LD-Type

  Takachi Electronics Enclosure

  [Features]
  - One-touch installation.
  - The stepped tab is compatible with plate thicknesses from t1.0 to t3.0.
  - Screw-attachable; two M3 countersink holes for screws available on the left and right of the unit.
  - ⊕ and ⊖ battery terminal symbols provided to prevent reverse insertion.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Externally-mounted Battery Box, MD Series

  Takachi Electronics Enclosure

  Externally-Mounted Battery Box (MD)
  
  [Features]
  - Operating temperature range: -10℃ to 60℃.
  - Externally mounted battery box with a wide range of applications.
  - One-touch cover opening for easy battery replacement.
  - Full grain finish with R attached, making it optimal as a mobile battery box.
  - The dimensions of alkaline/manganese dry cells differ by manufacturer.
  - Some extra room is provided for using a battery-pushing sponge (SCM series).
  - Flame retardant ABS (UL94V-0).
  - MD-006P incorporates a AAA holder and can also be used as a dedicated holder.
  - ⊕ and ⊖ battery terminal symbols included to prevent reverse insertion.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  SN, BH, MP Type Battery Holder with Lead Wire

  Takachi Electronics Enclosure

  Battery holder with lead wire for D, C, AA, AAA and N batteries

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Coin Battery Holder, BK-Type【10 Pieces Per Package】

  Takachi Electronics Enclosure

  The BK-5067, which is compatible with the thin-type CR2016 battery, has been added to the lineup of metal coin battery holders. In addition, the BK-2032M negative contact terminal which accepts the CR2032 coin battery has been included.
  
  [Features]
  · A simple metal coin battery holder for minimal, limited installation space.
  · When used in mass production, a carrier taping package (TR type) that can support automated mounting machines provides added convenience.
  · The negative terminal battery contact can be installed onto a pad on top of a mainboard. Please use the BK-2032 negative terminal (for BK-888 only).

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Coin Battery Holder, CH Series

  Takachi Electronics Enclosure

  [Features]
  · Coin battery holder (CH74)

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Lithium Battery Holder CR123A Series

  Takachi Electronics Enclosure

  [Features]
  · Lithium battery holder (CR123A)

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  IT type battery terminal【10 Pieces Per Package】

  Takachi Electronics Enclosure

  [Features]
  ・We have added D and C sizes of the IT-1 and IT-2 series to the battery terminal series.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  LCSC Series Silicone Cover

  Takachi Electronics Enclosure

  Silicone cover for the LC series.
  [Features]
  · Choose from 7 colors: red, yellow, green, blue, navy blue, dark gray and light gray.
  · Made from silicone rubber.
  [Applications]
  · Can be used as an interior part to protect from impact or penetration of foreign matter from outside.
  

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  Coin Battery Holder SMTM Series【10-700 Pieces Per Package】

  Takachi Electronics Enclosure

  [Features]
  · A simple coin battery holder made of metal.
  · New type for CR1632 has been added.
  · A carrier taping package (TR type) that can support automated mounting machines is convenient for use in mass production.
  · For battery contacts of negative polarity, please install a pad on the circuit board, or use negative terminal “BK-2032M” (for SMTM2032 only).

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  SMTU-Type Coin / Button Cell Holder【1-750 Pieces Per Package】

  Takachi Electronics Enclosure

  Coin battery holder with 8 sizes to choose from, including LR44 and CR1220 to CR2450.
  [Features]
  · Structure in which the terminal is mounted to the surface (SMT).
  · When used in mass production, carrier taping wrapping (TR type) that is compatible with an automatic mounting machine is convenient.
  · Gold-plated specification (SMTU1220-G, SMTU2032-1-G).
  [Applications]
  · Made from high heat-resistant LCP resin containing glass. Compatible with lead-free solder reflow.
  · Compact design so it is possible to conserve circuit board space.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Battery Holder with Lead Wire / Pin / Snap Terminal【1-50 Pieces Per Package】

  Takachi Electronics Enclosure

  [Features]
  This is a battery holder with an included lead wire pin snap terminal (SN).

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Strap, STP Series

  Takachi Electronics Enclosure

  Strap (STP)
  
  [Features]
  · Strap equipped with a hook made of metal.
  · Neck strap type includes removable parts and parts with adjustable length.
  · Tu be used as a set with the CR key ring.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Battery Holder, BH-9V Series

  Takachi Electronics Enclosure

  006P Battery holder (BH-9V)
  
  [Features]
  · Lead free-compliant

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Corner Cap for FC【4 Pieces Per Package】

  Takachi Electronics Enclosure

  Corner Cap for FC (FC-BK)
  
  [Features]
  · FC-BK-S is for use with the C4 Series.
  · For other mechanisms, use FC-BK- .

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  Small Button Battery Holder, PB621 Series【10 Pieces Per Package】

  Takachi Electronics Enclosure

  Small Button Battery Holder (PB621)
  
  [Features]
  - Remove batteries as shown in the following diagram using pins, negative precision screwdrivers, or the like.
  - Using excessive force when removing by hand may damage the holder.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  PS Series Portable Plastic Case

  Takachi Electronics Enclosure

  A plastic case with a top and bottom cover construction that fits together without needing screws.
  [Features]
  · Small, rounded case that fits in the hand easily.
  5 types of color specifications: white, black, cobalt blue, green and pink.
  Suitable for small devices such as wireless devices or remote controls.
  Has a hole for mounting the optional strap.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  BV-50N type coin battery holder【50 Pieces Per Package】

  Takachi Electronics Enclosure

  [Features]
  · Vertical battery holder for CR2450.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  Battery Holder with MP-PC Type Pin

  Takachi Electronics Enclosure

  [Features]
  · Battery holder with an MP-PC type pin and a base mounting pin that uses hard copper wire.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  MP Series/Battery Snap【10 Pieces Per Package】

  Takachi Electronics Enclosure

  [Features]
  Crimp terminal caulked structure. The lead wire is UL1007, AWG26, and is 150 mm long.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  CL Type Aluminum Angle

  Takachi Electronics Enclosure

  [Features]
  · CL type aluminum angle

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  CSPB Type CS / CSS Series Board

  Takachi Electronics Enclosure

  [Features]
  · This is a dedicated board which can be used with the CSCSS series.
  · Can be used for prototyping or producing small lots.
  · This board is made of glass epoxy (FR-4) and features double-sided through holes and a pitch of 2.54 mm.
  · The CSCSS series provides holes for insertion of included battery terminals.
  · Silk printing is also included to ensure that the terminals are set in the correct direction.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  CSSC Type Silicon Cover

  Takachi Electronics Enclosure

  [Features]
  This is a silicon cover for use with the CS series. Two types featuring either an upper surface opening or excluding an upper surface opening as well as six different colors are available. Can be produced in 1 of 1000 colors specified by the customer, with no additional cost compared to standard models.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  LCTP Series Shock Resistant Silicone Cover

  Takachi Electronics Enclosure

  Silicone cover for the LC series with a shock-resistant design.
  [Features]
  · 5 colors available: orange, green, navy blue, dark gray and light gray.
  · Made from silicone rubber.
  [Applications]
  · Can be used as an interior part to protect from impact or penetration of foreign matter from outside.
  

  • Volume Discount

  Days to Ship:	9 Days or more

• 

  Model HCS Hexagonal Head Bolt【8 Pieces Per Package】

  Takachi Electronics Enclosure

  [Features]
  - Hexagonal bolt for use with the AW series.
  - Use when you want a sturdy exterior or to prevent tampering.
  *Phillips head screws included standard.

  • Volume Discount

  Days to Ship:	9 Days or more

Loading...