(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Hardened Square JIS 1 with Base (JIS B7526 Compliant Product)
OBISHIKEIKI
[Features]
· This is a quenched product with an accuracy of JIS standard Grade 1.
· To be used for measuring right angles of jig tools, right angles by mounting jig tools, or right angles of products.
· The short piece is thick, allowing measurement in stable conditions.
· The long side and the short side are bonded together rigidly by a special method.
Days to Ship: | 10 Days or more |
---|
I-Shaped, Right-Angle Ruler, Class 1 Hardened, JIS B7526 Standard Product
OBISHIKEIKI
[Features]
· The accuracy is JIS standard Grade 1.
· Maintains high precision as the highest grade set square in accordance with JIS standards.
· Thick, so stable measurements can be taken even in an upright position.
· To be used for measuring right angles of jig tools, right angles by mounting jig tools, or right angles of products.
· Maintains fully sufficient accuracy as a master scale for precision machinery and measuring devices.
· All sizes are quenched articles.
· Special dimension and accuracy products are available upon order
Days to Ship: | 12 Days or more |
---|
Square with Base, No Hardening
RIKENKEISOKUKI
Can be used for on-site assembly. Quenching processing has not been applied. Comes with a stable base.
Days to Ship: | 10 Days or more |
---|
RIKENKEISOKUKI
Can be used for on-site assembly. Quenching processing has not been applied.
Days to Ship: | 8 Days or more |
---|
RIKENKEISOKUKI
Usable for the precise measurement of squareness. The usage surface has been quenched. Base enables stable measurements to be obtained.
Days to Ship: | 14 Days or more |
---|
RIKENKEISOKUKI
Usable for the precise measurement of squareness. The usage surface has been quenched.
Days to Ship: | 14 Days or more |
---|
RIKENKEISOKUKI
Can be used for flatness measurement and precise scribing work. Accuracy is only guaranteed on one face (faces A-B). Both quenched and non-quenched products are available.
Days to Ship: | 14 Days or more |
---|
RIKENKEISOKUKI
[Features]
· Can be used for flatness measurement and precise scribing work.
· An extremely handy type in which the usage surface has been machined into a bevel shape.
· Accuracy is only guaranteed on one face (faces A-B).
· Both quenched and non-quenched products are available.
Days to Ship: | 14 Days or more |
---|
I-Beam Straight Edge - Unhardened, RIBM Series
RIKENKEISOKUKI
[Features]
· A precision straight ruler which can be used for inspections of flatness, straightness, parallelism, etc.
· Quenched products are available (quenched hardness of 60 Hs or greater), as well as non-quenched products.
Days to Ship: | 14 Days or more |
---|
I-Type Straight Edge Class A Hardened
RIKENKEISOKUKI
Can be used when inspecting flatness, straightness and parallelism. The total length is the effective length + 40 mm. The hardness of the quenched usage surface is 60 Hs or greater.
Days to Ship: | 14 Days or more |
---|
Beam Type Straight Edge Class A
RIKENKEISOKUKI
[Features]
· A high precision straight edge which can be used for inspections of flatness, straightness, parallelism, etc.
· Use for installing precision apparatus, etc., as well, in conjunction with a precision level (30-50 mm level width).
· Quenched product (quenched hardness of 60 Hs or greater)
Days to Ship: | 14 Days or more |
---|
I-Beam Straight Edge - Hardened, RIBM Series
RIKENKEISOKUKI
[Features]
· A precision straight ruler which can be used for inspections of flatness, straightness, parallelism, etc.
· Quenched products are available (quenched hardness of 60 Hs or greater), as well as non-quenched products.
Days to Ship: | 14 Days or more |
---|
I-Shaped, Straightedge Ruler, Class A Hardened, JIS B7514 Standard Product
OBISHIKEIKI
[Features]
· An I-type product which has passed the JIS standards for straight rulers (JISB7514).
· It is ideal for inspecting flatness, straightness, parallelism, etc.
· The precision surface dimension (same as nominal dimension) excludes 20 mm from both ends.
· For products with the length of 1,500 mm or above, elongated handle holes are made for easy operation.
· All sizes are quenched products
Days to Ship: | 25 Days or more |
---|
Rectangular Hardened Straight Edge Class A JIS B7514 Compliant Product
OBISHIKEIKI
[Features]
· A rectangle product which has passed the JIS standards for straight rulers (JISB7514).
· It is ideal for inspecting flatness, straightness, parallelism, etc.
· The precision surface dimension (same as nominal dimension) excludes 20 mm from both ends.
· All sizes are quenched products
Days to Ship: | 25 Days or more |
---|
Set Square with Aluminum Stand, without Scale
SINWASOKUTEI
[Features]
· Set square suitable for woodwork.
· Various sizes between 20 cm and 1 m are available.
· Also useful when assembling a wooden model from the surface plate or measuring right angles.
· Long rod length is convenient for scribing many pieces of material at once.
· For inspection and scribing at right angles
Days to Ship: | 8 Days or more |
---|
Aluminum Sliding Bevel with Gradient Scale and Brace
SINWASOKUTEI
[Features]
· Useful for checking the angle for welding.
· The rod moves left and right, so symmetrical positioning is easy.
· Securely fixed with brace.
· Prevents changes in the angle while working.
· Made of aluminum and lightweight, making even work in high places easy.
· The rod is thick, and can be used as guide ruler for a circular saw.
· The angle scale is at a 1 degree pitch (20-120°), and the gradient scale is at a 1" pitch (flat gradient, steep gradient 0-10).
· Writing tape has been adhered to record the measured angle.
· Use for improving work efficiency by drawing angles using pen, pencil, etc. (pencil markings can be erased completely with an eraser)
Days to Ship: | 8 Days or more |
---|
SINWASOKUTEI
A set square for measuring rounded curves, diameters, and length.
[Features]
· The first of its kind, a 3 in 1 scale which can be used as an R gauge, diameter gauge, and bench rule.
· Compact size, allowing quick access and measurement.
[Applications]
· Ideal for measuring rounded curves, diameters, and length.
Days to Ship: | 8 Days or more |
---|
Steel Straight Edge (Flat Type / Quenched Product)
UNISEIKI
•Product Model: Straight Edge
•Angle (°): 180
•Finish Material: Special tool steel
•Specification: Quenched Product, Polished Finish
Days to Ship: | 9 Days or more |
---|
Straight Edge(I Beam Type / Hardened Component)
UNISEIKI
•Product Model: Straight Edge
•Angle (°): 180
•Finish Material: Special tool steel
•Specification: · Hardened article · Polished finish
Days to Ship: | 9 Days or more |
---|
ESCO
This is Esco's combination square.
Comes with a marking needle.
Application: For 45°/90°
Minimum graduation: 0.5 mm
Days to Ship: | 10 Days or more |
---|
Combination Square EA719AG-300
ESCO
[Product Specifications]
・With a scriber
・Scale-300mm
・Min scale-1mm
・With 180° protractor and level
・With a set of center head and protractor, for cylinder centering, parallel lines, getting an angle.
Days to Ship: | 9 Days or more |
---|
ESCO
[Features]
·For general work. Exact precision cannot be maintained
·The inner and outer angle measurement surfaces have a lapping finish, and the sides have a polished finish.
Days to Ship: | 9 Days or more |
---|
Flat-Type Square [2nd Class] EA719AK-14
ESCO
[Product Specifications]
・For general work. Strict accuracy cannot be retained.
・Perpendicularity-[±20 + L/10]μm
・Material-Mild steel
・Interior and exterior angle measurement surfaces are lapping fishing and the side surfaces are polishing finishing.
・Dim. (mm)…125 x 80
Days to Ship: | 9 Days or more |
---|
square/flat (1st grade/quenched)
ESCO
[Features]
·It is hardened and has a hardness of HS60° or more.
·Strict accuracy for general work cannot be maintained.
·The inner and outer angle measurement surfaces have a lapping finish, and the sides have a polished finish.
Days to Ship: | 10 Days or more |
---|
Square with Stand (Scale) EA719AM-5
ESCO
[Product Specifications]
・Measurement of perpendicularity of a product or part
・Material-Carbon steel
・With a scale having 1mm divisions on one side (equivalent to JIS 2nd grade)
・Dim. (mm)…300 x 200
・Perpendicularity (mm)…±0.05
Days to Ship: | 9 Days or more |
---|
ESCO
[Features]
·Measurement of squareness of products, parts, etc.
·1 mm through scale on one side (Equivalent to JIS grade 2)
Days to Ship: | 9 Days or more |
---|
ESCO
Esco's T-shaped square.
Ideal for scribing at right angles from the edge.
Days to Ship: | 9 Days or more |
---|
ESCO
[Product Specifications]
・45°, 90° angle check
・For marking a material when making 45°joint
・Material-Aluminum
・Dim.-169 x 63 x 73mm
Days to Ship: | 9 Days or more |
---|
[Stainless Steel] Stop-Type Square EA719JA-2
ESCO
[Product Specifications]
・Stop-type ruler, As complete square, 2-in-one
・For right and left ink marking, 45° marking can be done only by one side.
・Material-Stainless steel
・Dim.-170 x 100 x 1.5mm
・Bench dim.-163 x 15 x 5mm
・Angle accuracy-45°: ±0.2/100mm 90: ±0.1/100mm
Days to Ship: | 9 Days or more |
---|
ESCO
Esco square with aluminum stand.
For right angle inspection and marking.
Material Base: aluminum, rod: Stainless steel
Days to Ship: | 9 Days or more |
---|
300mm Combination Square EA719JC-300
ESCO
[Product Specifications]
・Min. scale-1mm/1/16
・For 45°, 90°
・With scriber hook
・Body: Zinc die-cast, Scale: Steel
・Scale…300mm
Days to Ship: | 8 Days or more |
---|
Aluminum Sliding Bevel with Brace
SINWASOKUTEI
[Features]
· Useful for checking the angle for welding.
· The rod moves left and right, so symmetrical positioning is easy.
· Securely fixed with brace. Prevents changes in the angle while working.
· Made of aluminum and lightweight, making even work in high places easy.
· The rod is thick, and can be used as guide ruler for a circular saw.
· The angle scale is at a 1 degree pitch (20-120°), and the gradient scale is at a 1" pitch (flat gradient, steep gradient 0-10).
· Easily tightened screws are adopted.
· Writing tape has been adhered to record the measured angle.
Use for improving work efficiency by drawing angles using pen, pencil, etc.
(Pencil markings can be erased completely with an eraser)
[Applications]
· For copying or scribing an arbitrary angle such as a roof inclination, etc.
· Measure gradients and use as a guide ruler for circular saws as is.
· With scale for length measurement.
Days to Ship: | 9 Days or more |
---|
SINWASOKUTEI
[Features]
· The rod has scale markings so it can also be used for measuring dimensions.
· As the base of the stand is large, it is easy to verify perpendicularity.
[Applications]
· For right angle inspection or scribing.
· For 45° scribing.
Days to Ship: | 9 Days or more |
---|
SINWASOKUTEI
[Features]
· Includes an angle/gradient scale. Very useful for setting and reading angles (gradients).
· Legs are removable, allowing use for lead frame leveling when attached, and as a tool for basic center marking (reference lines) or angle measuring tool with the legs removed. Further, since the legs expand and contract from 50 cm to 80 cm, it can also support a high base.
[Applications]
· For lead frame leveling or right-angle leveling in basic center marking (reference lines).
· For copying angles and gradients in lieu of a free angle ruler.
Days to Ship: | 12 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Product Model |
Beam Length(mm) |
Precision(mm) |
Angle(°) |
Stand Length(mm) |
Scale |
Brand | OBISHIKEIKI | OBISHIKEIKI | RIKENKEISOKUKI | RIKENKEISOKUKI | RIKENKEISOKUKI | RIKENKEISOKUKI | RIKENKEISOKUKI | RIKENKEISOKUKI | RIKENKEISOKUKI | RIKENKEISOKUKI | RIKENKEISOKUKI | RIKENKEISOKUKI | OBISHIKEIKI | OBISHIKEIKI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | UNISEIKI | UNISEIKI | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Hardened Square JIS 1 with Base (JIS B7526 Compliant Product) | I-Shaped, Right-Angle Ruler, Class 1 Hardened, JIS B7526 Standard Product | I-Shaped, Straightedge Ruler, Class A Hardened, JIS B7514 Standard Product | Rectangular Hardened Straight Edge Class A JIS B7514 Compliant Product | ||||||||||||||||||||||||||||||
Days to Ship | 10 Days or more | 12 Days or more | 10 Days or more | 8 Days or more | 14 Days or more | 14 Days or more | 14 Days or more | 14 Days or more | 14 Days or more | 14 Days or more | 14 Days or more | 14 Days or more | 25 Days or more | 25 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 10 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 10 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 12 Days or more |
Product Model | Stand With Speed Square | I-Shaped Square | Stand With Speed Square | Flat Speed Square | Stand With Speed Square | Flat Speed Square | Straight Edge | Straight Edge | Straight Edge | Straight Edge | Straight Edge | Straight Edge | Straight Edge | Straight Edge | Stand With Speed Square | Free Speed Square | Others | Straight Edge | Straight Edge | - | - | - | - | - | - | - | - | - | - | - | - | Angled Ruler | Others | Others |
Beam Length(mm) | 75 ~ 300 | 50 ~ 300 | 50 ~ 1000 | 50 ~ 1000 | 50 ~ 1000 | 50 ~ 1000 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 200 ~ 300 | 1800 |
Precision(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.1 mm or less per 100 mm | - | ±0.1 (R gauge) / ±0.05 (diameter gauge) / ±0.15 (ruler) | 0.0115 ~ 0.02 | 0.005 ~ 0.012 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Angle(°) | 90 | 90 | 90 | 90 | 90 | 90 | 180 | 180 | 180 | 180 | 180 | 180 | 180 | 180 | 90 | - | - | 180 | 180 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Stand Length(mm) | 50 ~ 200 | 40 ~ 200 | 37 ~ 550 | 38 ~ 550 | 41 ~ 550 | 40 ~ 550 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Scale | Not Included | Not Included | - | - | - | - | - | - | - | - | - | - | - | - | Not Included | Included | Included | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Not Included | Included | Included |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy