Electrical Enclosure Interior Parts

• 

  CBS-EC Insulator

  Kameda Denki

  Ideal high-voltage wire support for cubicles.
  
  [Features]
  · Insulation support for low voltages (AC600V or less).
  · Lineup which includes different heights and screw diameters is available, making it easy to support bus bars and anything else requiring insulation.
  · Made of polypropylene for superior shock resistance and insulation

  • Volume Discount

  Days to Ship:	15 Days or more

• 

  Epoxy Insulator

  Kameda Denki

  Epoxy insulation for high voltages (6kV).
  
  [Features]
  ▪ Manufactured for reliable quality using resin formation technology employing JIS standard (JISC3851) as a reference standard.
  · Smaller, lighter, more shock resistant, providing better electrical and mechanical properties than traditional porcelain insulators

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  BH type battery holder with lead wire

  Takachi Electronics Enclosure

  BH type battery holder with lead wire

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  HU Type Coin Battery Holder【1-50 Pieces Per Package】

  Takachi Electronics Enclosure

  [Features]
  · This series of coin battery holders offers a total of 7 different sizes covering LR44 as well as CR1220 to CR2450.
  · The terminals have a baseboard mounting pin structure.
  · Because the holder has a compact design, a space-saving baseboard can be used.
  · The product is made of LCP resin containing glass which features a high heat resistance temperature.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Battery Installation Box, LD-Type

  Takachi Electronics Enclosure

  [Features]
  - One-touch installation.
  - The stepped tab is compatible with plate thicknesses from t1.0 to t3.0.
  - Screw-attachable; two M3 countersink holes for screws available on the left and right of the unit.
  - ⊕ and ⊖ battery terminal symbols provided to prevent reverse insertion.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  IT type battery terminal【10 Pieces Per Package】

  Takachi Electronics Enclosure

  [Features]
  ・We have added D and C sizes of the IT-1 and IT-2 series to the battery terminal series.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  CST-type CR2032 coin battery terminal【10 Pieces Per Package】

  Takachi Electronics Enclosure

  [Features]
  ・CR2032 coin battery terminal.
  ・The negative terminal side has “CR2032” and “－（minus）” engraved on it.
  · Already included in the CS and CSS series. Use in cases of loss or damage.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  CBS-ED Insulators

  Kameda Denki

  [Features]
  - High-pressure electric line supports (6.6 kV) suited for thick-diameter cables inside cubicles.
  - Use for KIP wires from 60sq to 200sq.
  - Hinged for easy wiring work. Fix securely with a single screw.
  - Wire restraint adapter uses flexible elastomer, allowing you to mount wires without damaging them.

  • Volume Discount

  Days to Ship:	15 Days or more

• 

  Clasp End Cover【10 Pieces Per Package】

  Kameda Denki

  A protective cap for U clasps and multi-angle clasps.
  
  [Features]
  · Made of soft PVC and provides safe protection just by inserting it into the angle channel.
  · Easy installation and removal; fully reusable.
  · Fix in place with glue for areas subject to frequent touching

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  High Pressure Relay Terminal Block

  Kameda Denki

  A high-voltage relay terminal block for epoxy-insulator installation.
  
  [Features]
  · No vinyl chloride is used in the protective cover or elsewhere.
  · Charging element is covered by a see-through cover to ensure safety

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Part Box【20 Pieces Per Package】

  Shinohara Electric

  A panel-interior storage box for small items
  
  [Features]
  · See-through plastic lets you see what's inside.
  · One-touch opening and closing makes it easy to insert or remove extra parts.
  · Even more useful when combined with a drawing holder.
  · Can be screwed in or attached with double-sided tape.
  · Lightweight and resistant to breaking

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	12 Days or more

• 

  Ventilation Gallery (iron plate / stainless steel)

  Shinohara Electric

  Use as a ventilation element for operating boards, control panels, and cubicles.
  
  [Features]
  - The ventilation gallery eliminates the need for ventilation holes on the panel, saving time.
  - Simple installation.
  - Insert the ventilation gallery into the panel hole and screw in the retention frame on the back.
  - Accessories like a blow prevention cover, insect screen and anti-dust filter provide the features needed for your applications.
  - Use a blow prevention cover (which redirects blown-in rainwater to the outside) for outdoor applications (IPX2).

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Crossbars for Slim Breakers【1-100 Pieces Per Package】

  Shinohara Electric

  Crossbars for neutral terminal integrated breakers.
  
  [Features]
  · The structure does not cause uneveness on the main line bar, so it can be used with conventional designs.
  · Also, the wiring work is easy.
  · An insulated tube allowing you to use the product with confidence has been provided.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Over-bar for Slim Breaker (3-phase 4-wire type - 30mm)

  Shinohara Electric

  Crossbars for neutral terminal integrated breakers. (3-phase, 4-wire type, 30 mm)
  
  [Features]
  · The structure does not cause uneveness on the main line bar, so it can be used with conventional designs.
  · Also, the wiring work is easy.
  · An insulated tube allowing you to use the product with confidence has been provided.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	12 Days or more

• 

  Crossbars for Panelboards【50-100 Pieces Per Package】

  Shinohara Electric

  Use these crossbars for panelboard breakers.
  
  [Features]
  · The time and effort that is required each time when assembling panel boards can be eliminated by using these pre-standardized crossbars.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	11 Days or more

• 

  Wiring Bracket【14 Pieces Per Package】

  Kowa Kasei

  A combined wiring storage space and base rail, saving space in the panel as well as installation time
  
  [Features]
  · A combination bracket and base rail which includes wiring storage space.
  · Terminal blocks and other control parts can be attached to the front of the wiring storage space, saving space when wiring the panel.
  · The combination wiring storage space and base rail saves you time by letting you install both components in the panel at the same time.
  · In-out wiring is possible from the wiring hole and opening.
  · Beveled wiring hole

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Wiring Bracket Bushing【900 Pieces Per Package】

  Kowa Kasei

  For protection of wiring holes of the wiring bracket

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Coin Battery Holder, BCR Series【1-100 Pieces Per Package】

  Takachi Electronics Enclosure

  Coin battery holder (for CR2032) (BCR)
  
  [Features]
  · Structure makes it difficult to insert batteries the wrong way.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  Mounting Base - BMP Series, Steel

  Takachi Electronics Enclosure

  Mounting base (plastic, wood, iron) (BMP)
  
  [Features]
  · Steel mounting base.
  · Strength enables machining to be performed easily.
  · Mounting base made from inexpensive ABS plastic.
  · BMP0811P through BMP1616P have a flat structure, while BMP0825P, BMP1423P, and BMP1520P through BMP2020P have a reinforcement rib on the back surface of their mounting bases.
  · There are no models that correspond to BCAS050604, 050605, 060905, 071005, 080806, 101807, or 102307.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Lithium Battery Holder CR2 Series

  Takachi Electronics Enclosure

  Lithium battery holder (CR-2)
  
  [Features]
  · Operating temperature range: -10℃ to 60℃

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Terminal Cover, NTC Series

  Takachi Electronics Enclosure

  Terminal Cover (NTC)
  
  [Features]
  - Terminal cover with knockout holes for wiring.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  Terminal Cover, NTK Series

  Takachi Electronics Enclosure

  Terminal Cover (NTK)
  
  [Features]
  · Dedicated terminal cover with holes bored into it for wiring.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Button Battery Holder, PD23 Series【1-100 Pieces Per Package】

  Takachi Electronics Enclosure

  Button battery holder (PD23)
  
  [Features]
  · Operating temperature range: -40℃ to 80℃

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  Flame Retardant Battery Pushing Sponge, SCM Series【10 Pieces Per Package】

  Takachi Electronics Enclosure

  Flame Retardant Battery Pushing Sponge (SCM)
  
  [Features]
  - Flame retardant sponge with single-sided adhesive tape.
  - Use to prevent vibration of batteries or after inserting 006P batteries and battery holders inside plastic cases.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Lead-free Universal Circuit Board, TNF Series

  Takachi Electronics Enclosure

  Lead-free Universal Circuit Board (TNF)
  
  [Features]
  · Universal circuit board with a 2.54 mm pitch.
  · Circuit board sized just right for the SW, SS, SY, TW, TWN, and PW Series of cases.
  · We took environmental measures into consideration and used lead-free solder.
  · Because the TNF160-240 is a general purpose universal circuit board, please cut it before use.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Circuit Board Pushing Sponge, UR Series【10 Pieces Per Package】

  Takachi Electronics Enclosure

  Circuit Board Pushing Sponge (UR)
  
  [Features]
  · When anchoring the circuit board to the case, you can pinch it with the sponge surface or anchor it with the surface of adhesive tape.
  · Also, it can be adapted for use in a wide variety of applications.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Coin Battery Holder　CH7410 Series

  Takachi Electronics Enclosure

  Coin Battery Holder　(CH7410)
  
  [Features]
  · Made from PPS plastic for high temperature heat resistance, and can be mounted with reflow soldering.
  · Terminal part has gold plate finishing on phosphor bronze.
  · Batteries may be dislocated due to falls or violent impact.
  · We do not recommend using it for equipment that may be subject to falls.
  · Operating temperature range: -55℃ to 85℃.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  Installed battery box with an LDN-type lead wire.

  Takachi Electronics Enclosure

  [Features]
  · A battery box that can be installed in one step.
  · The tab part is stepped and so is compatible with plate thicknesses of t1.0 to t3.0.
  · Secure attachment with screws is possible because there are two M3 countersink holes for screws on the left and right of the main unit.
  · Lead-free solder has been applied to the lead wire (UL standard product length = 140 mm) for lead-free compatibility.
  ▪ The structure includes the battery terminal symbols ⊕ and ⊖ to prevent reverse insertion.
  · The external dimensions of the alkaline battery/manganese battery may differ slightly depending on the manufacturer.
  · In addition, the battery box has a small size tolerance. Therefore, please use a battery retainer sponge (SCM Series) to hold the battery in position.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Externally-mounted Battery Box, MD Series

  Takachi Electronics Enclosure

  Externally-Mounted Battery Box (MD)
  
  [Features]
  - Operating temperature range: -10℃ to 60℃.
  - Externally mounted battery box with a wide range of applications.
  - One-touch cover opening for easy battery replacement.
  - Full grain finish with R attached, making it optimal as a mobile battery box.
  - The dimensions of alkaline/manganese dry cells differ by manufacturer.
  - Some extra room is provided for using a battery-pushing sponge (SCM series).
  - Flame retardant ABS (UL94V-0).
  - MD-006P incorporates a AAA holder and can also be used as a dedicated holder.
  - ⊕ and ⊖ battery terminal symbols included to prevent reverse insertion.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  SN, BH, MP Type Battery Holder with Lead Wire

  Takachi Electronics Enclosure

  Battery holder with lead wire for D, C, AA, AAA and N batteries

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Coin Battery Holder, BK-Type【10 Pieces Per Package】

  Takachi Electronics Enclosure

  The BK-5067, which is compatible with the thin-type CR2016 battery, has been added to the lineup of metal coin battery holders. In addition, the BK-2032M negative contact terminal which accepts the CR2032 coin battery has been included.
  
  [Features]
  · A simple metal coin battery holder for minimal, limited installation space.
  · When used in mass production, a carrier taping package (TR type) that can support automated mounting machines provides added convenience.
  · The negative terminal battery contact can be installed onto a pad on top of a mainboard. Please use the BK-2032 negative terminal (for BK-888 only).

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Coin Battery Holder, CH Series

  Takachi Electronics Enclosure

  [Features]
  · Coin battery holder (CH74)

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Lithium Battery Holder CR123A Series

  Takachi Electronics Enclosure

  [Features]
  · Lithium battery holder (CR123A)

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  LCSC Series Silicone Cover

  Takachi Electronics Enclosure

  Silicone cover for the LC series.
  [Features]
  · Choose from 7 colors: red, yellow, green, blue, navy blue, dark gray and light gray.
  · Made from silicone rubber.
  [Applications]
  · Can be used as an interior part to protect from impact or penetration of foreign matter from outside.
  

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  Coin Battery Holder SMTM Series【10-700 Pieces Per Package】

  Takachi Electronics Enclosure

  [Features]
  · A simple coin battery holder made of metal.
  · New type for CR1632 has been added.
  · A carrier taping package (TR type) that can support automated mounting machines is convenient for use in mass production.
  · For battery contacts of negative polarity, please install a pad on the circuit board, or use negative terminal “BK-2032M” (for SMTM2032 only).

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  SMTU-Type Coin / Button Cell Holder【1-750 Pieces Per Package】

  Takachi Electronics Enclosure

  Coin battery holder with 8 sizes to choose from, including LR44 and CR1220 to CR2450.
  [Features]
  · Structure in which the terminal is mounted to the surface (SMT).
  · When used in mass production, carrier taping wrapping (TR type) that is compatible with an automatic mounting machine is convenient.
  · Gold-plated specification (SMTU1220-G, SMTU2032-1-G).
  [Applications]
  · Made from high heat-resistant LCP resin containing glass. Compatible with lead-free solder reflow.
  · Compact design so it is possible to conserve circuit board space.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Battery Holder with Lead Wire / Pin / Snap Terminal【1-50 Pieces Per Package】

  Takachi Electronics Enclosure

  [Features]
  This is a battery holder with an included lead wire pin snap terminal (SN).

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Strap, STP Series

  Takachi Electronics Enclosure

  Strap (STP)
  
  [Features]
  · Strap equipped with a hook made of metal.
  · Neck strap type includes removable parts and parts with adjustable length.
  · Tu be used as a set with the CR key ring.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Battery Holder, BH-9V Series

  Takachi Electronics Enclosure

  006P Battery holder (BH-9V)
  
  [Features]
  · Lead free-compliant

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Corner Cap for FC【4 Pieces Per Package】

  Takachi Electronics Enclosure

  Corner Cap for FC (FC-BK)
  
  [Features]
  · FC-BK-S is for use with the C4 Series.
  · For other mechanisms, use FC-BK- .

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  Small Button Battery Holder, PB621 Series【10 Pieces Per Package】

  Takachi Electronics Enclosure

  Small Button Battery Holder (PB621)
  
  [Features]
  - Remove batteries as shown in the following diagram using pins, negative precision screwdrivers, or the like.
  - Using excessive force when removing by hand may damage the holder.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Relay Box Accessories (Short Bar)【10 Pieces Per Package】

  OHM Electric

  Accessory for relay box (short bar)

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  PS Series Portable Plastic Case

  Takachi Electronics Enclosure

  A plastic case with a top and bottom cover construction that fits together without needing screws.
  [Features]
  · Small, rounded case that fits in the hand easily.
  5 types of color specifications: white, black, cobalt blue, green and pink.
  Suitable for small devices such as wireless devices or remote controls.
  Has a hole for mounting the optional strap.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  BV-50N type coin battery holder【50 Pieces Per Package】

  Takachi Electronics Enclosure

  [Features]
  · Vertical battery holder for CR2450.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  Battery Holder with MP-PC Type Pin

  Takachi Electronics Enclosure

  [Features]
  · Battery holder with an MP-PC type pin and a base mounting pin that uses hard copper wire.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

Loading...