(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.

All Categories

Categories

Applications

Brands

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products
Order/Quote

Part Number Checker

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.

    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Locating Pins with Configurable Head - Round or diamond shaped head with tapered tip and stepped shank.

Locating Pins with Configurable Head - Round or diamond shaped head with tapered tip and stepped shank.
  • Spec Change

MISUMI

MISUMI

Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.

  • inCAD Components

PDFP.2019-1560

Part Number

Configured Part Number is shown.

Locating Pins - Setscrew Mounting Shank, Circumference Groove:Related Image
・Materials
Material
No.		[ M ]Material[ S ]Surface Treatment[ H ]HardnessType
RoundDiamond
①O1 Tool Steel Equivalent-Treated Hardness: 60 ~ 63HRCJPDTSJPDTD
②O1 Tool Steel EquivalentHard Chrome PlatingHardness: 50 ~ 55HRC
Plating Hardness: 750HV ~		GJPDTSGJPDTD
③304 Stainless Steel--SJPDTSSJPDTD
④304 Stainless SteelHard Chrome PlatingPlating Hardness: 750HV ~--
⑤440C or 420 Stainless Steel-Treated Hardness: 50 ~ 55HRCCJPDTSCJPDTD

Specifications

Part Number-P-L-B-G-A-Flat Position
JPDTD10-P10.05-L22-B7.5-G5-A14.3-X
■Set Screw Flat Shape
Part NumberD Dimension Tolerance
g6		P
0.01 mm Increment		L
1 mm Increment		B
0.1 mm Increment		G
1 mm Increment		A
0.1 mm Increment		Flat PositionhCmApplicable
Set Screws		(W)
TypeShapeDWhen D<PWhen D≥P
Set Screw Flat
JPDT
GJPDT
SJPDT
CJPDT		S
Round
D
Diamond		6-0.004
-0.012		5.00–10.0012–205.0–20.03–92.0–8.0X
Y

[ ! ]Applicable to diamond shape only.		1.013M431.5
8-0.005
-0.014		5.00–13.0014–225.0–30.0
(15.0)		2.0–12.01.21.54M53.51.8
105.00–15.0015–255.0–30.0
(25.0)		2.0–16.01.224M642.2
12-0.006
-0.017		5.00–16.0015–252.0–20.01.224M652.5
1610.00–25.0015–355.0–30.02.0–28.02.035M874
20-0.007
-0.020		13.00–30.0027–402.0–36.02.035M895
[ ! ]B dimension with ( ) are applicable for diamond shape.
[ ! ]Applicable set screws in the table are the recommended sizes for Notched Shape.

Price list

■Set Screw Flat Shape
DAvailable Sizes Round ShapeAvailable Sizes Diamond Shape
①
JPDTS		②
GJPDTS		③
SJPDTS		⑤
CJPDTS		①
JPDTD		②
GJPDTD		③
SJPDTD		⑤
CJPDTD
6        
8        
10        
12        
16        
20        

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
45
60
  1. 1
Part Number
CJPDTD6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1]-G[3-9/1]-A[2-8/0.1]-[X,​Y]
CJPDTD8-P[5-13/0.01]-L[14-22/1]-B[5-15/0.1]-G[3-9/1]-A[2-12/0.1]-[X,​Y]
CJPDTD10-P[5-15/0.01]-L[15-25/1]-B[5-20/0.1]-G[3-9/1]-A[2-16/0.1]-[X,​Y]
CJPDTD12-P[5-16/0.01]-L[15-25/1]-B[5-20/0.1]-G[3-9/1]-A[2-20/0.1]-[X,​Y]
CJPDTD16-P[10-25/0.01]-L[15-35/1]-B[5-20/0.1]-G[3-9/1]-A[2-28/0.1]-[X,​Y]
CJPDTD20-P[13-30/0.01]-L[27-40/1]-B[5-20/0.1]-G[3-9/1]-A[2-36/0.1]-[X,​Y]
GJPDTD6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1]-G[3-9/1]-A[2-8/0.1]-[X,​Y]
GJPDTD8-P[5-13/0.01]-L[14-22/1]-B[5-15/0.1]-G[3-9/1]-A[2-12/0.1]-[X,​Y]
GJPDTD10-P[5-15/0.01]-L[15-25/1]-B[5-25/0.1]-G[3-9/1]-A[2-16/0.1]-[X,​Y]
GJPDTD12-P[5-16/0.01]-L[15-25/1]-B[5-25/0.1]-G[3-9/1]-A[2-20/0.1]-[X,​Y]
GJPDTD16-P[10-25/0.01]-L[15-35/1]-B[5-30/0.1]-G[3-9/1]-A[2-28/0.1]-[X,​Y]
GJPDTD20-P[13-30/0.01]-L[27-40/1]-B[5-30/0.1]-G[3-9/1]-A[2-36/0.1]-[X,​Y]
JPDTD6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1]-G[3-9/1]-A[2-8/0.1]-[X,​Y]
JPDTD8-P[5-13/0.01]-L[14-22/1]-B[5-15/0.1]-G[3-9/1]-A[2-12/0.1]-[X,​Y]
JPDTD10-P[5-15/0.01]-L[15-25/1]-B[5-25/0.1]-G[3-9/1]-A[2-16/0.1]-[X,​Y]
JPDTD12-P[5-16/0.01]-L[15-25/1]-B[5-25/0.1]-G[3-9/1]-A[2-20/0.1]-[X,​Y]
JPDTD16-P[10-25/0.01]-L[15-35/1]-B[5-30/0.1]-G[3-9/1]-A[2-28/0.1]-[X,​Y]
JPDTD20-P[13-30/0.01]-L[27-40/1]-B[5-30/0.1]-G[3-9/1]-A[2-36/0.1]-[X,​Y]
SJPDTD6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1]-G[3-9/1]-A[2-8/0.1]-[X,​Y]
SJPDTD8-P[5-13/0.01]-L[14-22/1]-B[5-15/0.1]-G[3-9/1]-A[2-12/0.1]-[X,​Y]
SJPDTD10-P[5-15/0.01]-L[15-25/1]-B[5-20/0.1]-G[3-9/1]-A[2-16/0.1]-[X,​Y]
SJPDTD12-P[5-16/0.01]-L[15-25/1]-B[5-20/0.1]-G[3-9/1]-A[2-20/0.1]-[X,​Y]
SJPDTD16-P[10-25/0.01]-L[15-35/1]-B[5-20/0.1]-G[3-9/1]-A[2-28/0.1]-[X,​Y]
SJPDTD20-P[13-30/0.01]-L[27-40/1]-B[5-20/0.1]-G[3-9/1]-A[2-36/0.1]-[X,​Y]
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSHead Shape Material Heat Treatment Surface Finish Positioning Side Outer Diameter P
(mm) 		Mounted Side Outer Diameter D
(mm) 		Mounting Section Length L
(mm) 		ℓ1
(mm) 		A
(mm) 		Flat Position G
(mm) 		Positioning Part Length B
(mm)
1 Piece(s)

10 Days or more

10Diamond[Stainless Steel] 440C or 420 Stainless SteelHardened[None] No5 ～ 10612 ～ 20-2 ～ 8X Direction [X] / Y Direction [Y]3 ～ 95 ～ 20
1 Piece(s)

10 Days or more

10Diamond[Stainless Steel] 440C or 420 Stainless SteelHardened[None] No5 ～ 13814 ～ 22-2 ～ 12X Direction [X] / Y Direction [Y]3 ～ 95 ～ 15
1 Piece(s)

10 Days or more

10Diamond[Stainless Steel] 440C or 420 Stainless SteelHardened[None] No5 ～ 151015 ～ 25-2 ～ 16X Direction [X] / Y Direction [Y]3 ～ 95 ～ 20
1 Piece(s)

10 Days or more

10Diamond[Stainless Steel] 440C or 420 Stainless SteelHardened[None] No5 ～ 161215 ～ 25-2 ～ 20X Direction [X] / Y Direction [Y]3 ～ 95 ～ 20
1 Piece(s)

10 Days or more

10Diamond[Stainless Steel] 440C or 420 Stainless SteelHardened[None] No10 ～ 251615 ～ 35-2 ～ 28X Direction [X] / Y Direction [Y]3 ～ 95 ～ 20
1 Piece(s)

10 Days or more

10Diamond[Stainless Steel] 440C or 420 Stainless SteelHardened[None] No13 ～ 302027 ～ 4082 ～ 36X Direction [X] / Y Direction [Y]3 ～ 95 ～ 20
1 Piece(s)

15 Days or more

10Diamond[Steel] O1 Tool SteelHardenedHard Chrome Plating5 ～ 10612 ～ 20-2 ～ 8X Direction [X] / Y Direction [Y]3 ～ 95 ～ 20
1 Piece(s)

15 Days or more

10Diamond[Steel] O1 Tool SteelHardenedHard Chrome Plating5 ～ 13814 ～ 22-2 ～ 12X Direction [X] / Y Direction [Y]3 ～ 95 ～ 15
1 Piece(s)

15 Days or more

10Diamond[Steel] O1 Tool SteelHardenedHard Chrome Plating5 ～ 151015 ～ 25-2 ～ 16X Direction [X] / Y Direction [Y]3 ～ 95 ～ 25
1 Piece(s)

15 Days or more

10Diamond[Steel] O1 Tool SteelHardenedHard Chrome Plating5 ～ 161215 ～ 25-2 ～ 20X Direction [X] / Y Direction [Y]3 ～ 95 ～ 25
1 Piece(s)

15 Days or more

10Diamond[Steel] O1 Tool SteelHardenedHard Chrome Plating10 ～ 251615 ～ 35-2 ～ 28X Direction [X] / Y Direction [Y]3 ～ 95 ～ 30
1 Piece(s)

15 Days or more

10Diamond[Steel] O1 Tool SteelHardenedHard Chrome Plating13 ～ 302027 ～ 4082 ～ 36X Direction [X] / Y Direction [Y]3 ～ 95 ～ 30
1 Piece(s)

10 Days or more

10Diamond[Steel] O1 Tool SteelHardened[None] No5 ～ 10612 ～ 20-2 ～ 8X Direction [X] / Y Direction [Y]3 ～ 95 ～ 20
1 Piece(s)

10 Days or more

10Diamond[Steel] O1 Tool SteelHardened[None] No5 ～ 13814 ～ 22-2 ～ 12X Direction [X] / Y Direction [Y]3 ～ 95 ～ 15
1 Piece(s)

10 Days or more

10Diamond[Steel] O1 Tool SteelHardened[None] No5 ～ 151015 ～ 25-2 ～ 16X Direction [X] / Y Direction [Y]3 ～ 95 ～ 25
1 Piece(s)

10 Days or more

10Diamond[Steel] O1 Tool SteelHardened[None] No5 ～ 161215 ～ 25-2 ～ 20X Direction [X] / Y Direction [Y]3 ～ 95 ～ 25
1 Piece(s)

10 Days or more

10Diamond[Steel] O1 Tool SteelHardened[None] No10 ～ 251615 ～ 35-2 ～ 28X Direction [X] / Y Direction [Y]3 ～ 95 ～ 30
1 Piece(s)

10 Days or more

10Diamond[Steel] O1 Tool SteelHardened[None] No13 ～ 302027 ～ 4082 ～ 36X Direction [X] / Y Direction [Y]3 ～ 95 ～ 30
1 Piece(s)

9 Days or more

10Diamond[Stainless Steel] 304 Stainless SteelNo[None] No5 ～ 10612 ～ 20-2 ～ 8X Direction [X] / Y Direction [Y]3 ～ 95 ～ 20
1 Piece(s)

9 Days or more

10Diamond[Stainless Steel] 304 Stainless SteelNo[None] No5 ～ 13814 ～ 22-2 ～ 12X Direction [X] / Y Direction [Y]3 ～ 95 ～ 15
1 Piece(s)

9 Days or more

10Diamond[Stainless Steel] 304 Stainless SteelNo[None] No5 ～ 151015 ～ 25-2 ～ 16X Direction [X] / Y Direction [Y]3 ～ 95 ～ 20
1 Piece(s)

9 Days or more

10Diamond[Stainless Steel] 304 Stainless SteelNo[None] No5 ～ 161215 ～ 25-2 ～ 20X Direction [X] / Y Direction [Y]3 ～ 95 ～ 20
1 Piece(s)

9 Days or more

10Diamond[Stainless Steel] 304 Stainless SteelNo[None] No10 ～ 251615 ～ 35-2 ～ 28X Direction [X] / Y Direction [Y]3 ～ 95 ～ 20
1 Piece(s)

9 Days or more

10Diamond[Stainless Steel] 304 Stainless SteelNo[None] No13 ～ 302027 ～ 4082 ～ 36X Direction [X] / Y Direction [Y]3 ～ 95 ～ 20

Loading...

  1. 1

Support Information

Characteristics of locating pins in other forms

Product NameFeatureCatalog
Small Diameter Locating PinsLocating Pins with Ø4 or less diameter suitable for small works.Click here
Locating Pins for Height AdjustingLocating Pins with short head for thin PC boards.Click here
Nonmagnetic Locating PinsNonmagnetic Aluminum locating pins suitable for environments where magnetism must be avoided. Click here
Plastic Locating PinsPlastic Locating Pins prevent work damages.Click here
Height Adjusting PinsLocating Pins suitable for locating in vertical direction.Click here
Support PinsPins for use in higher position to avoid interferences.Click here

Compatible Models

CategoryManual X-Axis StagesLocating Unit ComponentsAluminum ExtrusionsJig BushingsDoor & Drawer Handles
ImageLocating Pins - Manual X-Axis StagesLocating Pins - Locating Unit ComponentsLocating Pins -Aluminum ExtrusionsLocating Pins - Jig BushingsLocating Pins- Door & Drawer Handles
 

Basic Information

Basic Shape Large Head / Small Head Head Tip Shape Tapered Drive No
Shank Style Set Screw Flat Tolerance of Positioning Side Outer Diameter 0/-0.01 Shank Dia. Tolerance g6

Configure

Clear All

24 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Material

    • Steel
      • O1 Tool Steel
    • Stainless Steel
      • 304 Stainless Steel
      • 440C or 420 Stainless Steel

    Clear

  • Heat Treatment

    • No
    • Hardened

    Clear

  • Surface Finish

    • None
      • No
    • Hard Chrome Plating

    Clear

  • Positioning Side Outer Diameter P(mm)

     [5-30/0.01mm Unit(s)]

    Clear

  • Mounted Side Outer Diameter D(mm)

    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Clear

  • Mounting Section Length L(mm)

     [12-40/1mm Unit(s)]

    Clear

  • ℓ1(mm)

    • 8

    Clear

  • A(mm)

     [2-36/0.1mm Unit(s)]

    Clear

  • Flat Position

    • X Direction [X]
    • Y Direction [Y]

    Clear

  • G(mm)

     [3-9/1mm Unit(s)]

    Clear

  • Positioning Part Length B(mm)

     [5-30/0.1mm Unit(s)]

    Clear

  • type

    • CJPDTD
    • CJPDTS
    • GJPDTD
    • GJPDTS
    • JPDTD
    • JPDTS
    • SJPDTD
    • SJPDTS

    Clear

  • Head Shape

    • Round
    • Diamond

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 9 Days or Less
    • 10 Days or Less
    • 15 Days or Less

    Clear

Specify Alterations

Additional Products in this Category

Complementary Products

Tech Support

Technical Support
Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.
Technical Inquiry

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information
Contact Us

Inquiry Format

Go to Mobile site

Copyright © MISUMI Corporation All Rights Reserved.