(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Pipe Manifolds with the socket configurable in size.
Part Number
Configured Part Number is shown.
Type | [ M ]Material | [ S ]Surface Treatment | ||||
Tapped Socket | Threaded Socket | Main Body | Socket | |||
Threaded | Tapped | |||||
Both Ends Threaded | SGFF | - | SGP | SGP | 1025 Carbon Steel(1020 Carbon Steel for M5) | Trivalent Chromate |
SGFM | - | Electroless Nickel Plating | ||||
SUFF | SUFFA | 304 Stainless Steel | 304 Stainless Steel (304 Stainless Steel for M5) | 304 Stainless Steel | - | |
Both Ends Tapped | SGFMF | SGFMFA | SGP | SGP | 1025 Carbon Steel(1020 Carbon Steel for M5) | Trivalent Chromate |
SUFMF | - | 304 Stainless Steel | 304 Stainless Steel (304 Stainless Steel for M5) | 304 Stainless Steel | - |
Part Number | - | H (Number of Holes) | - | P | - | S | - | Q | - | A | - | B | - | C | - | D | - | E | ||
SUFF25A | - | 3 | - | P50 | - | S50 | - | Q50 | - | A3 | - | B2 | - | C2 | For 3 Socket Pitch | |||||
SGFMF25A | - | 5 | - | P50 | - | S50 | - | Q50 | - | A3 | - | B2 | - | C3 | - | D2 | - | E3 | For 5 Socket Pitch | |
SGFMF25A | - | 4 | - | P50 | - | S50 | - | Q50 | - | A3 | - | B2 | - | C0 | - | D2 | For 4 Socket Pitch but C port is not needed (Number of sockets is 3). | |||
[ ! ]Select A~E according to the number of holes (H). Specify from A to B when H=2, up to C when H=3, up to D when H=4 and up to E when H=5. |
■V1 and T1 Dimensions | |||
d1 Rc (PT) | V1 | W1 | T1 |
5 (M5) | 10 | 7.5 | D/2+W1-(L-H) |
1 (1/8) | 15 | 8.1 | |
2 (1/4) | 20 | 11.4 | |
3 (3/8) | 25 | 12 | |
4 (1/2) | 30 | 15.6 | |
6 (3/4) | 35 | 17.7 | |
■V2 and T2 Dimensions | |||
d1 R (PT) | V2 | W2 | T2 |
5 (M5) | 6 | 7.5 | D/2+W2-A |
1 (1/8) | 10.5 | 10 | |
2 (1/4) | 13.8 | 15 | |
3 (3/8) | 17.3 | 17 | |
4 (1/2) | 21.7 | 20 | |
6 (3/4) | 27.2 | 23 | |
* For sockets themselves and socket L, H and A dimensions, see Click here |
Part Number | H (Number of Holes) | P, S, Q | Rc (PT) R (PT) M (Coarse) | d2 | D | d | |||||||
Type | No. | 1mm Increment | A, B, C, D, E | R (PT) | Material: SGP | Material: Stainless Steel | |||||||
Both Ends Threaded Type | Tapped Socket SGFF SGFM SUFF | Threaded Socket SUFFA | 15A | 2 3 4 5 | 35~150 | 0 (No Hole) | 5 (M5) | 1 (1/8) | 1/2 | 21.7 | 16.1 | 16.1 | |
20A | 35~150 | 0 (No Hole) | 5 (M5) | 1 (1/8) | 2 (1/4) | 3/4 | 27.2 | 21.6 | 21.4 | ||||
25A | 40~150 | 0 (No Hole) | 1 (1/8) | 2 (1/4) | 3 (3/8) | 1 | 34 | 27.6 | 27.2 | ||||
32A | 50~150 | 0 (No Hole) | 2 (1/4) | 3 (3/8) | 4 (1/2) | 1 1/4 | 42.7 | 35.7 | 35.5 | ||||
40A | 60~150 | 0 (No Hole) | 3 (3/8) | 4 (1/2) | 6 (3/4) | 1 1/2 | 48.6 | 41.6 | 41.2 | ||||
Both Ends Tapped Type | Tapped Socket SGFMF SUFMF | Threaded Socket SGFMFA | 15A | 2 3 4 5 | 35 (45)~150 | 0 (No Hole) | 5 (M5) | 1 (1/8) | 1/2 | 21.7 | 16.1 | 16.1 | |
20A | 35 (45)~150 | 0 (No Hole) | 5 (M5) | 1 (1/8) | 2 (1/4) | 3/4 | 27.2 | 21.6 | 21.4 | ||||
25A | 40 (50)~150 | 0 (No Hole) | 1 (1/8) | 2 (1/4) | 3 (3/8) | 1 | 34 | 27.6 | 27.2 | ||||
32A | 50 (60)~150 | 0 (No Hole) | 2 (1/4) | 3 (3/8) | 4 (1/2) | 1 1/4 | 42.7 | 35.7 | 35.5 | ||||
40A | 60 (70)~150 | 0 (No Hole) | 3 (3/8) | 4 (1/2) | 6 (3/4) | 1 1/2 | 48.6 | 41.6 | 41.2 | ||||
[ ! ]Specify P, S and Q within the range of L=(H-1)xP+S+Q≤700. [ ! ]For Both Ends Tapped Type, minimum configurable values for S and Q are in ( ). [ ! ]For A to E, specify 0, 1, 2, 3, 4, 5 or 6 indicated before ( ). When selecting 0, pitch remains unchanged and the distance between sockets is 2xP. [ ! ]All sockets of Tapped Socket Type are female threaded, and all sockets of Threaded Socket Type are male threaded. [ ! ]For ordering, see the Ordering Example and Minimum Pitch Chart below. |
Size | M5 | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 |
M5 | 35 | 35 | 35 | 38 | 40 | 43 |
1/8 | 35 | 35 | 38 | 40 | 43 | 45 |
1/4 | 35 | 38 | 40 | 43 | 45 | 48 |
3/8 | 38 | 40 | 43 | 45 | 48 | 50 |
1/2 | 40 | 43 | 45 | 48 | 50 | 53 |
3/4 | 43 | 45 | 48 | 50 | 53 | 55 |
Specify a pitch larger than above values. |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
SUFF15A-2-P[35-150/1]-S[35-150/1]-Q[35-150/1]-A[0,1,5]-B[0,1,5] |
SUFF15A-3-P[35-150/1]-S[35-150/1]-Q[35-150/1]-A[0,1,5]-B[0,1,5]-C[0,1,5] |
SUFF15A-4-P[35-150/1]-S[35-150/1]-Q[35-150/1]-A[0,1,5]-B[0,1,5]-C[0,1,5]-D[0,1,5] |
SUFF15A-5-P[35-150/1]-S[35-150/1]-Q[35-150/1]-A[0,1,5]-B[0,1,5]-C[0,1,5]-D[0,1,5]-E[0,1,5] |
SUFF20A-2-P[35-150/1]-S[35-150/1]-Q[35-150/1]-A[0,1,2,5]-B[0,1,2,5] |
SUFF20A-3-P[35-150/1]-S[35-150/1]-Q[35-150/1]-A[0,1,2,5]-B[0,1,2,5]-C[0,1,2,5] |
SUFF20A-4-P[35-150/1]-S[35-150/1]-Q[35-150/1]-A[0,1,2,5]-B[0,1,2,5]-C[0,1,2,5]-D[0,1,2,5] |
SUFF20A-5-P[35-150/1]-S[35-150/1]-Q[35-150/1]-A[0,1,2,5]-B[0,1,2,5]-C[0,1,2,5]-D[0,1,2,5]-E[0,1,2,5] |
SUFF25A-2-P[40-150/1]-S[40-150/1]-Q[40-150/1]-A[0,1,2,3]-B[0,1,2,3] |
SUFF25A-3-P[40-150/1]-S[40-150/1]-Q[40-150/1]-A[0,1,2,3]-B[0,1,2,3]-C[0,1,2,3] |
SUFF25A-4-P[40-150/1]-S[40-150/1]-Q[40-150/1]-A[0,1,2,3]-B[0,1,2,3]-C[0,1,2,3]-D[0,1,2,3] |
SUFF25A-5-P[40-150/1]-S[40-150/1]-Q[40-150/1]-A[0,1,2,3]-B[0,1,2,3]-C[0,1,2,3]-D[0,1,2,3]-E[0,1,2,3] |
SUFF32A-2-P[50-150/1]-S[50-150/1]-Q[50-150/1]-A[0,2,3,4]-B[0,2,3,4] |
SUFF32A-3-P[50-150/1]-S[50-150/1]-Q[50-150/1]-A[0,2,3,4]-B[0,2,3,4]-C[0,2,3,4] |
SUFF32A-4-P[50-150/1]-S[50-150/1]-Q[50-150/1]-A[0,2,3,4]-B[0,2,3,4]-C[0,2,3,4]-D[0,2,3,4] |
SUFF32A-5-P[50-150/1]-S[50-150/1]-Q[50-150/1]-A[0,2,3,4]-B[0,2,3,4]-C[0,2,3,4]-D[0,2,3,4]-E[0,2,3,4] |
SUFF40A-2-P[60-150/1]-S[60-150/1]-Q[60-150/1]-A[0,3,4,6]-B[0,3,4,6] |
SUFF40A-3-P[60-150/1]-S[60-150/1]-Q[60-150/1]-A[0,3,4,6]-B[0,3,4,6]-C[0,3,4,6] |
SUFF40A-4-P[60-150/1]-S[60-150/1]-Q[60-150/1]-A[0,3,4,6]-B[0,3,4,6]-C[0,3,4,6]-D[0,3,4,6] |
SUFF40A-5-P[60-150/1]-S[60-150/1]-Q[60-150/1]-A[0,3,4,6]-B[0,3,4,6]-C[0,3,4,6]-D[0,3,4,6]-E[0,3,4,6] |
SUFFA15A-2-P[35-150/1]-S[35-150/1]-Q[35-150/1]-A[0,1,5]-B[0,1,5] |
SUFFA15A-3-P[35-150/1]-S[35-150/1]-Q[35-150/1]-A[0,1,5]-B[0,1,5]-C[0,1,5] |
SUFFA15A-4-P[35-150/1]-S[35-150/1]-Q[35-150/1]-A[0,1,5]-B[0,1,5]-C[0,1,5]-D[0,1,5] |
SUFFA15A-5-P[35-150/1]-S[35-150/1]-Q[35-150/1]-A[0,1,5]-B[0,1,5]-C[0,1,5]-D[0,1,5]-E[0,1,5] |
SUFFA20A-2-P[35-150/1]-S[35-150/1]-Q[35-150/1]-A[0,1,2,5]-B[0,1,2,5] |
SUFFA20A-3-P[35-150/1]-S[35-150/1]-Q[35-150/1]-A[0,1,2,5]-B[0,1,2,5]-C[0,1,2,5] |
SUFFA20A-4-P[35-150/1]-S[35-150/1]-Q[35-150/1]-A[0,1,2,5]-B[0,1,2,5]-C[0,1,2,5]-D[0,1,2,5] |
SUFFA20A-5-P[35-150/1]-S[35-150/1]-Q[35-150/1]-A[0,1,2,5]-B[0,1,2,5]-C[0,1,2,5]-D[0,1,2,5]-E[0,1,2,5] |
SUFFA25A-2-P[40-150/1]-S[40-150/1]-Q[40-150/1]-A[0,1,2,3]-B[0,1,2,3] |
SUFFA25A-3-P[40-150/1]-S[40-150/1]-Q[40-150/1]-A[0,1,2,3]-B[0,1,2,3]-C[0,1,2,3] |
SUFFA25A-4-P[40-150/1]-S[40-150/1]-Q[40-150/1]-A[0,1,2,3]-B[0,1,2,3]-C[0,1,2,3]-D[0,1,2,3] |
SUFFA25A-5-P[40-150/1]-S[40-150/1]-Q[40-150/1]-A[0,1,2,3]-B[0,1,2,3]-C[0,1,2,3]-D[0,1,2,3]-E[0,1,2,3] |
SUFFA32A-2-P[50-150/1]-S[50-150/1]-Q[50-150/1]-A[0,2,3,4]-B[0,2,3,4] |
SUFFA32A-3-P[50-150/1]-S[50-150/1]-Q[50-150/1]-A[0,2,3,4]-B[0,2,3,4]-C[0,2,3,4] |
SUFFA32A-4-P[50-150/1]-S[50-150/1]-Q[50-150/1]-A[0,2,3,4]-B[0,2,3,4]-C[0,2,3,4]-D[0,2,3,4] |
SUFFA32A-5-P[50-150/1]-S[50-150/1]-Q[50-150/1]-A[0,2,3,4]-B[0,2,3,4]-C[0,2,3,4]-D[0,2,3,4]-E[0,2,3,4] |
SUFFA40A-2-P[60-150/1]-S[60-150/1]-Q[60-150/1]-A[0,3,4,6]-B[0,3,4,6] |
SUFFA40A-3-P[60-150/1]-S[60-150/1]-Q[60-150/1]-A[0,3,4,6]-B[0,3,4,6]-C[0,3,4,6] |
SUFFA40A-4-P[60-150/1]-S[60-150/1]-Q[60-150/1]-A[0,3,4,6]-B[0,3,4,6]-C[0,3,4,6]-D[0,3,4,6] |
SUFFA40A-5-P[60-150/1]-S[60-150/1]-Q[60-150/1]-A[0,3,4,6]-B[0,3,4,6]-C[0,3,4,6]-D[0,3,4,6]-E[0,3,4,6] |
SUFMF15A-2-P[35-150/1]-S[45-150/1]-Q[45-150/1]-A[0,1,5]-B[0,1,5] |
SUFMF15A-3-P[35-150/1]-S[45-150/1]-Q[45-150/1]-A[0,1,5]-B[0,1,5]-C[0,1,5] |
SUFMF15A-4-P[35-150/1]-S[45-150/1]-Q[45-150/1]-A[0,1,5]-B[0,1,5]-C[0,1,5]-D[0,1,5] |
SUFMF15A-5-P[35-150/1]-S[45-150/1]-Q[45-150/1]-A[0,1,5]-B[0,1,5]-C[0,1,5]-D[0,1,5]-E[0,1,5] |
SUFMF20A-2-P[35-150/1]-S[45-150/1]-Q[45-150/1]-A[0,1,2,5]-B[0,1,2,5] |
SUFMF20A-3-P[35-150/1]-S[45-150/1]-Q[45-150/1]-A[0,1,2,5]-B[0,1,2,5]-C[0,1,2,5] |
SUFMF20A-4-P[35-150/1]-S[45-150/1]-Q[45-150/1]-A[0,1,2,5]-B[0,1,2,5]-C[0,1,2,5]-D[0,1,2,5] |
SUFMF20A-5-P[35-150/1]-S[45-150/1]-Q[45-150/1]-A[0,1,2,5]-B[0,1,2,5]-C[0,1,2,5]-D[0,1,2,5]-E[0,1,2,5] |
SUFMF25A-2-P[40-150/1]-S[50-150/1]-Q[50-150/1]-A[0,1,2,3]-B[0,1,2,3] |
SUFMF25A-3-P[40-150/1]-S[50-150/1]-Q[50-150/1]-A[0,1,2,3]-B[0,1,2,3]-C[0,1,2,3] |
SUFMF25A-4-P[40-150/1]-S[50-150/1]-Q[50-150/1]-A[0,1,2,3]-B[0,1,2,3]-C[0,1,2,3]-D[0,1,2,3] |
SUFMF25A-5-P[40-150/1]-S[50-150/1]-Q[50-150/1]-A[0,1,2,3]-B[0,1,2,3]-C[0,1,2,3]-D[0,1,2,3]-E[0,1,2,3] |
SUFMF32A-2-P[50-150/1]-S[60-150/1]-Q[60-150/1]-A[0,2,3,4]-B[0,2,3,4] |
SUFMF32A-3-P[50-150/1]-S[60-150/1]-Q[60-150/1]-A[0,2,3,4]-B[0,2,3,4]-C[0,2,3,4] |
SUFMF32A-4-P[50-150/1]-S[60-150/1]-Q[60-150/1]-A[0,2,3,4]-B[0,2,3,4]-C[0,2,3,4]-D[0,2,3,4] |
SUFMF32A-5-P[50-150/1]-S[60-150/1]-Q[60-150/1]-A[0,2,3,4]-B[0,2,3,4]-C[0,2,3,4]-D[0,2,3,4]-E[0,2,3,4] |
SUFMF40A-2-P[60-150/1]-S[70-150/1]-Q[70-150/1]-A[0,3,4,6]-B[0,3,4,6] |
SUFMF40A-3-P[60-150/1]-S[70-150/1]-Q[70-150/1]-A[0,3,4,6]-B[0,3,4,6]-C[0,3,4,6] |
SUFMF40A-4-P[60-150/1]-S[70-150/1]-Q[70-150/1]-A[0,3,4,6]-B[0,3,4,6]-C[0,3,4,6]-D[0,3,4,6] |
SUFMF40A-5-P[60-150/1]-S[70-150/1]-Q[70-150/1]-A[0,3,4,6]-B[0,3,4,6]-C[0,3,4,6]-D[0,3,4,6]-E[0,3,4,6] |
Loading...
Type | Piping Manifold | Thread Nominal | 1 |
---|
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy