(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Sponge Sheets - Urethane, Rubber
- Volume Discount
Length and width configurable in 10mm.
- METRIC
- inCAD Components
(i)Caution
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Part Number
Configured Part Number is shown.
・Materials
[ ! ]SGNW and SGNWA might discolor by aging.
* Values in ( ) are applicable to Standard Type of silicon sponge.
| Standard Type | Configurable Type | [ M ]Material | [ H ]Hardness | Color | ||
| No Adhesive | Adhesive | No Adhesive | Adhesive | |||
| SGNN | SGNS | SGNNF | SGNSF | Polyurethane Sponge | (Asker C1 or Less) | Black |
| - | - | SGNC | SGNCA | Chloroprene Rubber Sponge | Asker C25 | Black |
| - | - | SGNW | SGNWA | Chloroprene Rubber Sponge | Asker C25 | White |
| - | - | SGNP | SGNPA | EPDM Synthetic Rubber Sponge | Asker C8 | Black |
| - | - | SGNB | SGNBA | NBR Nitrile Rubber Sponge | Asker C30 | Black |
| SISP | SISA | SGNA | SGNAA | Silicon Rubber Sponge | Asker C35* (Asker C22) | Orange |
| - | - | SGNL | SGNLA | Silicon Rubber Sponge | Asker C15 | Orange |
| - | - | SGNF | SGNFA | Fluororubber Sponge | Asker C35 | Black |
* Values in ( ) are applicable to Standard Type of silicon sponge.
Specifications
■Standard Type
■Configurable Type [ ! ]A≥B
| Part Number | - | A | - | B |
| SGNN10 SISP10 | - - | 100 250 | - - | 100 100 |
| Part Number | - | A | - | B | - | T |
| SGNCA | - | 320 | - | 220 | - | 10 |
■Characteristic values of raw material rubber for rubber sponge
[ ! ]For Adhesive Type, the adhesion strength decreases under high temperature (at approx. 80°C or more).
*1 Compression Set <40% During Compression> (100°C/24h) 29%
*2 The temperature of continuous use is the temperature where long-term use does not cause a sharp decline in quality.
*3 Compression Set <40% During Compression> (150°C/24h) 8% (based on JIS K6250)
| Item | Unit | Polyurethane Sponge | Chloroprene Rubber Sponge | EPDM Synthetic Rubber Sponge | NBR Nitrile Rubber Sponge | Silicon Rubber Sponge | Fluororubber Sponge | ||
| HS35 | HS22 | HS15 | |||||||
| Apparent Density | g/cm3 | 0.022 | 0.18 | 0.13 | 0.21 | 0.35~0.37 | 0.35~0.37 | 0.3 | 0.45 |
| Air Bubble | - | Continuous | Independent | Independent | Independent | Independent | Independent | ||
| Tensile Strength | MPa {kgf/cm2} | ≥0.076 {≥0.77} | 0.9 {9} | 0.5 {5} | 0.8 {8} | 1.6~1.8 {16~18} | 0.7 {7} | 1 {10} | 2.7 {27} |
| Elongation | % | ≥120 | 170 | 200 | 200 | 200~250 | 250 | 280 | |
| 25% Compression Load | MPa {kgf/cm2} | - | 5.3x10-2 {0.54} | 3.1x10-2 {0.32} | 6.5x10-2 {0.66} | - (* 1) | - (* 3) | - (* 1) | |
| Continuous Use Temperature *2 | °C | -10~70 | -35~130 | -40~130 | -10 ~ 140 | -70 ~ 200 | -20 ~ 230 | ||
| Abrasion Resistance | ◎ | ○ | ○ | ◎ | △ | ◎ | |||
| Anti-Aging | ○ | ◎ | ◎ | ○ | ◎ | ◎ | |||
| Water Resistance | △ | ○ | ○ | ○ | ○ | ◎ | |||
| Chemical Resistance | Gasoline, Light Oil | ○ | ○ | × | ◎ | △ | ◎ | ||
| Acid | ×~△ | ○ | ×~○ | △~○ | △~○ | ◎ | |||
| Alkali | × | ◎ | ○ | ○ | ◎ | △~○ | |||
| Organic Solvent | × | ×~△ | × | ×~△ | × | ×~○ | |||
*1 Compression Set <40% During Compression> (100°C/24h) 29%
*2 The temperature of continuous use is the temperature where long-term use does not cause a sharp decline in quality.
*3 Compression Set <40% During Compression> (150°C/24h) 8% (based on JIS K6250)
■Accuracy Standards
Polyurethane Sponge
Others
■Standard Type
■Configurable Type
Polyurethane Sponge
| A, B | Tolerance |
| 390 or Less | ±2 |
| 400~790 | ±2.5 |
| 800 | ±3 |
Others
| A, B | Tolerance |
| 190 or Less | ±1.5 |
| 200~390 | ±2 |
| 400 or More | ±3 |
■Standard Type
| Part Number | T Tolerance | A | B | |
| Type | T | |||
| SGNN SGNS | 10 | ±1 | 100 200 500 | 100 400 800 |
| 30 | ±2 | |||
| 50 | ±3 | |||
| SISP SISA | 3 | ±0.5 | 100 250 | 100 |
| 5 | ±1 | |||
| 10 | ||||
| Part Number | 10mm Increment | T | T Tolerance | |
| A | B | |||
| SGNC SGNW SGNP SGNB SGNCA SGNWA SGNPA SGNBA | 20~500 | 20~500 | 3 5 | ±0.5 |
| 8 10 15 20 25 | ±1 | |||
| 30 | ±1.5 | |||
| SGNA SGNL SGNF SGNAA SGNLA SGNFA | 20~500 | 20~500 | 2 3 5 | ±0.5 |
| 10 | ±1.5 | |||
| SGNNF SGNSF | 10~500 | 10~500 | 10 | ±1 |
| 30 | ±2 | |||
| 50 | ±3 | |||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| SGNA-[20-500/10]-[20-500/10]-[2,3,5,10] |
| SGNB-[20-500/10]-[20-500/10]-[3,5,8,10,15,20,25,30] |
| SGNC-[20-500/10]-[20-500/10]-[3,5,8,10,15,20,25,30] |
| SGNF-[20-500/10]-[20-500/10]-[2,3,5,10] |
| SGNL-[20-500/10]-[20-500/10]-[2,3,5,10] |
| SGNN10-[100,200,500]-[100,400,800] |
| SGNN30-[100,200,500]-[100,400,800] |
| SGNN50-[100,200,500]-[100,400,800] |
| SGNNF-[10-500/10]-[10-500/10]-[10,30,50] |
| SGNP-[20-500/10]-[20-500/10]-[3,5,8,10,15,20,25,30] |
| SGNW-[20-500/10]-[20-500/10]-[3,5,8,10,15,20,25,30] |
| SISP3-100-100 |
| SISP3-250-100 |
| SISP5-100-100 |
| SISP5-250-100 |
| SISP10-100-100 |
| SISP10-250-100 |
Loading...
Basic Information
| Material, General | Sponge | Hole Machining | No Drilling Alteration |
|---|
Specification/Dimensions
-
Thickness T(mm)
-
Width A(mm)
-
Length B(mm)
-
Material, Details
- Nitrile Rubber (NBR Nitrile Rubber )
- Chloroprene Rubber (CR)
- Ethylene Rubber (EPDM Synthetic Rubber)
- Silicon Rubber (SI)
- Fluororubber (FPM)
- Urethane Sponge
- Nitrile Rubber (NBR Nitrile Rubber )
-
Hardness (Shore, Asker, Penetration)
-
Color
- Black
- Orange
- White
-
Specifications
-
type
- SGNA
- SGNAA
- SGNB
- SGNBA
- SGNC
- SGNCA
- SGNF
- SGNFA
- SGNL
- SGNLA
- SGNN
- SGNNF
- SGNP
- SGNPA
- SGNS
- SGNSF
- SGNW
- SGNWA
- SISA
- SISP
-
Adhesive Tape
- With Adhesive Tape
- W/o Adhesive Tape
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Rubber Sheets - Silicone Gel, Anti-Skid
- CR Absorbent Rubber Pad (with or without Tape)
- Neoprene Foam Sheet -
- Firm Neoprene Foam Roll -
- Polyurethane Roll - 60A Durometer
- High Strength Rubber Strip - Neoprene
- High Strength Rubber Strip - SBR
- Foam Sheet, Strip, Roll - EVA
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy