(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Miniature Linear Guides - Resistant to high temperatures.

Miniature Linear Guides - Resistant to high temperatures.

Standard block stainless steel miniature linear guides. Designed with high temperature resistance parts and grease, applicable for environment up to 150°C. Blocks and rails cannot be purchased separately.

  • inCAD Components

(i)Caution

  • The appearance of this product has changed as of September 2017.
    About Misumi Linear Guide Exterior Change
  • Delivery times for some of our products may be delayed as national government authorities have imposed limit of capacity at our production sites.

PDFP.2019-640

Unit examples related to this product
Miniature Linear Guides - Heat Resistant Type:Related Image

[ ! ]For L Configurable, G dimensions differ from those shown in the table below. For details, Click here.

・Materials
[ M ]Material
[ H ]Hardness
TypeL DimensionNumber of Blocks
Light Preload
High Grade
ShortStandardLong
Stainless Steel
56HRC~
SSEBSTSSEBTSSELBTSelectable1
SSE2BSTSSE2BTSSEL2BT2
SSEBSLTSSEBLTSSELBLTConfigurable1
SSE2BSLTSSE2BLTSSEL2BLT2
Heat Resistant Temperature: -20 ~ 150°C
 

Specifications

Miniature Linear Guides - Heat Resistant Type:Related Image

[ ! ]For L Configurable, G dimensions differ from those shown in the table below. For details, Click here.
Part NumberLBlock TypeBlock DimensionGuide Rail Dimension
TypeHWL1BCSxℓL2KCbH1W1W2CaCounterbored HoleFG
d1xd2xh
[ ! ]Dimensions in ( ) are for 2-Block Type.Short
(1 block)
SSEBST
SSEBSLT

Standard
(1 block)
SSEBT
SSEBLT

Long
(1 block)
SSELBT
SSELBLT

(2 blocks)
SSE2BST
SSE2BSLT



(2 blocks)
SSE2BT
SSE2BLT


(2 blocks)
SSEL2BT
SSEL2BLT
840~130
(70)
Short1719.612-M2x2.59.66.50.34.7750.32.4x4.2x2.3155
Standard23.6813.6
Long321322
1035~275
(95)
Short2022.915-M3x311.97.80.35.595.50.33.5x6x3.5207.5
Standard301019
55~275
(95)
Long401629
1345~470
(120)
Short272720-M3x3.513100.57.5127.50.53.5x6x4.52510
Standard33.91519.9
70~470
(120)
Long45.82031.8
1670~670
(150)
Short3232.725-M3x417.7120.59.5158.50.53.5x6x4.54015
Standard42.42027.4
110~670
(150)
Long58.32543.3

Materials

[ M ]Material
[ H ]Hardness
TypeL DimensionNumber of Blocks
Light Preload
High Grade
ShortStandardLong
Stainless Steel
56HRC min.
SSEBSTSSEBTSSELBTSelectable1
SSE2BSTSSE2BTSSEL2BT2
SSEBSLTSSEBLTSSELBLTConfigurable1
SSE2BSLTSSE2BLTSSEL2BLT2
Heat Resistant Temperature: -20 ~ 150°C
 
Part Number-L
SSEBT10-195
 
■Precautions for Use
[ ! ]Blocks are equipped with retainers (wire) to prevent balls from falling out.
For proper block handling, Click here.
[ ! ]Radial clearances and accuracies are not guaranteed if the blocks and rails are interchanged from the original set combinations.
[ ! ]Straight grooves are provided on datum planes. When using, be sure to match the datum lines..
[ ! ]Rails cannot be connected end to end.
[ ! ]The accuracy of Linear Guides is guaranteed after mounting the rail (fastening screws on the rail and pushing it onto the datum plane). Minor bending of the rail will be adjusted after being mounted and will not affect the performance.
■Accessories
· H8 comes with cap screws (M2x6).

■Others
· Filled with heat resistant grease (Du Pont KRYTOX GPL225).
· Stainless steel and fluoro-rubber are used for return caps and seals respectively.
· For operating life calculations please Click here, or by using our free software at, http://www.misumiusa.com/lg-bs_software/

Price list

HLUnit Price
ShortStandardLong
SSEBSTSSE2BSTSSEBTSSE2BTSSELBTSSEL2BT
840 - - -
55 - - -
70      
85      
100      
115      
130      
1035 - ---
55 - - -
75 - - -
95      
115      
135      
155      
175      
195      
215      
235      
255      
275      
1345 - ---
70 - - -
95 - - -
120      
145      
170      
195      
220      
245      
270      
295      
320      
345      
370      
395      
420      
445      
470      
1670 - ---
110 - - -
150      
190      
230      
270      
310      
350      
390      
430      
470      
510      
550      
590      
630      
670      

■L Dimension Configurable Type (1mm Increment)
HUnit Price
ShortStandardLong
SSEBSLTSSE2BSLTSSEBLTSSE2BLTSSELBLTSSEL2BLT
8      
10      
13      
16      
[ ! ]For calculation of L Dimension Configurable Type pricing, please use the Misumi website. http://www.misumiusa.com/lg-bs_software/

■Additional Block Price
HBlockB3:
Price Adder
B4:
Price Adder
8Short  
Standard  
Long--
10Short  
Standard  
Long  
13Short  
Standard  
Long  
16Short  
Standard  
Long  

Alterations

Miniature Linear Guides - Heat Resistant Type:Related Image

Technical Information

Characteristics of Linear Guides

  • Linear guides utilize steel balls that roll on ground raceways, and the balls are recirculated using plastic return caps.
  • End seals prevent foreign materials from entering into the blocks.
  • Load ratings are the same for all four directions (radial, reverse-radial, and lateral directions). Can be used in any orientation.

Preload (Radial Clearance)

Type of guidePreloadHeight H
Dimension
Radial Clearance
(µm)
Miniature Linear GuideLight Preload6 ~ 20-3 ~ 0
Slight Clearance0 ~ 15
  • Clearance and preload of MISUMI Linear Guides are controlled with minute ball size adjustments.
  • Increased rigidity and reduced elastic deformation will result by preloading (negative clearance).
  • In general, selecting some preloads would have a positive effect on the accuracy and service life of the Linear Guides.
  • Blocks and rails manufactured by MIUSMI guarantee their own radial clearance (preload) and accuracy as sets of blocks and rails. Be sure to use the blocks and rails in sets.

Technical Information

Types of Greases

The following types of greases are used in MISUMI linear guides.

GreaseLinear GuideGrease ModelFeatures
StandardMiniatureMultemp Grease PS2 (Manufactured by Kyodo Yushi)Grease with excellent low temperature and low torque properties.
Miniature with MX lubrication unitTufflix MP2 (Manufactured by JX Nippon Oil & Energy)Reduces temperature rise in the bearing area; extends bearing life and reduces grease replenishment interval and maintenance work.
Medium Load
Heavy Load
Albania Grease S2 (Manufactured by Showa Shell Sekiyu)It has excellent lubrication and shows excellent performance under normal and heavy load conditions.
Type LMiniature/Medium/Heavy LoadET-100K (Manufactured by Kyodo Yushi)It has excellent heat resistance, oxidation stability, adhesion and tackiness.
It is also a low dispersion, low leakage grease.
Type GLG2 (Manufactured by NSK Ltd.)It produces little dust and has excellent wear resistance and rust resistance properties.

Maintenance

The grease forms an oil film on the steel balls and on the slideways of the linear guide, reducing friction.

Loss and deterioration of the grease will greatly affect the service life of the linear guide, so it must be lubricated on time depending on the conditions of use.

MISUMI linear guides are lubricated with standard grease at the time of shipment, so they can be used as is.

Recommended lubrication intervals

Lubricate every 6 months. If linear guide is used for long distances, it is recommended to lubricate every 3 months, or if it is used more than 1000 km in a period, we recommend every 1000 km.

*The above is the distance-based lubrication interval. If the grease deteriorates or is heavily contaminated due to the operating environment, it may be necessary to shorten the lubrication interval.

By using a lubrication unit, it is possible to extend the lubrication interval considerably.

Permissible loads

HBlock typeBasic Load RatingAllowable Static MomentMass
C (Dynamic)
kN
Co (Static)
kN
MA
N・m
MB
N・m
MC
N・m
Block
kg
Guide Rails
kg/m
8Short0.791.271.91.64.60.0080.19
Standard0.91.54.14.15.20.01
Long1.62.47.57.590.02
10Short1.161.683.12.67.90.0150.31
Standard1.52.55.15.110.20.02
Long2.23.712.312.3130.03
13Short1.632.385.24.414.80.0250.61
Standard2.23.38.89.516.10.04
Long3.55.324.526.432.30.06
16Short3.084.2312.310.332.60.051.02
Standard3.65.421.623.439.60.06
Long5.88.757.862.667.60.1

kgf = N ・ 0.101972

kgf = kilograms force, N = Newton

Support Information

Shelf Life Information

For more information about the calculation of useful life, click here.

Mounting Hole Information

For more information about mounting holes and G-value, click here.

Installation Information

For more information about the installation click here.

Cautions

If the linear guides are handled incorrectly, the quality may deteriorate. When using MISUMI linear guides, consider the following points:

Be careful when removing the blocks

MISUMI linear guidesare equipped with a retainer, so that the balls will not fall out even if the block is removed from the rail. However, if the block is removed from the rail at high speed or inserted at an angle, the balls may fall out. Be careful when removing and installing the blocks.

Blocks and rails not sold separately

Linear guides MISUMI are only sold as a block and rail assembly. For resin retainer type only, blocks and rails can be purchased separately.

Please do not replace with another product

The radial clearance and accuracy of MISUMI linear guides are guaranteed as a block and rail assembly, so the accuracy is not guaranteed when combined with another product.

Please check the reference surface before installation.

Linear guides have reference planes on both the rail and the block (the side with a straight groove is provided). When installing the linear guide, correctly align this reference surface with the mounting reference surface of the table and base and secure it. For more details, refer to"Installation" in "Support Information".

Please do not add rails

MISUMI linear guides are shipped with chamfered edges on the end of the rail. The use of additional rails is not covered under warranty.

Secure all rail mounting holes.

The rail curvature is corrected with all mounting holes clamped. Accuracy is guaranteed under these conditions.

Technical Information

Characteristics of Linear Guides

  • Linear guides utilize steel balls that roll on ground raceways, and the balls are recirculated using plastic return caps.
  • End seals prevent foreign materials from entering into the blocks.
  • Load ratings are the same for all four directions (radial, reverse-radial, and lateral directions). Can be used in any orientation.

Preload (Radial Clearance)

Type of guidePreloadHeight H
Dimension
Radial Clearance
(µm)
Miniature Linear GuideLight Preload6 ~ 20-3 ~ 0
Slight Clearance0 ~ 15
  • Clearance and preload of MISUMI Linear Guides are controlled with minute ball size adjustments.
  • Increased rigidity and reduced elastic deformation will result by preloading (negative clearance).
  • In general, selecting some preloads would have a positive effect on the accuracy and service life of the Linear Guides.
  • Blocks and rails manufactured by MIUSMI guarantee their own radial clearance (preload) and accuracy as sets of blocks and rails. Be sure to use the blocks and rails in sets.

Types of Greases

The following types of greases are used in MISUMI linear guides.

GreaseLinear GuideGrease ModelFeatures
StandardMiniatureMultemp Grease PS2 (Manufactured by Kyodo Yushi)Grease with excellent low temperature and low torque properties.
Miniature with MX lubrication unitTufflix MP2 (Manufactured by JX Nippon Oil & Energy)Reduces temperature rise in the bearing area; extends bearing life and reduces grease replenishment interval and maintenance work.
Medium Load
Heavy Load
Albania Grease S2 (Manufactured by Showa Shell Sekiyu)It has excellent lubrication and shows excellent performance under normal and heavy load conditions.
Type LMiniature/Medium/Heavy LoadET-100K (Manufactured by Kyodo Yushi)It has excellent heat resistance, oxidation stability, adhesion and tackiness.
It is also a low dispersion, low leakage grease.
Type GLG2 (Manufactured by NSK Ltd.)It produces little dust and has excellent wear resistance and rust resistance properties.

Maintenance

The grease forms an oil film on the steel balls and on the slideways of the linear guide, reducing friction.

Loss and deterioration of the grease will greatly affect the service life of the linear guide, so it must be lubricated on time depending on the conditions of use.

MISUMI linear guides are lubricated with standard grease at the time of shipment, so they can be used as is.

Recommended lubrication intervals

Lubricate every 6 months. If linear guide is used for long distances, it is recommended to lubricate every 3 months, or if it is used more than 1000 km in a period, we recommend every 1000 km.

*The above is the distance-based lubrication interval. If the grease deteriorates or is heavily contaminated due to the operating environment, it may be necessary to shorten the lubrication interval.

By using a lubrication unit, it is possible to extend the lubrication interval considerably.

Permissible loads

HBlock typeBasic Load RatingAllowable Static MomentMass
C (Dynamic)
kN
Co (Static)
kN
MA
N・m
MB
N・m
MC
N・m
Block
kg
Guide Rails
kg/m
8Short0.791.271.91.64.60.0080.19
Standard0.91.54.14.15.20.01
Long1.62.47.57.590.02
10Short1.161.683.12.67.90.0150.31
Standard1.52.55.15.110.20.02
Long2.23.712.312.3130.03
13Short1.632.385.24.414.80.0250.61
Standard2.23.38.89.516.10.04
Long3.55.324.526.432.30.06
16Short3.084.2312.310.332.60.051.02
Standard3.65.421.623.439.60.06
Long5.88.757.862.667.60.1

kgf = N ・ 0.101972

kgf = kilograms force, N = Newton

Support Information

Shelf Life Information

For more information about the calculation of useful life, click here.

Mounting Hole Information

For more information about mounting holes and G-value, click here.

Installation Information

For more information about the installation click here.

Cautions

If the linear guides are handled incorrectly, the quality may deteriorate. When using MISUMI linear guides, consider the following points:

Be careful when removing the blocks

MISUMI linear guidesare equipped with a retainer, so that the balls will not fall out even if the block is removed from the rail. However, if the block is removed from the rail at high speed or inserted at an angle, the balls may fall out. Be careful when removing and installing the blocks.

Blocks and rails not sold separately

Linear guides MISUMI are only sold as a block and rail assembly. For resin retainer type only, blocks and rails can be purchased separately.

Please do not replace with another product

The radial clearance and accuracy of MISUMI linear guides are guaranteed as a block and rail assembly, so the accuracy is not guaranteed when combined with another product.

Please check the reference surface before installation.

Linear guides have reference planes on both the rail and the block (the side with a straight groove is provided). When installing the linear guide, correctly align this reference surface with the mounting reference surface of the table and base and secure it. For more details, refer to"Installation" in "Support Information".

Please do not add rails

MISUMI linear guides are shipped with chamfered edges on the end of the rail. The use of additional rails is not covered under warranty.

Secure all rail mounting holes.

The rail curvature is corrected with all mounting holes clamped. Accuracy is guaranteed under these conditions.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
SSE2BLT8-[71-129/1]
SSE2BLT10-[96-274/1]
SSE2BLT13-[121-469/1]
SSE2BLT16-[151-669/1]
SSE2BSLT8-[71-129/1]
SSE2BSLT10-[96-274/1]
SSE2BSLT13-[121-469/1]
SSE2BSLT16-[151-669/1]
SSE2BST8-[70,​85,​100,​115,​130]
SSE2BST10-[95,​115,​135,​155,​175,​195,​215,​235,​255,​275]
SSE2BST13-[120,​145,​170,​195,​220,​245,​270,​295,​320,​345,​370,​395,​420,​445,​470]
SSE2BST16-[150,​190,​230,​270,​310,​350,​390,​430,​470,​510,​550,​590,​630,​670]
SSE2BT8-[70,​85,​100,​115,​130]
SSE2BT10-[95,​115,​135,​155,​175,​195,​215,​235,​255,​275]
SSE2BT13-[120,​145,​170,​195,​220,​245,​270,​295,​320,​345,​370,​395,​420,​445,​470]
SSE2BT16-[150,​190,​230,​270,​310,​350,​390,​430,​470,​510,​550,​590,​630,​670]
SSEBLT8-[41-129/1]
SSEBLT10-[36-274/1]
SSEBLT13-[46-469/1]
SSEBLT16-[71-669/1]
SSEBSLT8-[41-129/1]
SSEBSLT10-[36-274/1]
SSEBSLT13-[46-469/1]
SSEBSLT16-[71-669/1]
SSEBST8-[40,​55,​70,​85,​100,​115,​130]
SSEBST10-[35,​55,​75,​95,​115,​135,​155,​175,​195,​215,​235,​255,​275]
SSEBST13-[45,​70,​95,​120,​145,​170,​195,​220,​245,​270,​295,​320,​345,​370,​395,​420,​445,​470]
SSEBST16-[70,​110,​150,​190,​230,​270,​310,​350,​390,​430,​470,​510,​550,​590,​630,​670]
SSEBT8-[40,​55,​70,​85,​100,​115,​130]
SSEBT10-[35,​55,​75,​95,​115,​135,​155,​175,​195,​215,​235,​255,​275]
SSEBT13-[45,​70,​95,​120,​145,​170,​195,​220,​245,​270,​295,​320,​345,​370,​395,​420,​445,​470]
SSEBT16-[70,​110,​150,​190,​230,​270,​310,​350,​390,​430,​470,​510,​550,​590,​630,​670]
SSEL2BLT8-[71-129/1]
SSEL2BLT10-[96-274/1]
SSEL2BLT13-[121-469/1]
SSEL2BLT16-[151-669/1]
SSEL2BT8-[70,​85,​100,​115,​130]
SSEL2BT10-[95,​115,​135,​155,​175,​195,​215,​235,​255,​275]
SSEL2BT13-[120,​145,​170,​195,​220,​245,​270,​295,​320,​345,​370,​395,​420,​445,​470]
SSEL2BT16-[150,​190,​230,​270,​310,​350,​390,​430,​470,​510,​550,​590,​630,​670]
SSELBLT8-[41-129/1]
SSELBLT10-[56-274/1]
SSELBLT13-[71-469/1]
SSELBLT16-[111-669/1]
SSELBT8-[40,​55,​70,​85,​100,​115,​130]
SSELBT10-[55,​75,​95,​115,​135,​155,​175,​195,​215,​235,​255,​275]
SSELBT13-[70,​95,​120,​145,​170,​195,​220,​245,​270,​295,​320,​345,​370,​395,​420,​445,​470]
SSELBT16-[110,​150,​190,​230,​270,​310,​350,​390,​430,​470,​510,​550,​590,​630,​670]
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSBlock Type Rail Width W1
(mm)
Unit Height H
(mm)
No. of Blocks Rail Length L
(mm)
Nominal Part Number Basic Load Rating: Dynamic Load
(N)
Basic Load Rating: Static Load
(N)
Allowable Static Moment MA
(N⋅m)
Allowable Static Moment MB
(N⋅m)
Allowable Static Moment MC
(N⋅m)
L Dimension Type
1 Piece(s)

12 Days or more

10[Standard] Standard Block78271 ~ 129790015004.14.15.2Configurable Type
1 Piece(s)

12 Days or more

10[Standard] Standard Block910296 ~ 2749150025005.15.110.2Configurable Type
1 Piece(s)

12 Days or more

10[Standard] Standard Block12132121 ~ 46912220033008.89.516.1Configurable Type
1 Piece(s)

12 Days or more

10[Standard] Standard Block15162151 ~ 669153600540021.623.439.6Configurable Type
1 Piece(s)

12 Days or more

10[Short] Short Block78271 ~ 129778012701.91.64.6Configurable Type
1 Piece(s)

12 Days or more

10[Short] Short Block910296 ~ 2749116016803.12.67.9Configurable Type
1 Piece(s)

12 Days or more

10[Short] Short Block12132121 ~ 46912163023805.24.414.8Configurable Type
1 Piece(s)

12 Days or more

10[Short] Short Block15162151 ~ 669153080423012.310.332.6Configurable Type
1 Piece(s)

12 Days or more

10[Short] Short Block78270 ~ 130778012701.91.64.6Standard Type
1 Piece(s)

12 Days or more

10[Short] Short Block910295 ~ 2759116016803.12.67.9Standard Type
1 Piece(s)

12 Days or more

10[Short] Short Block12132120 ~ 47012163023805.24.414.8Standard Type
1 Piece(s)

12 Days or more

10[Short] Short Block15162150 ~ 670153080423012.310.332.6Standard Type
1 Piece(s)

12 Days or more

10[Standard] Standard Block78270 ~ 130790015004.14.15.2Standard Type
1 Piece(s)

12 Days or more

10[Standard] Standard Block910295 ~ 2759150025005.15.110.2Standard Type
1 Piece(s)

12 Days or more

10[Standard] Standard Block12132120 ~ 47012220033008.89.516.1Standard Type
1 Piece(s)

12 Days or more

10[Standard] Standard Block15162150 ~ 670153600540021.623.439.6Standard Type
1 Piece(s)

12 Days or more

10[Standard] Standard Block78141 ~ 129790015004.14.15.2Configurable Type
1 Piece(s)

12 Days or more

10[Standard] Standard Block910136 ~ 2749150025005.15.110.2Configurable Type
1 Piece(s)

12 Days or more

10[Standard] Standard Block1213146 ~ 46912220033008.89.516.1Configurable Type
1 Piece(s)

12 Days or more

10[Standard] Standard Block1516171 ~ 669153600540021.623.439.6Configurable Type
1 Piece(s)

12 Days or more

10[Short] Short Block78141 ~ 129778012701.91.64.6Configurable Type
1 Piece(s)

12 Days or more

10[Short] Short Block910136 ~ 2749116016803.12.67.9Configurable Type
1 Piece(s)

12 Days or more

10[Short] Short Block1213146 ~ 46912163023805.24.414.8Configurable Type
1 Piece(s)

12 Days or more

10[Short] Short Block1516171 ~ 669153080423012.310.332.6Configurable Type
1 Piece(s)

12 Days or more

10[Short] Short Block78140 ~ 130778012701.91.64.6Standard Type
1 Piece(s)

12 Days or more

10[Short] Short Block910135 ~ 2759116016803.12.67.9Standard Type
1 Piece(s)

12 Days or more

10[Short] Short Block1213145 ~ 47012163023805.24.414.8Standard Type
1 Piece(s)

12 Days or more

10[Short] Short Block1516170 ~ 670153080423012.310.332.6Standard Type
1 Piece(s)

12 Days or more

10[Standard] Standard Block78140 ~ 130790015004.14.15.2Standard Type
1 Piece(s)

12 Days or more

10[Standard] Standard Block910135 ~ 2759150025005.15.110.2Standard Type
1 Piece(s)

12 Days or more

10[Standard] Standard Block1213145 ~ 47012220033008.89.516.1Standard Type
1 Piece(s)

12 Days or more

10[Standard] Standard Block1516170 ~ 670153600540021.623.439.6Standard Type
1 Piece(s)

12 Days or more

10[Long] Long Block78271 ~ 1297160024007.57.59Configurable Type
1 Piece(s)

12 Days or more

10[Long] Long Block910296 ~ 27492200370012.312.313Configurable Type
1 Piece(s)

12 Days or more

10[Long] Long Block12132121 ~ 469123500530024.526.432.3Configurable Type
1 Piece(s)

12 Days or more

10[Long] Long Block15162151 ~ 669155800870057.862.667.6Configurable Type
1 Piece(s)

12 Days or more

10[Long] Long Block78270 ~ 1307160024007.57.59Standard Type
1 Piece(s)

12 Days or more

10[Long] Long Block910295 ~ 2759150025005.15.110.2Standard Type
1 Piece(s)

12 Days or more

10[Long] Long Block12132120 ~ 470123500530024.526.432.3Standard Type
1 Piece(s)

12 Days or more

10[Long] Long Block15162150 ~ 670155800870057.862.667.6Standard Type
1 Piece(s)

12 Days or more

10[Long] Long Block78141 ~ 1297160024007.57.59Configurable Type
1 Piece(s)

12 Days or more

10[Long] Long Block910156 ~ 27492200370012.312.313Configurable Type
1 Piece(s)

12 Days or more

10[Long] Long Block1213171 ~ 469123500530024.526.432.3Configurable Type
1 Piece(s)

12 Days or more

10[Long] Long Block15161111 ~ 669155800870057.862.667.6Configurable Type
1 Piece(s)

12 Days or more

10[Long] Long Block78140 ~ 1307160024007.57.59Standard Type
1 Piece(s)

12 Days or more

10[Long] Long Block910155 ~ 27592200370012.312.313Standard Type
1 Piece(s)

12 Days or more

10[Long] Long Block1213170 ~ 470123500530024.526.432.3Standard Type
1 Piece(s)

12 Days or more

10[Long] Long Block15161110 ~ 670155800870057.862.667.6Standard Type

Loading...

  1. 1
 

Basic Information

Set / Single Item Set Rail Type Standard Material Stainless Steel
Preload Light Preload Accuracy High Grade Ball Arrangement Miniature Type
Retainer N/A Rolling Element Ball Lubrication Type Lithium Base Grease (Standard)

Frequently asked questions (FAQ)

質問: Are the block's ball bearings retained?
回答: Yes, all ball bearings are retained on Misumi linear guides.
質問: What is the seal material of you miniature linear guides?
回答: Nitrile Rubber (NBR).

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.