(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Cam Followers & Roller Followers（Thread Size on Cam Follower (M)：M12）
Category
-
Cam Followers -
Roller Follower -
Bracket for Cam Follower -
Roller Follower Pin
-
- On Sale Till 15/12/2024
THK
It is compact and rigid shaft bearing with a needle bearing in the cam follower. Ideal for use as a linear motion guide roller in the cam mechanism of automatic and specialty machines
· [Type and features]
· CF-AB model comes with hex holes at both ends of the stud and grease nipple for lubriction at the rear. Can be installed and refilled from both directions.- Volume Discount
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Cam Followers - CF-SFU Series.
THK
Type in which the uprights are staggered and can be fastened with screws to simplify installation. Ideal for equipment that does not have space for stud attachment. Type CF-SFU is only available with adhesive. The CF-SFU model is equipped with UU seals even when no UU symbol is used.
- Volume Discount
Special Price Days to Ship: Same day or more Show Stock Products
-
Cam Followers - Straight groove, flat.
MISUMI
The outer diameter of the cam follower is flat. They can be configured for a general application or for an application where low particle emission is required (clean room). Available in 52100 bearing steel or 440C stainless steel. Cylindrical outer ring type roller. Roller guiding method: retainer type. Options with or without seals.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more Show Stock Products
-
- New Products
Cam Followers - Hexagon socket for head and shank, flat.
MISUMI
Hex socket and grease fittings are mounted on both the head and thread part. They can be secured from either head or thread side. Greasing is enabled from both directions.
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Cam Followers with Bracket - L-shaped, crowned or flat bracket.
MISUMI
The cam follower can be configured as flat or crowned as required by the application. Cam follower material available in 52100 bearing steel or 440C stainless steel, bracket material available in carbon steel or stainless steel. Cam follower center height can be configured from 17 to 64mm in 1mm intervals.
- inCAD Components
Days to Ship: 10 Days or more -
Days to Ship: 12 Days or more -
Cam Followers with Bracket - Block, crowned or flat bracket.
MISUMI
The cam follower can be configured as flat or crowned as required by the application. Cam follower material available in 52100 bearing steel or 440C stainless steel, bracket material available in carbon steel or stainless steel. Cam follower center height can be configured from 12 to 40mm in 1mm intervals.
- inCAD Components
Days to Ship: 10 Days or more -
Eccentric Roller Followers - Hexagonal keyway, crowned.
MISUMI
Crowned cam followers are used to keep the load evenly distributed if it is deflected or if there is any misalignment between the follower and the tracked surface. Since the stem is eccentric to the center of the cam follower, it is possible to fine tune the position by rotating the stem during assembly. Roller follower material available in 52100 bearing steel. Options with or without seals. Maximum operating temperatures of 80°C.
- Volume Discount
- Spec Change
- Price Reduction
- inCAD Components
Days to Ship: 8 Days or more -
- On Sale Till 15/12/2024
THK
Cam follower with stud head and screw section normally used for tap pipe processing.
- Volume Discount
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Cam Followers - Straight slot, crowned.
MISUMI
They can be configured for a general application or for an application where low particulate emission is required (clean room). Options with or without seals. Outer diameters selectable in sizes from 13 to 35mm. Available in 52100 bearing steel or 440C stainless steel. Crowned type roller. Roller guiding method: retainer type.
- Volume Discount
- inCAD Components
Special Price Days to Ship: 8 Days or more Show Stock Products
-
- On Sale Till 15/12/2024
Cam Followers - Head with hexagon wrench socket, crowned.
MISUMI
Configurable carbon steel or stainless steel nuts. Options with or without seals. Configurations available for general, high load or low particulate applications. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C.
- Volume Discount
- inCAD Components
Special Price Days to Ship: 8 Days or more Show Stock Products
-
Cam Followers - Threaded for grease fittings, flat.
MISUMI
The outer diameter of the cam follower is flat. The thread for the grease fitting can be M6 or BSPT 1/8. The material is 52100 bearing steel. The outer diameter is crowned and can be configured in sizes from 16 to 52mm. The nut to secure it is carbon steel. The grease fitting can be included, configured by alterations.
- Volume Discount
- Lead Time Reduction
- inCAD Components
Days to Ship: 8 Days or more -
Supports for Cam Follower - L Shape.
MISUMI
•Category: Cam Followers
For complete product overview and details on L-Shaped Brackets for Cam Followers see the sections below:- inCAD Components
Days to Ship: 10 Days or more -
Eccentric Cam Followers - For hex wrench, crowned.
MISUMI
Crowned cam followers are used to keep the load evenly distributed if it is deflected or if there is any misalignment between the follower and the tracked surface. Since the stem is eccentric to the center of the cam follower, it is possible to fine adjust the position by turning the stem during assembly. Available in 52100 bearing steel. Options with or without seals. Maximum operating temperatures of 80°C.
- Volume Discount
- Spec Change
- Price Reduction
- inCAD Components
Days to Ship: 8 Days or more -
Cam Followers - CFH-AB Series.
THK
The cam follower is a compact and highly rigid shaft bearing with a needle bearing built in.Ideal as a cam mechanism for automatic machines and dedicated machines, and as a guide roller for linear motion.[Types and features]-The CFH-AB type is a cam follower whose position can be easily finely adjusted by turning the stud because the stud mounting shaft and stud head are eccentric by 0.25 mm to 1.0 mm.-For this reason, machining and assembly man-hours can be significantly reduced, such as alignment with the cam groove and precision machining of the mounting hole position.・ CFH-AB type …… With grease nipple and hexagonal hole. Corresponding stud diameter [mm] is 12 to 30.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Cam Followers - Threaded for grease fittings, crowned.
MISUMI
Tapped holes for grease fittings are provided. Installation is simple.
- Volume Discount
- Lead Time Reduction
- inCAD Components
Days to Ship: 8 Days or more -
Followers of Leva - Resin, crowned.
MISUMI
MC Nylon Resin is press-fit into the outer ring of Cam Follower - With Hex Socket.
- Volume Discount
- Spec Change
- inCAD Components
Days to Ship: 8 Days or more -
Cam Followers - Resin, with retainer.
MISUMI
After MC Nylon Resin is press-fit into the outer ring of Cam Follower - Hex Socket, the sleeve is retained by retaining ring.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Supports for Cam Follower - Block.
MISUMI
•Category: Cam Followers
For complete product overview and details on Block Brackets for Cam Followers see the sections below:- inCAD Components
Days to Ship: 10 Days or more -
- New Products
Cam Followers - Hexagon socket wrench head and shank, crowned.
MISUMI
Hex socket and grease fittings are mounted on both the head and thread part. They can be secured from either head or thread side. Greasing is enabled from both directions.
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
MISUMI
MC Nylon Resin is press-fit into the outer ring of Cam Follower - With Hex Socket.
- Volume Discount
- Spec Change
- inCAD Components
Days to Ship: 8 Days or more Show Stock Products
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Category |
| Roller Type |
| Roller O.D. D(Ø) |
| Roller Width B(mm) |
| Roller Follower ID(mm) |
| Thread Size on Cam Follower (M)(mm) |
| Tightening Method |
| Cam Follower: Stud Screw (Fine Thread)(mm) |
| Material |
| Roller Lining |
| Cam Follower Type |
| Roller Follower Type |
| Shaft |
| Unit |
| Roller Guiding Method |
| Inner Ring |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | THK | THK | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | THK | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | THK | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Cam Followers with Bracket - L-shaped, crowned or flat bracket. | Cam Followers with Bracket - Block, crowned or flat bracket. | Cam Followers - Hexagon socket wrench head and shank, crowned. | ||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
8 Days or more
Show Stock Products |
Same day or more
Show Stock Products | 10 Days or more | 12 Days or more | 10 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
8 Days or more
Show Stock Products |
8 Days or more
Show Stock Products | 8 Days or more | 10 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more |
Same day or more
Show Stock Products |
8 Days or more
Show Stock Products |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| Category | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Bracket for Cam Follower | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers |
| Roller Type | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | - | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | - | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | - | Spherical Outer Ring | Cylindrical Outer Ring |
| Roller O.D. D(Ø) | 30 ～ 32 | 30 ～ 32 | 30 | 30 ～ 32 | - | - | - | 30 ～ 32 | 30 ～ 32 | 30 ～ 32 | 32 | 30 ～ 32 | - | 30 ～ 32 | 30 ～ 32 | 30 ～ 32 | 30 ～ 32 | 30 ～ 32 | - | 30 ～ 32 | 30 ～ 32 |
| Roller Width B(mm) | 14 | 14 | 14 | 14 | - | - | - | 14 | 14 | 14 | 14 | 14 | - | 14 | 14 | 14 | 14 | 21 | - | 14 | 14 |
| Roller Follower ID(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Size on Cam Follower (M)(mm) | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 | M12 |
| Tightening Method | Hex Socket on Head, Thread Side | Hex Socket on Head | With Driver Groove | Hex Socket on Head, Thread Side | - | - | - | Hex Socket on Head, Thread Side | With Driver Groove | With Driver Groove | Hex Socket on Head | With Driver Groove | - | Hex Socket on Head, Thread Side | - | With Driver Groove | Hex Socket on Head, Thread Side | Hex Socket on Head, Thread Side | - | Hex Socket on Head, Thread Side | Hex Socket on Head, Thread Side |
| Cam Follower: Stud Screw (Fine Thread)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Carbon Steel / Stainless Steel | Carbon Steel | Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | - | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Stainless Steel | Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel |
| Roller Lining | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | With Resin | With Resin | None | None | With Resin |
| Cam Follower Type | Standard | Standard | Standard | Standard | Standard | - | Standard | Eccentric | Standard | Standard | Standard | - | - | Eccentric | Eccentric | - | - | - | - | Standard | - |
| Roller Follower Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shaft | Provided | Provided | Provided | Provided | Provided | None | Provided | Provided | Provided | Provided | Provided | Provided | None | Provided | Provided | Provided | Provided | Provided | None | Provided | Provided |
| Unit | Metric Series | Metric Series | Metric Series | Metric Series | - | - | - | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | - | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | - | Metric Series | Metric Series |
| Roller Guiding Method | Retainer Type / Full Roller Type | Retainer Type | Retainer Type | Retainer Type / Full Roller Type | - | - | - | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | - | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | - | Retainer Type / Full Roller Type | Retainer Type |
| Inner Ring | - | Provided | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Roller Type
-
Spherical Outer Ring -
Cylindrical Outer Ring
-
-
Metric / Inch
- metric
-
Roller O.D. D(Ø)
-
Roller Width B(mm)
-
Roller Follower ID(mm)
-
Thread Size on Cam Follower (M)(mm)
- UNF No.10-32
- UNF 1/2-20
- 1/4 - 28
- M1.4x0.3
- 2
- M2 x0.4
- M2x0.4
- M2.5
- M2.5x0.45
- 3
- M3
- M3 x0.5
- M3x0.5
- M 3x0.5
- UNF 3/8-24
- 4
- M4
- M4 x0.7
- M4x0.7
- M 4x0.7
- 4.826
- 5
- M5
- M5 x0.8
- M5x0.8
- M 5x0.8
- UNF 5/8-18
- 6
- M6
- M6 x1
- M6x1
- M 6x1
- M 6x 1
- 6.350
- UNF 7/8-14
- UNF 7/16-20
- 8
- M8
- M 8x1.25
- M 8x 1.25
- 9.525
- 10
- M10
- 10-32
- M10x1.25
- M 10x1.25
- 11.112
- 12
- M12
- M12x1.5
- 12.700
- 15.875
- 16
- M16
- 18
- M18
- 19.050
- 20
- M20
- M20x1.5
- 22.225
- M24
- M24x1.5
- M30
-
Tightening Method
-
Hex Socket on Head -
Hex Socket on Head, Thread Side -
With Driver Groove
-
-
Cam Follower: Stud Screw (Fine Thread)(mm)
-
Material
- Carbon Steel
- Stainless Steel
-
Roller Lining
- None
- With Resin
- With Urethane
-
Cam Follower Type
-
Roller Follower Type
-
Shaft
-
Unit
-
Roller Guiding Method
-
Inner Ring
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 5 Days or Less
- 6 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
- 13 Days or Less
- 14 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy