Cam Followers & Roller Followers（Roller Guiding Method：Full Roller Type）

• 

  Cam Followers - CF-AB Series.

  THK

  It is compact and rigid shaft bearing with a needle bearing in the cam follower. Ideal for use as a linear motion guide roller in the cam mechanism of automatic and specialty machines
  · [Type and features]
  · CF-AB model comes with hex holes at both ends of the stud and grease nipple for lubriction at the rear. Can be installed and refilled from both directions.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Roller Followers - Spherical outer ring, non-insulated, NART series.

  THK

  [Features]-NART-R type (non-separable type): A non-separable type bearing with side plates fixed inside.-NART-VR type (non-separable type): A full-roll bearing suitable for places where heavy loads act at low speeds on the NART-R type.-Spherical processing is applied to the outer diameter of the outer ring to alleviate eccentric load.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cylindrical Roller Followers - Full complement type, with inner ring, NURT series.

  IKO

  IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
  ·Full Complement Type
  ·with Inner Ring
  ·Crowned Outer Ring
  ·NURT Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	5 Days or more

• 

  Cam Followers - CF-A Series.

  THK

  [Features]-Since a hexagonal hole is provided on the stud head side, it can be easily installed with a hexagon wrench.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cylindrical Roller Cam Followers - Cageless type, with hexagonal key hole, NUCFBR series.

  IKO

  In these bearings, an eccentric collar is assembled with the stud, enabling the outer ring to be positioned easily in the radial direction against the mating track surface. The eccentricity is 0.4 mm to 1.5 mm.
  ·Full Complement
  ·with Hexagon hole
  ·NUCFBR Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	8 Days

• 

  Cam Followers - Head with hexagon wrench socket, flat.

  MISUMI

  Cam follower outer diameter is flat, configurations available for general, high load or low particle emission applications. Options with or without seals. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cam Followers - Head with hexagon wrench socket, crowned.

  MISUMI

  Configurable carbon steel or stainless steel nuts. Options with or without seals. Configurations available for general, high load or low particulate applications. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cam Followers - CFS-A Series.

  THK

  Cam follower with an extremely fine needle roller.
  
  [Features]
  · Easy to use in limited spaces due to the small outer diameter

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Non-Separable Roller Followers - Caged, with inner ring and seals, NARTUUR series.

  IKO

  IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
  ·Non-Separatable
  ·with Inner Ring
  ·Sealed Type
  ·NARTUUR Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	8 Days or more

• 

  Inch Cam Followers - Full complement type, sealed, series CRVBUU.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·Full Complement Type
  ·Sealed Type
  ·With Hexagon Hole
  ·CRVBUU Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	8 Days or more

• 

  Roller Followers - Complete Roller, NATV series.

  NTN

  Bearing used for a mechanism in which the outer ring rolls on a track. Roller followers do not have a shank. A roller or cam follower can be configured. The shape of the outer ring can be cylindrical or spherical. Material is carbon steel. Available with seals.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Standard Type Cam Followers - Full complement type, sealed type, CFVBUUR series.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·Full Complement
  ·Sealed Type
  ·With Hexagon Hole
  ·CFVBUUR Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	5 Days or more

• 

  Eccentric Type Cam Followers - Full complement type, Sealed, Series CFEVBUU.

  IKO

  In these bearings, an eccentric collar is assembled with the stud, enabling the outer ring to be positioned easily in the radial direction against the mating track surface. The eccentricity is 0.4 mm to 1.5 mm.
  ·Full Complement
  ·with Hexagon hole
  ·Sealed Type
  ·CFEVBUU Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	8 Days

• • New Products

  

  Cam Followers - Hexagon socket for head and shank, flat.

  MISUMI

  Hex socket and grease fittings are mounted on both the head and thread part. They can be secured from either head or thread side. Greasing is enabled from both directions.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Standard Type Cam Followers - Full complement type, with shield, CFVB series.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·Full Complement Type
  ·Shield Type
  ·With Hexagon Hole
  ·CFVB Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	8 Days or more

• 

  Inch Cam Followers - Full complement type, armored, CRV series.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·Full Complement Type
  ·Shield Type
  ·With Screwdriver Slot
  ·CRV Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	5 Days or more

• 

  Inch Cam Followers - Full complement type, sealed, CRVUU series.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·Full Complement Type
  ·Sealed Type
  ·With Screwdriver Slot
  ·CRVUU Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	8 Days or more

• 

  Leva Followers - Miniature.

  MISUMI

  •Shaft: Provided
  •Roller Type: Cylindrical Outer Ring
  •Category: Cam Followers
  •Tightening Method: Hex Socket on Head
  •Unit: Metric Series

  • Volume Discount
  • Lead Time Reduction

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	6 Days or more

  Show Stock Products

• • New Products

  

  Cam Followers - Hexagon socket wrench head and shank, crowned.

  MISUMI

  Hex socket and grease fittings are mounted on both the head and thread part. They can be secured from either head or thread side. Greasing is enabled from both directions.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

  Show Stock Products

• 

  Miniature Cam Followers - CFSV Series.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring. These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction. Also, they are designed to have minimal radial internal clearance to increase the loading zone, reducing the effect of shock loads and ensure stable long life.
  ·Miniature Type
  ·CFSV Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	5 Days or more

• 

  Cam Follower - Hexlube® Universal, Heavy Stud, HLW Series

  RBC BEARINGS

  • Heavy Stud, Socket head and sealed
  
  • Sizes H 16 LW through H 22 LW cannot be relubricated.
  
  • HexLube® Cam Followers can be regreased through the hex head using a Lincoln #5803 or Alemite #6785 needle nozzle adapter.

  Days to Ship:	9 Days

• 

  Cam Follower - Hexlube® Universal, Standard Stud, Crowned, CS--LW Series

  RBC BEARINGS

  • Socket head and sealed
  
  • Sizes CS 16 LW through CS 22 LW cannot be relubricated.
  
  • HexLube® Cam Followers can be regreased through the hex head using a Lincoln #5803 or Alemite #6785 needle nozzle adapter.

  Days to Ship:	9 Days or more

• 

  Miniature Cam Followers - Thrust disc, with cage.

  IKO

  Miniature cam follower equipped with a thrust disk made of special synthetic resin with excellent resistance to abrasion and heat. This product receives an axial load from the outer ring caused by a mounting error to reduce friction and abrasion of the sliding surface. These bearings have special resin thrust disc washers with superior wear and heat resistance between the sliding contact area of the outer ring shoulders, stud head and side plate. These disc washers reduce friction and wear due to axial loads caused by misalignment, etc.

  • Volume Discount

  Days to Ship:	8 Days

• 

  Non-Separable Roller Trackers - Caged, with inner ring and shields, NARTR series.

  IKO

  IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
  ·Non-Separatable
  ·with Inner Ring
  ·Shield Type
  ·NARTUUR Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Miniature Cam Followers - Stainless steel, CFSFV series.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring. These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction. Also, they are designed to have minimal radial internal clearance to increase the loading zone, reducing the effect of shock loads and ensure stable long life.
  ·Miniature Type.
  ·Stainless Steel
  ·CFSFV Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	5 Days or more

• 

  Cam follower - Full complement type, with inner ring, NARTVR series.

  IKO

  IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
  ·Full Complement Type
  ·with Inner Ring
  ·with Hexagon Hole
  ·High Carbon Steel
  ·NARTVR Series

  • Volume Discount

  Days to Ship:	Quote

• 

  Eccentric Type Cam Followers - Full complement type, Armored, Series CFEVB.

  IKO

  In these bearings, an eccentric collar is assembled with the stud, enabling the outer ring to be positioned easily in the radial direction against the mating track surface.
  ·The eccentricity is 0.4 mm to 1.5 mm.
  ·Full Complement Type
  ·Shield Type
  ·with Hexagon Hole
  ·CFEB Series

  • Volume Discount

  Days to Ship:	51 Days

• 

  Cylindrical Roller Trackers - Cageless type, crowned outer ring, NURT series.

  IKO

  IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
  ·Full Complement Type
  ·with Inner Ring
  ·Crowned Outer Ring
  ·NURT Series

  • Volume Discount

  Days to Ship:	51 Days

• 

  Cam Follower - Hex Lube CamCentric® Adjustable, Cylindrical and Crowned, S--LWX/CS--LWX Series

  RBC BEARINGS

  • Do not clamp eccentric bushing.
  
  • Eccentric bushing press fitted and not heart treated to permit dowel or set screw engagement.
  
  • Sizes S 16 LWX through S 22 LWX cannot be relubricated.
  
  • Sizes CS 16 LWX through CS 22 LWX cannot be relubricated.
  
  • HexLube® Cam Followers can be regreased through the hex head using a Lincoln #5803 or Alemite #6785 needle nozzle adapter.

  Days to Ship:	9 Days or more

• 

  Cam Follower - Hexlube® Universal, Heavy Stud, Crowned, CHLW Series

  RBC BEARINGS

  • Sizes CH 16 LW through CH 22 LW cannot be relubricated.
  
  • HexLube® Cam Followers can be regreased through the hex head using a Lincoln #5803 or Alemite #6785 needle nozzle adapter.

  Days to Ship:	9 Days

• 

  Cam Follower - Hexlube® Universal, Standard Stud, SL Series

  RBC BEARINGS

  Standard Stud cam followers provide strength for applications with shock loads.
  
  •Slotted Head.
  
  •HexLube® allows for relubrication through the hex head.
  
  • The contacting lip seals provide grease retention and exclusion of contaminants

  Days to Ship:	9 Days

• 

  Roller Follower - Yolk Style, Y--YL Series

  RBC BEARINGS

  The RBC Roller design is unique compared to others with two paths of cylindrical rollers creating a stable outer ring support. The comparatively large diameter of the rollers provides substantially increased dynamic capacity and fatigue life. These rollers offer at least twice and up to nine times the fatigue life of conventional needle roller followers.
  ·With Seals

  Days to Ship:	9 Days or more

• 

  Cam Follower - Hexlube® Universal, Heavy Stud, HL Series

  RBC BEARINGS

  Heavy Stud cam followers provide additional stud strength for applications with high loading or shock loads.
  
  •Slotted Head.
  
  •HexLube® allows for relubrication through the hex head.
  
  • The contacting lip seals provide grease retention and exclusion of contaminants

  Days to Ship:	9 Days

• 

  Cam Follower - Hexlube® Universal, Standard Stud, SLW Series

  RBC BEARINGS

  • Socket head and sealed
  
  • Sizes S 16 LW through S 22 LW cannot be relubricated.
  
  • HexLube® Cam Followers can be regreased through the hex head using a Lincoln #5803 or Alemite #6785 needle nozzle adapter.

  Days to Ship:	9 Days or more

• 

  Roller Follower - Yolk Style, CY--L Series

  RBC BEARINGS

  The RBC Roller design is unique compared to others with two paths of cylindrical rollers creating a stable outer ring support. The comparatively large diameter of the rollers provides substantially increased dynamic capacity and fatigue life. These rollers offer at least twice and up to nine times the fatigue life of conventional needle roller followers.
  ·With Seals
  · Crowned

  Days to Ship:	9 Days or more

Loading...