Cam Followers & Roller Followers（Roller Type：Spherical Outer Ring）

• 

  Standard Type Cam Followers - Caged, shielded type, CFB series.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·With Cage
  ·Shield Type
  ·With Hexagon Hole
  ·CFB Series

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Days or more

• 

  Roller Followers - Spherical outer ring, non-insulated, NART series.

  THK

  [Features]-NART-R type (non-separable type): A non-separable type bearing with side plates fixed inside.-NART-VR type (non-separable type): A full-roll bearing suitable for places where heavy loads act at low speeds on the NART-R type.-Spherical processing is applied to the outer diameter of the outer ring to alleviate eccentric load.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• • On Sale Till 15/12/2024

  

  Cam Followers - CF-AB Series.

  THK

  It is compact and rigid shaft bearing with a needle bearing in the cam follower. Ideal for use as a linear motion guide roller in the cam mechanism of automatic and specialty machines
  · [Type and features]
  · CF-AB model comes with hex holes at both ends of the stud and grease nipple for lubriction at the rear. Can be installed and refilled from both directions.

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

  Show Stock Products

• 

  Standard Type Cam Followers - Caged, sealed type, CFBUU series.【1-10 Pieces Per Package】

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·With Cage
  ·Sealed Type
  ·With Hexagon Hole
  ·CFBUU Series

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Days or more

• 

  Cylindrical Roller Cam Followers - Cageless type, with hexagonal key hole, NUCFBR series.

  IKO

  In these bearings, an eccentric collar is assembled with the stud, enabling the outer ring to be positioned easily in the radial direction against the mating track surface. The eccentricity is 0.4 mm to 1.5 mm.
  ·Full Complement
  ·with Hexagon hole
  ·NUCFBR Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	8 Days

• 

  Roller Trackers - Double row, NUTR series.

  NTN

  A mechanism that allows the outer ring to roll on the raceway, it is a bearing used for eccentric rollers, guide rollers, rocker rollers, cam rollers and pressure rollers.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Roller Followers - NAST-ZZ Series.

  THK

  NAST type isolation bearing with side plates both sides of the inner ring to form a labyrinth seal.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cylindrical Roller Followers - Full complement type, with inner ring, NURT series.

  IKO

  IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
  ·Full Complement Type
  ·with Inner Ring
  ·Crowned Outer Ring
  ·NURT Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	5 Days

• • On Sale Till 15/12/2024

  

  Cam Followers - CF-A Series.

  THK

  [Features]-Since a hexagonal hole is provided on the stud head side, it can be easily installed with a hexagon wrench.

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

  Show Stock Products

• • On Sale Till 15/12/2024

  

  Cam Followers - CF-SFU Series.

  THK

  Type in which the uprights are staggered and can be fastened with screws to simplify installation. Ideal for equipment that does not have space for stud attachment. Type CF-SFU is only available with adhesive. The CF-SFU model is equipped with UU seals even when no UU symbol is used.

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	8 Days or more

  Show Stock Products

• 

  Roller Followers - NAST Series.

  THK

  Isolation bearing combining a thick inner inner ring and precision cage with needle roller.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Standard Type Cam Followers - Caged, with shield, CFBR series.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·With Cage
  ·Shield Type
  ·With Hexagon Hole
  Stainless Steel
  ·CFBR Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	10 Days or more

• 

  Separable Roller Trackers - Caged, with inner ring, NASTZZ series.

  IKO

  IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
  ·Separatable
  ·with Cage<
  ·NASTZZ Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	8 Days or more

• 

  Cam Followers - Head with hexagon wrench socket, crowned.

  MISUMI

  Configurable carbon steel or stainless steel nuts. Options with or without seals. Configurations available for general, high load or low particulate applications. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• • On Sale Till 15/12/2024

  

  Cam Followers - CFT Series.

  THK

  Cam follower with stud head and screw section normally used for tap pipe processing.

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

  Show Stock Products

• • On Sale Till 15/12/2024

  

  Leva Followers - CF Series.

  THK

  This model is an economical Cam Follow having a driver groove or hexagon socket in the stud head. The all-stainless steel type (symbol M) is optimal for clean room applications since it does not develop rust from external atmosphere and generates little dust.

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

  Show Stock Products

• 

  Non-Separable Roller Followers - Caged, with inner ring and seals, NARTUUR series.

  IKO

  IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
  ·Non-Separatable
  ·with Inner Ring
  ·Sealed Type
  ·NARTUUR Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	5 Days or more

• 

  Cam Followers - Solid.

  MISUMI

  •Roller Type: Crowned Type
  •Category: Roller Follower
  •Roller Follower Type: Non-Separate
  •Roller Guiding Method: Retainer Type
  •Inner Ring: Provided

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cam Followers with Bracket - L-shaped, crowned or flat bracket.

  MISUMI

  The cam follower can be configured as flat or crowned as required by the application. Cam follower material available in 52100 bearing steel or 440C stainless steel, bracket material available in carbon steel or stainless steel. Cam follower center height can be configured from 17 to 64mm in 1mm intervals.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	10 Days or more

• 

  Roller Followers - With cage, NATR series.

  NTN

  Spherical shaped bearing used in a mechanism in which the outer ring rolls on the raceway. Various configurable options with or without shank, cylindrical or spherical outer ring. Options with or without seal.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

  Show Stock Products

• 

  Cam Followers - With thrust balls, series CFN-R-A.

  THK

  It is compact and rigid shaft bearing with a needle bearing in the cam follower. Ideal for use as a linear motion guide roller in the cam mechanism of automatic and specialty machines
  · [Type and features]
  · The CFN-R-A model is a cam follower incorporating an internal thrust ball. It has the effect of preventing wear and friction on the sliding surface when a thrust load is applied due to mounting error.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Inch Cam Followers - Full complement type, sealed, CRVUU series.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·Full Complement Type
  ·Sealed Type
  ·With Screwdriver Slot
  ·CRVUU Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	51 Days

• 

  C-Lube Cam Followers - Caged, with hexagonal bore, series CFWBUUR.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.
  •As studs already have threads or steps, they are easyto mount.
  •Cam Followers are follower bearings for cam mechanisms and linear motions and have high rigidity andhigh accuracy.
  •Applications: formachine tools, industrial robots, electronic devices,and OA equipment.
  •These Cam Followers are lubricated with C-Lube, a thermosetting solid-type lubricant which fills the inner space of the bearing.

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	5 Days or more

• • On Sale Till 15/12/2024

  

  Cam Followers - Straight slot, crowned.

  MISUMI

  They can be configured for a general application or for an application where low particulate emission is required (clean room). Options with or without seals. Outer diameters selectable in sizes from 13 to 35mm. Available in 52100 bearing steel or 440C stainless steel. Crowned type roller. Roller guiding method: retainer type.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cam Followers - Urethane coated, flat keyway, crowned.

  MISUMI

  Urethane has a shore hardness of A90. Flat wrench fastening method. Available in 52100 bearing steel or 440C stainless steel. Options with or without seals. Maximum operating temperatures of 80°C. Grease hole located in head. Outer ring type: Crowned.

  • Volume Discount
  • Spec Change

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cam Followers - Urethane coated, hex keyway, crowned.

  MISUMI

  Hexagonal wrench fastening method. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C. Outer ring urethane coating can be configured to A90 or A50 Shore hardness. Options with or without seals. Outer ring type: Crowned.

  • Volume Discount
  • Spec Change

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Eccentric Roller Followers - Hexagonal keyway, crowned.

  MISUMI

  Crowned cam followers are used to keep the load evenly distributed if it is deflected or if there is any misalignment between the follower and the tracked surface. Since the stem is eccentric to the center of the cam follower, it is possible to fine tune the position by rotating the stem during assembly. Roller follower material available in 52100 bearing steel. Options with or without seals. Maximum operating temperatures of 80°C.

  • Volume Discount
  • Spec Change
  • Price Reduction

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Cam Followers - CFH-AB Series.

  THK

  The cam follower is a compact and highly rigid shaft bearing with a needle bearing built in.Ideal as a cam mechanism for automatic machines and dedicated machines, and as a guide roller for linear motion.[Types and features]-The CFH-AB type is a cam follower whose position can be easily finely adjusted by turning the stud because the stud mounting shaft and stud head are eccentric by 0.25 mm to 1.0 mm.-For this reason, machining and assembly man-hours can be significantly reduced, such as alignment with the cam groove and precision machining of the mounting hole position.・ CFH-AB type …… With grease nipple and hexagonal hole. Corresponding stud diameter [mm] is 12 to 30.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Standard Type Cam Followers - Caged, sealed type, series CFFBUU.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·With Cage
  ·Shield Type
  ·With Hexagon Hole
  Stainless Steel
  ·CFFBUU Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	8 Days or more

• 

  Eccentric Type Cam Followers - Full complement type, Sealed, Series CFEVBUU.

  IKO

  In these bearings, an eccentric collar is assembled with the stud, enabling the outer ring to be positioned easily in the radial direction against the mating track surface. The eccentricity is 0.4 mm to 1.5 mm.
  ·Full Complement
  ·with Hexagon hole
  ·Sealed Type
  ·CFEVBUU Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	8 Days

• 

  Cam Follower - Long Life, Double Row, RBC Series

  RBC BEARINGS

  The RBC Roller was developed for customers needing a high degree of assurance of long cam follower life. It can be used to great advantage in conveyors, automotive transfer lines or process industries-food, beverage, plastics, glass and others. Two paths of cylindrical rollers create stable outer ring support. The comparatively large diameter of the rollers provides substantially increased dynamic capacity and fatigue life. [Long life Cam Followers].
  
  Seals can be removed for flow-through lubrication.
  
  To specify RBC Roller® with crowned outer ring, add C

  Days to Ship:	9 Days

• 

  Solid Eccentric Cam Followers - Caged, sealed type, series CFESBUU.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·With Solid Eccentric Stud
  ·With Cage
  ·Sealed Type
  ·With Hexagon Hole
  ·CFESBUU Series

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Inch Cam Followers - Full complement type, sealed, series CRVBUU.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·Full Complement Type
  ·Sealed Type
  ·With Hexagon Hole
  ·CRVBUU Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	8 Days or more

• 

  Eccentric Type Cam Followers - Caged with hex key hole, with seals, series CFEBUU.

  IKO

  In these bearings, an eccentric collar is assembled with the stud, enabling the outer ring to be positioned easily in the radial direction against the mating track surface. The eccentricity is 0.4 mm to 1.5 mm.
  
  •Eccentric Type
  
  •with Cage
  
  •Sealed
  
  •CFEBUU Series

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• • New Products

  

  Cam Followers - Hexagon socket wrench head and shank, crowned.

  MISUMI

  Hex socket and grease fittings are mounted on both the head and thread part. They can be secured from either head or thread side. Greasing is enabled from both directions.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Followers of Leva - Resin, crowned.

  MISUMI

  MC Nylon Resin is press-fit into the outer ring of Cam Follower - With Hex Socket.

  • Volume Discount
  • Spec Change

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Cam Followers with Bracket - Block, crowned or flat bracket.

  MISUMI

  The cam follower can be configured as flat or crowned as required by the application. Cam follower material available in 52100 bearing steel or 440C stainless steel, bracket material available in carbon steel or stainless steel. Cam follower center height can be configured from 12 to 40mm in 1mm intervals.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	10 Days or more

• 

  Roller Followers - Separate, urethane coated, type R.

  MISUMI

  This type of roller follower does not have a stem. The urethane is baked onto the outer ring of the roller follower. Roller follower material available in 52100 bearing steel. Urethane is A90 shore hardness. Options with or without seals. Maximum operating temperatures of 80°C.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Standard Type Cam Followers - Full complement type, sealed type, CFVBUUR series.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·Full Complement
  ·Sealed Type
  ·With Hexagon Hole
  ·CFVBUUR Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	5 Days or more

• 

  Separable Roller Trackers - Open, with cage and without inner ring RNAST series.

  IKO

  IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
  ·Separatable
  ·without Inner Ring
  ·Open Type
  ·with Cage
  ·RNAST Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	11 Days or more

• 

  Roller Follower - Long Life, Double Row, RBY Series

  RBC BEARINGS

  • Long life yoke followers.
  
  • Seals can be removed for flow-through lubrication.
  
  • To specify RBC Roller® with crowned outer ring, add C

  Days to Ship:	9 Days or more

• 

  Cam Followers - With urethane roller, crowned or flat.

  MISUMI

  Clamping method with flat groove. The outer diameter of the roller can be configured as crowned or flat. Options with or without seals. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cam Followers - With urethane roller, crowned or flat, hexagonal wrench fastening.

  MISUMI

  Hexagonal wrench fastening method. Available in 52100 bearing steel or 440C stainless steel. Configurable carbon steel or stainless steel nuts. Maximum operating temperatures of 80°C. Outer ring coating urethane can be configured to A90 or A50 Shore hardness.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

  Show Stock Products

• 

  Cam Followers - Resin.

  MISUMI

  The outer ring has a resin coating (Nylon MC). The outer ring can be flat or crowned. Tightening method can be flat or with hexagon keyway. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

  Show Stock Products

• 

  Cam Followers - Threaded for grease fittings, crowned.

  MISUMI

  Tapped holes for grease fittings are provided. Installation is simple.

  • Volume Discount
  • Lead Time Reduction

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

Loading...