(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Spring Plungers（Thread-Locking Adhesive：None）
| Days to Ship |
|
|---|
-
- On Sale Till 14/06/2024
MISUMI
•Shape: Push Up Type
•Wrench Hole Shape: Hex
•Body Material: 1045 Carbon Steel
•Initial Load (Range) (n): 0.01～50
•Pin Plunger Type: Spherical- Volume Discount
- Spec Change
- inCAD Components
Special Price Days to Ship: 8 Days or more Show Stock Products
-
Spring Plungers - In stainless steel.
MISUMI
•Shape: Push Up Type
•Wrench Hole Shape: Hex
•Body Material: 304 Stainless Steel
•Initial Load (Range) (n): 0.01～50
•Pin Plunger Type: Spherical- Volume Discount
- Degreasing
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Spring Plungers - Standard, short length.
MISUMI
•Shape: Push Up Type
•Wrench Hole Shape: Hex
•Body Material: 4137 Alloy Steel
•Stroke Dimension S (mm): 1.0-4.5
•Initial Load (Range) (n): 0.01～50- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Spring Plungers - Short length, stainless steel.
MISUMI
•Shape: Push Up Type
•Wrench Hole Shape: Hex
•Body Material: 304 Stainless Steel
•Initial Load (Range) (n): 0.01～50
•Pin Plunger Type: Short Stroke- Volume Discount
- Degreasing
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Spring Plungers - PSF/PSN-Series.
NBK
[Features]
· Both of the steel and stainless steel plungers are available with plastic pins.
· PSF: Light load, steel plunger.
· PSF-SN: Light load, full stainless steel plunger.
· PSN: Light load, steel plunger with plastic pin.
· PSF-KN: Light load, stainless steel plunger with plastic pin.
· PSF-ss: Heavy load, steel plunger.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Spring Plungers - Short stroke, stainless steel, SPS series.
Konishi
All-stainless steel ball short-stroke plungers, ideal for food machinery/outdoor installation due to its superior anti-rust properties.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
MISUMI
Slits are applied for side-mounting with a set screw.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Spring Plungers - Short length, PCF series.
NBK
Light-load and heavy-load types available in steel and stainless steel.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Spring Plungers - Threaded tip.
MISUMI
•Shape: Push Up Type
•Wrench Hole Shape: Hex
•Body Material: 1045 Carbon Steel
•Main Body Surface Treatment: Black Oxide
•Nose Material: 1045 Carbon Steel- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Spring Plungers, with pin and slot - INCH
HALDER
To be used for positioning, indexing, locking, latching as well as ejecting.To be used for locating or for applying pressure, as a detent or for ejection.
- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days or more -
Spring Plungers- Short stroke, stainless steel, PSPS series.
NBK
[Features]
- Short stroke plunger made of stainless steel.
- Outstanding durability.
- PSPS-NS or PSPS-NZ pins are made of plastic.
- Does not scratch the workpieces.
- Use the dedicated plunger wrench PPW for mounting or dismounting from the pin side.
- Use the ball button BB with improved abrasion resistance for the receiving side.
- Products with special dimension, load, or material specs can also be produced.- Volume Discount
Days to Ship: 8 Days or more -
Nabeya
The perfect plunger for positioning, fixing, pressing, pushing against, and pushing apart.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Spring Plungers - Short stroke, SP series.
Konishi
The screw contains a spring; the force of the spring can make the ball go in and out. Can be used to calculate, select the position of, and push out jigs. Screw diameters from M3 to M24 available; select the size you need.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Spring Plungers - Short stroke, SP-D series.
Konishi
An integral spring inside the screw forces a pin in and out. Can be used to determine, select the position of, and push out fixtures. Screw diameters from M4 to M16 are available. Simply select the size you require.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Spring Plungers, with pin and internal hexagon
HALDER
To be used for locating or for applying pressure, as a detent or for ejection.
- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
Spring Plungers, with pin and internal hexagon - INCH
HALDER
To be used for positioning, indexing, locking, latching as well as ejecting.To be used for locating or for applying pressure, as a detent or for ejection.
- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days or more -
Spring Plungers - Selectable tip.
MISUMI
•Shape: Push Up Type
•Body Material: 303 Stainless Steel
•Nose Material: 304 Stainless Steel
•Initial Load (Range) (n): 0.01～50
•Mounting Method: Press Fit- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Spring Plungers - Short length.
MISUMI
30 ~ 50% shorter in dimensions compared to the conventional products.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Spring Plungers - Short length, PSS series.
NBK
Stainless steel for high resistance to corrosion/heat.
[Features]
- PSS-2: Made of steel; light load.
- PSS-1: Made of steel, heavy load.
- PSSS-1: Made of stainless steel, heavy load.
- PSSS-3: Made of stainless steel; super-heavy load.
- The PSSS-1 and PSSS-3 are made entirely of stainless steel.
- Excellent in cutting and heat resistance.
- The PSS-2 and the PSS-1 are equipped with a nylon lock (except for M4).
- Use a locking service with the PSSS-1 and PSSS-3.
- Use the ball button BB with improved abrasion resistance for the receiving side.- Volume Discount
Days to Ship: 8 Days or more Show Stock Products
-
Nabeya
This plunger is ideal for positioning, fixing, pressing, pushing against and pushing apart.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Nabeya
[Features]
· For the PPC-J, the hexagon socket set screw is glossy.
· Optimal plunger for positioning, fixing, pressing, and press releasing.- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Spring Plungers - Short length, SPL series.
Konishi
The screw contains a spring; the force of the spring can make the ball go in and out. Can be used to calculate, select the position of, and push out jigs. Screw diameters from M4 to M24 available; select the size you need.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Spring Plungers - Short stroke in stainless steel, SPS-D series.
Konishi
A short-stroke plunger in full stainless steel. Ideally suited to catering machinery and outdoor installations due to its superior anti-rust properties.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Spring Plungers, with pin and slot
HALDER
To be used for locating or for applying pressure, as a detent or for ejection.
- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days -
Spring Plungers, with internal hexagon and seal/free cutting steel
HALDER
To be used for locating or for applying pressure, as a detent or for ejection.By means of the seal, liquid cannot penetrate into the spring plunger.
- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Nose Material |
| Body Material |
| Body O.D./Thread M(mm) |
| Stroke S(mm) |
| Mounting Method |
| Thread-Locking Adhesive |
| Pin Plunger Type |
| Wrench Hole Shape |
| Main Body Surface Treatment |
| Nose Surface Treatment |
| Nose Heat Treatment |
| Initial Load (Range)(N) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | NBK | Konishi | MISUMI | NBK | MISUMI | HALDER | NBK | Nabeya | Konishi | Konishi | HALDER | HALDER | MISUMI | MISUMI | NBK | Nabeya | Nabeya | Konishi | Konishi | HALDER | HALDER |
| Product Series | Spring Plungers - Short stroke, stainless steel, SPS series. | Spring Plungers- Short stroke, stainless steel, PSPS series. | Spring Plungers - Short stroke in stainless steel, SPS-D series. | Spring Plungers, with internal hexagon and seal/free cutting steel | |||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship |
8 Days or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 9 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 10 Days | 10 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
8 Days or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 10 Days | 10 Days |
| Specifications |
|
|
|
|
|
|
|
| |||||||||||||||||
| Nose Material | Steel / Resin | Stainless Steel / Resin | Steel / Resin | Stainless Steel / Resin | Steel / Stainless Steel / Resin | Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Stainless Steel / Resin | Steel / Stainless Steel | Steel | Resin | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel / Resin | Steel | Resin | Steel / Stainless Steel | Steel / Stainless Steel |
| Body Material | Steel | Stainless Steel | Steel | Stainless Steel | Steel / Stainless Steel | Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel |
| Body O.D./Thread M(mm) | 5 ～ 16 | 3 ～ 16 | 5 ～ 16 | 3 ～ 16 | 3 ～ 24 | 4 ～ 16 | 1.5 ～ 5 | 4 ～ 24 | 12 ～ 20 | - | 4 ～ 12 | 6 ～ 12 | 3 ～ 24 | 4 ～ 16 | - | - | 1.5 ～ 5 | 1.5 ～ 5 | 4 ～ 16 | 4 ～ 12 | 3 ～ 12 | 4 ～ 24 | 4 ～ 16 | - | - |
| Stroke S(mm) | 1.0-4.5 ～ 10-20 | 1.0-4.5 ～ 10-20 | 1.0-4.5 | 1.0-4.5 | 1 ～ 10 | 1.5 ～ 5 | 1.0-4.5 ～ 10-20 | 1.5 ～ 8 | 10-20 ～ 30-80 | 0.052 ～ 0.215 | 2 ～ 5 | 2 ～ 3.5 | 1 ～ 10 | 1.5 ～ 5 | - | 0.063 ～ 0.5 | 1.0-4.5 ～ 10-20 | 1.0-4.5 | 1.2 ～ 4.5 | 1.5 ～ 3.5 | 1 ～ 4 | 1.5 ～ 8 | 1.5 ～ 5 | - | - |
| Mounting Method | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Press Fit | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Press Fit | Press Fit | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In |
| Thread-Locking Adhesive | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None |
| Pin Plunger Type | Spherical | Spherical | Short Stroke | Short Stroke | Spherical / With Hex Socket | Spherical / With Hex Socket / Short Stroke | Flat | Spherical | Tapped Tip | - | Spherical / With Hex Socket / Short Stroke | With Hex Socket | Spherical / With Hex Socket / Short Stroke | Spherical / With Hex Socket / Short Stroke | - | - | Flat / Spherical / Taper R | Flat / Spherical | Spherical / With Hex Socket | Spherical | With Hex Socket | Spherical / Short Stroke | Spherical / With Hex Socket / Short Stroke | - | - |
| Wrench Hole Shape | Hex | Hex | Hex | Hex | Hex | Hex | - | Flat | Hex | Flat | Hex | Hex | Hex | Hex | Hex | Hex | - | - | Hex | Flat | Hex | Flat | Hex | Flat | Hex |
| Main Body Surface Treatment | Black Oxide / Nickel Plating | None | Black Oxide / Nickel Plating | None | None / Black Oxide | None | None | None / Black Oxide | Black Oxide | None / Black Oxide | None | None / Black Oxide / Trivalent Chromate | Black Oxide | Black Oxide | None | None / Black Oxide | None | None | None | None / Black Oxide / Trivalent Chromate | None / Black Oxide | Black Oxide | None | None / Black Oxide | None / Black Oxide |
| Nose Surface Treatment | None / Black Oxide / Trivalent Chromate | None | None / Black Oxide / Trivalent Chromate | None | None / Black Oxide / Nitriding Treatment | Nitriding Treatment | None | Black Oxide / Trivalent Chromate / Nitriding Treatment | Black Oxide / Electroless Nickel | None / Black Oxide | None | None / Black Oxide / Electroless Nickel | Black Oxide | None | None / Black Oxide | None / Black Oxide | None | None | None | None / Black Oxide / Electroless Nickel | None / Black Oxide | Black Oxide | None | None / Black Oxide | None / Black Oxide |
| Nose Heat Treatment | None / Carburized | None / Hardened | None / Carburized | None / Hardened | None / Hardened | None | None | None / Hardened | Carburized | None / Hardened | None / Hardened | None / Carburized | None | None | None / Hardened | None / Hardened | None | None | Hardened | None / Carburized | None / Carburized | None | None | None / Hardened | None / Hardened |
| Initial Load (Range)(N) | 0.01 to 50 | 0.01 to 50 | 0.01 to 50 | 0.01 to 50 | 0.01 to 50 / 50.01 to 100 | 0.01 to 50 | 0.01 to 50 | 0.01 to 50 / 50.01 to 100 | 0.01 to 50 | - | 0.01 to 50 | 0.01 to 50 | 0.01 to 50 / 50.01 to 100 | 0.01 to 50 | - | - | 0.01 to 50 | 0.01 to 50 | 0.01 to 50 | 0.01 to 50 | 0.01 to 50 | 0.01 to 50 / 50.01 to 100 | 0.01 to 50 | - | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Nose Material
- Steel
- Stainless Steel
- Resin
-
Body Material
- Steel
- Stainless Steel
- Resin
-
Metric / Inch
- metric
-
Body O.D./Thread M(mm)
-
Stroke S(mm)
-
Mounting Method
- Screw-In
- Press Fit
-
Thread-Locking Adhesive
- None
- Provided
-
Pin Plunger Type
-
Wrench Hole Shape
-
Main Body Surface Treatment
-
Nose Surface Treatment
-
Nose Heat Treatment
-
Initial Load (Range)(N)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy