(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 p.m. 5/25/2024 to 6:00 p.m. (CDT) 5/26/2024. We apologize for the inconvenience.
Plain & Self-Lubricating Bearings（Type：Shouldered）
Since bearings usually receive a lot of frictional resistance that generates heat, lubricants such as oil or grease are used to prevent the seizing or abnormal wear that this frictional heat could otherwise cause. Lubrication-free bushings don't need lubricating oil because the bearing body has a lubricating structure made possible by lubricating oil in the bearing body, or by embedded solid lubricant or the like. Since they don't need lubricating oil, lubrication-free bushings are often used for applications such as precision machinery that makes lubricating oil refilling difficult, and equipment with poor affinity to oil. They also greatly reduce maintenance costs by eliminating the need for regular lubrication and enabling stable operation over long periods. Lubrication-free bushings come in a variety of shapes that can be used for different applications as needed. Examples include straight bushings, collar bushings, flange bushings and housing bushings.
Type
-
Straight -
Shouldered -
Flanged -
Pillow Block -
Open Type
-
Oil Free Bushings - With shoulder, Bronze.
MISUMI
Shouldered, less likely to pull-out.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Bushing 500SP1 - With shoulder, copper alloy, SPF series.
Oiles
Oil-free bushing with shoulder made of Copper, with incorporated solid lubricant (Graphite). With high performance in heavy loads and at low speeds. Excellent wear resistance in areas where it is difficult to form an oil film, such as reciprocating movements, oscillating movements and frequent starts and stops. Excellent chemical and corrosion resistance.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - With shoulder, multilayer (PTFE).
MISUMI
Has a Thin wall and is compact.
- Volume Discount
- New Pricing
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - Thrust type, copper alloy.
MISUMI
Embedded lubricant at flange allows to bear radial journal load and thrust load at the same time.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Drymet LF Bushings - With shoulder, multilayer PTFE, LFF series.
Oiles
Drymet LF (LFF) shoulder bushing that can be used over a wide temperature range and has excellent chemical resistance. It is an oil-free bushing composed of three layers: Ethylene Tetrafluoride resin layer with filler, Sintered Copper layer and supporting metal. It can be used without lubrication and is very compact due to its thinness and light weight. It has a low coefficient of friction, stable under high load and low speed conditions, and has excellent wear resistance. When used in conjunction with lubricating oil, it can be used with a high PV value even in the medium and high speed range. It can be used over a wide range of temperatures, from low to high, and has excellent chemical resistance. Excellent dimensional stability, mechanical strength and thermal conductivity.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - With shoulder, copper alloy, I.D. E7 tolerance.
MISUMI
Shouldered to prevent itself from being removed from the plate.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - Polyacetal, with shoulder.
MISUMI
Spec-designed to comply with Food Sanitary Act
- Volume Discount
- New Pricing
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Thrust Bushing 500SP1 - With shoulder, copper alloy, SPFG series.
Oiles
Thrust bushing made of copper, with incorporated solid lubricant (graphite). With high performance in heavy loads and at low speeds. Excellent wear resistance in areas where it is difficult to form an oil film, such as reciprocating movements, oscillating movements and frequent starts and stops. Excellent chemical and corrosion resistance. Radial load and thrust load can be received simultaneously with only this bushing.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Bushing 80 - Polyacetal, with shoulder, Series 80F.
Oiles
Polyacetal bushing, with shoulder, with excellent load capacity and wear resistance. Oil-free bushing, in which the lubricant is uniformly dispersed in the polyacetal resin. It has a low coefficient of friction and excellent speed characteristics and can be used without lubrication.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - Straight, made of metal.
MISUMI
Optimized for use in high load, low speed applications.
- Volume Discount
- METRIC
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
3000 Oiles Bushings - With shoulder, cast iron, series 30F.
Oiles
Cast iron bushing, with shoulder, ideal for reducing the frequency of lubrication. Bushing made porous by actively utilizing the growth phenomenon of cast iron and impregnated with lubricating oil. Compared with copper alloy bushings, the lubrication frequency can be greatly reduced. Excellent wear resistance with good oil film retention. Can be used with any type of shaft, for rotary, linear or combined rotary and linear motion applications.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Daidyne DDK05 Bushings - With shoulder, metal polymer, K5F series.
Daido Metal
This product is an environmentally friendly Lead free bearing. This compound bearing, a "perfect oil-less bearing" that does not require any lubricant at all uses polytetrafluoroethylene (PTFE) resin, has excellent low friction characteristics and also optimizes metal properties such as strength and dimensional stability.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
BEAREE Bushings - Shoulder sleeve type, PTFE, ARF series.
NTN
Smooth straight bushings made of high quality PTFE resin. With low coefficient of friction, wear resistance, anti-adhesion, heat resistance and chemical resistance. With little deformation due to compressive load. The ARF model has a flange/shoulder which allows it to receive axial loads, and the inner diameter is standardized from 4 mm to 50 mm. Resistant to chemical and oil environments.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - PTFE, with shoulder.
MISUMI
PTFE shoulder bushing that stands out for its excellent performance in different environmental conditions, even better than Polyacetal bushings. Bushing suitable for the food industry, with excellent resistance to chemicals and high temperatures (-200 to 200°C).
- Volume Discount
- inCAD Components
Days to Ship: Same day Show Stock Products
-
Oil Free Bushings - With shoulder, iglidur® G.
igus
An oil-free shoulder bushing that can be used with shafts of any material, for linear or rotary applications. Operating temperature from -40°C to +130°C. Economical bushing suitable for a wide range of applications. Maintenance-free, no lubrication or greasing required. Excellent vibration damping properties. High abrasion and dust resistance. For medium and higher loads. For low to medium speeds. For rotary and oscillating movements.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 7 Days or more -
PBC Simplicity® Linear Bushings - With shoulder, multilayer PBC (Inches).
MISUMI
Aluminum bushings with shoulder, Frelon Gold®, recommended for working with bearing steels such as 52100. Inch dimensions, compatible with inch diameter shafts.
- Volume Discount
- INCH
Days to Ship: 5 Days or more -
Oil Free Bushings - With shoulder, iglidur® J.
igus
Oil-free shoulder bushing suitable for high-speed applications, where the risk of stick-slip effect is reduced. Non-lubricated and maintenance-free bushing. Operating temperature from -50°C to +90°C. Low coefficient of friction in non-lubricated operation. Excellent vibration damping properties. Good chemical resistance. Ideal for shaft materials with low hardness. Low moisture absorption rate. Suitable for low and medium loads.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Oil Free Bushings - With shoulder, iglidur® X.
igus
Oil-free shoulder bushing with excellent resistance to high temperatures and chemicals. Excellent wear resistance and maintenance-free. Heat resistant during continuous operation -100 to +250°C (+315°C short term). Wide range of chemical resistance. High compressive strength. Low moisture absorption. Excellent wear resistance over the entire temperature range. Ideal for surface pressures up to 150 MPa.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Type |
| Metallic |
| Bushing Material |
| I.D. d(mm) |
| I.D. d(inch) |
| O.D. D(mm) |
| O.D. D(inch) |
| Overall Length L(mm) |
| Overall Length L(inch) |
| Maximum Allowable PV Value Range(N/mm2•m/s) |
| Maximum Allowable PV Value(N/mm2•m/s) |
| Max. Allowable Surface Pressure P(N/mm2) |
| Max. Allowable Velocity V(m/s) |
| Housing Style |
| Housing Material |
| Length Type |
| Mounting Shaft Fits |
| Mounting Hole Fits |
| Thickness T(mm) |
| Lubrication Condition |
| Environment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | Oiles | MISUMI | MISUMI | Oiles | MISUMI | MISUMI | Oiles | Oiles | MISUMI | Oiles | Daido Metal | NTN | MISUMI | igus | MISUMI | igus | igus |
| Product Series | Drymet LF Bushings - With shoulder, multilayer PTFE, LFF series. | Oil Free Bushings - With shoulder, copper alloy, I.D. E7 tolerance. | Thrust Bushing 500SP1 - With shoulder, copper alloy, SPFG series. | Daidyne DDK05 Bushings - With shoulder, metal polymer, K5F series. | PBC Simplicity® Linear Bushings - With shoulder, multilayer PBC (Inches). | |||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Days to Ship |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day
Show Stock Products | 7 Days or more | 5 Days or more | 8 Days or more | 8 Days or more |
| Specifications |
|
|
|
|
|
|
|
| ||||||||||
| Type | Shouldered | Shouldered | Shouldered | Shouldered | Shouldered | Shouldered | Shouldered | Shouldered | Shouldered | Shouldered | Shouldered | Shouldered | Shouldered | Shouldered | Shouldered | Shouldered | Shouldered | Shouldered |
| Metallic | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Bushing Material | Bronze | - | Sintered Bronze with PTFE | Graphite Impregnated Brass | Sintered Bronze with PTFE | Graphite Impregnated Brass | Polyacetal | - | - | Cast Iron | Cast Iron | Sintered Bronze with PTFE | - | PTFE | - | Frelon Gold® | - | - |
| I.D. d(mm) | 5 ～ 30 | 6 ～ 120 | 3 ～ 50 | 6 ～ 50 | 3 ～ 60 | 5 ～ 50 | 3 ～ 50 | 6 ～ 80 | 2 ～ 50 | 6 ～ 30 | 5 ～ 60 | 3 ～ 60 | 3 ～ 50 | 3 ～ 20 | 3 ～ 100 | - | 3 ～ 55 | 2 ～ 60 |
| I.D. d(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.38 in (3/8") ～ 1.00 in (1") | - | - |
| O.D. D(mm) | 9 ～ 40 | 10 ～ 140 | 5 ～ 55 | 12 ～ 62 | 4.6 ～ 65 | 7 ～ 60 | 5 ～ 55 | 10 ～ 96 | 4 ～ 55 | 10 ～ 38 | 8 ～ 75 | 4.6 ～ 65 | 6 ～ 60 | 6 ～ 26 | 4.5 ～ 105 | - | 4.5 ～ 60 | 4 ～ 65 |
| O.D. D(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.50 in (1/2") ～ 1.81 in (1-13/16") | - | - |
| Overall Length L(mm) | 10 ～ 50 | 10 ～ 100 | 3 ～ 40 | 10 ～ 60 | 3 ～ 60 | 10 ～ 60 | 3 ～ 50 | 11 ～ 90 | 2 ～ 50 | 8 ～ 60 | 5 ～ 80 | 3 ～ 60 | 5 ～ 60 | 3 ～ 30 | 2 ～ 50 | - | 3 ～ 50 | 3 ～ 40 |
| Overall Length L(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.38 in (3/8") ～ 1.00 in (1") | - | - |
| Maximum Allowable PV Value Range(N/mm2•m/s) | 1.1 to 2.0 | 1.1 to 2.0 | 2.1 to 5.0 | 1.1 to 2.0 | 2.1 to 5.0 | 1.1 to 2.0 | 2.1 to 5.0 | 1.1 to 2.0 | 2.1 to 5.0 | 0.3 to 1.0 | 1.1 to 2.0 | 1.1 to 2.0 | 0.3 to 1.0 | 0.3 to 1.0 | 0.3 to 1.0 | - | 0.3 to 1.0 | 1.1 to 2.0 |
| Maximum Allowable PV Value(N/mm2•m/s) | 1.65 | 1.65 | 3.6 | 1.65 | 3.6 | 1.65 | 2.45 | 1.65 | 2.45 | 0.5 | 1.25 | 1.72 | 1 | 1 | 0.42 | 20000 | 0.34 | 1.32 |
| Max. Allowable Surface Pressure P(N/mm2) | 10 | 29 | 49 | 29 | 49 | 29 | 17.5 | 29 | 17.5 | 5 | 10 | 137 | - | 7 | 80 | 3000 | 35 | 150 |
| Max. Allowable Velocity V(m/s) | 1.66 | 0.5 | 0.65 | 0.5 | 0.65 | 0.5 | 0.85 | 0.5 | 0.85 | 0.15 | 1 | 1 | - | 1.65 | 1 | 300 | 1.5 | 1.5 |
| Housing Style | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Housing Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Length Type | - | Single | - | - | Single | - | - | Single | Single | - | Single | - | Single | - | - | Single | - | - |
| Mounting Shaft Fits | - | e7 | - | - | - | - | - | e7 | h7 | - | h7 | - | h6 | - | h9 | - | h9 | h9 |
| Mounting Hole Fits | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | - | H7 | H7 | M7 | H7 | H7 | - | H7 | H7 |
| Thickness T(mm) | - | - | - | - | - | - | - | - | - | - | - | 0.8 ～ 2.5 | 1.5 ～ 5 | - | - | - | - | - |
| Lubrication Condition | - | Unlubricated | - | - | Unlubricated | - | - | Unlubricated | Unlubricated | - | Regular Lubrication | Unlubricated | Unlubricated | - | Unlubricated | - | Unlubricated | Unlubricated |
| Environment | - | Standard / Heat Resistant / Foreign Object Resistant | - | - | Standard / In Oil | - | Food | Standard / Heat Resistant / Foreign Object Resistant | Standard | - | Standard | Standard / In Oil | Standard / Heat Resistant / In Oil / In Water / In Seawater / In Chemical | Food | Standard / Foreign Object Resistant / Vibration Resistant / In Oil | - | Standard / Foreign Object Resistant / Vibration Resistant / In Oil / In Water / In Seawater | Standard / Heat Resistant / Foreign Object Resistant / Vibration Resistant / In Oil / In Water / In Seawater / In Chemical |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Metallic
-
Bushing Material
- Graphite Impregnated Brass
- Bronze
- Cast Iron
- Polyacetal
- PTFE
- Fluororesin
- Iglide J®
- DryLin® R
- Sintered Bronze with PTFE
- Frelon Gold®
-
Metric / Inch
- metric
- inch
-
I.D. d(mm)
-
I.D. d(inch)
-
O.D. D(mm)
-
O.D. D(inch)
- 0.13 in (1/8")
- 0.19 in (3/16")
- 0.25 in (1/4")
- 0.31 in (5/16")
- 0.38 in (3/8")
- 0.50 in (1/2")
- 0.63 in (5/8")
- 0.69 in (11/16")
- 0.75 in (3/4")
- 0.81 in (13/16")
- 0.88 in (7/8")
- 0.94 in (15/16")
- 1.00 in (1")
- 1.13 in (1-1/8")
- 1.25 in (1-1/4")
- 1.50 in (1-1/2")
- 1.56 in (1-9/16")
- 1.75 in (1-3/4")
- 1.81 in (1-13/16")
- 2.00 in (2")
- 2.38 in (2-3/8")
- 3.00 in (3")
- 3.75 in (3-3/4")
- 4.50 in (4-1/2")
- 6.00 in (6")
-
Overall Length L(mm)
- 2
- 02
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 3
- 03
- 3.5
- 3.8
- 4
- 04
- 4.4
- 4.5
- 4.8
- 05
- 5
- 5.5
- 5.9
- 06
- 6
- 6.5
- 7
- 7.5
- 08
- 8
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 20
- 21
- 21.5
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31.5
- 32
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 42
- 42.5
- 45
- 47
- 48
- 50
- 51
- 52
- 55
- 56
- 57
- 58
- 59
- 60
- 62
- 63
- 64
- 65
- 67
- 67.5
- 68
- 69
- 70
- 73
- 74
- 75
- 76
- 77
- 78
- 80
- 81
- 82
- 85
- 86
- 90
- 95
- 97
- 100
- 103
- 108
- 110
- 112
- 115
- 120
- 125
- 128
- 140
- 141
- 150
- 158
- 170
- 175
- 188
- 200
- 240
-
Overall Length L(inch)
- 0.25 in (1/4")
- 0.31 in (5/16")
- 0.38 in (3/8")
- 0.50 in (1/2")
- 0.56 in (9/16")
- 0.63 in (5/8")
- 0.75 in (3/4")
- 0.84 in (27/32")
- 0.88 in (7/8")
- 1.00 in (1")
- 1.03 in (1-1/32")
- 1.25 in (1-1/4")
- 1.33 in (1-5/16")
- 1.50 in (1-1/2")
- 1.63 in (1-5/8")
- 1.75 in (1-3/4")
- 1.78 in (1-25/32")
- 2.19 in (2-3/16")
- 2.25 in (2-1/4")
- 2.38 in (2-3/8")
- 2.50 in (2-1/2")
- 2.63 in (2-5/8")
- 2.81 in (2-13/16")
- 2.95 in (2-61/64")
- 2.98 in (2-63/64")
- 3.00 in (3")
- 3.09 in (3-3/32")
- 3.25 in (3-1/4")
- 4.00 in (4")
- 4.13 in (4-1/8")
- 4.50 in (4-1/2")
- 5.00 in (5")
- 6.00 in (6")
- 8.00 in (8")
-
Maximum Allowable PV Value Range(N/mm2•m/s)
-
Maximum Allowable PV Value(N/mm2•m/s)
-
Max. Allowable Surface Pressure P(N/mm2)
-
Max. Allowable Velocity V(m/s)
-
Housing Style
-
Housing Material
-
Length Type
-
Mounting Shaft Fits
-
Mounting Hole Fits
-
Thickness T(mm)
-
Lubrication Condition
-
Environment
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
- 13 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy