(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Plain & Self-Lubricating Bearings（Lubrication Condition：Unlubricated）
Since bearings usually receive a lot of frictional resistance that generates heat, lubricants such as oil or grease are used to prevent the seizing or abnormal wear that this frictional heat could otherwise cause. Lubrication-free bushings don't need lubricating oil because the bearing body has a lubricating structure made possible by lubricating oil in the bearing body, or by embedded solid lubricant or the like. Since they don't need lubricating oil, lubrication-free bushings are often used for applications such as precision machinery that makes lubricating oil refilling difficult, and equipment with poor affinity to oil. They also greatly reduce maintenance costs by eliminating the need for regular lubrication and enabling stable operation over long periods. Lubrication-free bushings come in a variety of shapes that can be used for different applications as needed. Examples include straight bushings, collar bushings, flange bushings and housing bushings.
Type
-
Straight -
Shouldered -
Flanged -
Pillow Block -
Open Type
-
- On Sale Till 15/12/2024
Bushing 500SP1 - Straight, copper alloy, SPB series.
Oiles
Straight oil-free bushing made of copper, with solid lubricant incorporated (graphite). Excellent wear resistance in areas where it is difficult to form an oil film, such as reciprocating movements, oscillating movements and frequent starts and stops. Excellent chemical and corrosion resistance but not recommended for use with sea water.
- Volume Discount
- CAD ：
- 2D
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Bushing 500SP1 - With shoulder, copper alloy, SPF series.
Oiles
Oil-free bushing with shoulder made of Copper, with incorporated solid lubricant (Graphite). With high performance in heavy loads and at low speeds. Excellent wear resistance in areas where it is difficult to form an oil film, such as reciprocating movements, oscillating movements and frequent starts and stops. Excellent chemical and corrosion resistance.
- Volume Discount
- CAD ：
- 2D
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Drymet LF Bushings - Straight, multilayer PTFE, LFB series.
Oiles
Drymet LF (LFF) straight bushing that can be used over a wide temperature range and has excellent chemical resistance. It is an oil-free bushing composed of three layers: Ethylene Tetrafluoride resin layer with filler, Sintered Copper layer and supporting metal. It can be used without lubrication and is very compact due to its thinness and light weight. It has a low coefficient of friction, stable under high load and low speed conditions, and has excellent wear resistance. When used in conjunction with lubricating oil, it can be used with a high PV value even in the medium and high speed range. It can be used over a wide range of temperatures, from low to high, and has excellent chemical resistance. Excellent dimensional stability, mechanical strength and thermal conductivity.
- Volume Discount
- CAD ：
- 2D
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Toughmet bushings - Straight, multilayer, TMB series.
Oiles
High temperature and high load bearing with excellent resistance to foreign matter. Composed of two layers: a copper-based sintered alloy layer with a special solid lubricant dispersed evenly and thinly, and a backing metal. Excellent load and heat resistance. Excellent performance even in reciprocating/oscillating/intermittent operation. When used in conjunction with lubricating oil, the oil retention property of the sintered copper-based alloy layer and the action of the solid lubricant provide even better performance. Because the bearing is thin, a compact design is possible.
- Volume Discount
- CAD ：
- 2D
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Daidyne DDK05 Bushings - Straight, metal polymer, K5B series.
Daido Metal
This product is an environmentally friendly Lead free bearing.This compound bearing, a "perfect oil-less bearing" that does not require any lubricant at all uses polytetrafluoroethylene (PTFE) resin, has excellent low friction characteristics and also optimizes metal properties such as strength and dimensional stability.
- Volume Discount
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Drymet LF Bushings - With shoulder, multilayer PTFE, LFF series.
Oiles
Drymet LF (LFF) shoulder bushing that can be used over a wide temperature range and has excellent chemical resistance. It is an oil-free bushing composed of three layers: Ethylene Tetrafluoride resin layer with filler, Sintered Copper layer and supporting metal. It can be used without lubrication and is very compact due to its thinness and light weight. It has a low coefficient of friction, stable under high load and low speed conditions, and has excellent wear resistance. When used in conjunction with lubricating oil, it can be used with a high PV value even in the medium and high speed range. It can be used over a wide range of temperatures, from low to high, and has excellent chemical resistance. Excellent dimensional stability, mechanical strength and thermal conductivity.
- Volume Discount
- CAD ：
- 2D
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Drymet ST Bushings - Polyacetal, multilayer, 70B series.
Oiles
Drymet ST (70B) straight bushings with compact design. It can be used without lubrication, has a low coefficient of friction and excellent load resistance. It has excellent wear resistance even in areas where oil film composition is difficult, such as constant back and forth movements, oscillating movements and frequent starts and stops. Since the bearing is thin, a compact design is possible. Excellent dimensional stability, mechanical strength and thermal conductivity.
- Volume Discount
- CAD ：
- 2D
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Daibest DBB01 Bushing - Straight, metal polymer, DBB series.
Daido Metal
Impregnated with our Daido's proprietary lubricant, these bearings are composed of lipophilic fibers and special filler material uniformly dispersed within polyacetal plastic resin, a plastic material offering excellent bearing characteristics.Type with steel backing DBB01 dry bearing
- Volume Discount
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Daidyne DDK05 Bushings - With shoulder, metal polymer, K5F series.
Daido Metal
This product is an environmentally friendly Lead free bearing. This compound bearing, a "perfect oil-less bearing" that does not require any lubricant at all uses polytetrafluoroethylene (PTFE) resin, has excellent low friction characteristics and also optimizes metal properties such as strength and dimensional stability.
- Volume Discount
Special Price Days to Ship: Same day or more Show Stock Products
-
Daislide Bushings - Straight, made of metal, HA series.
Daido Metal
Self-lubricating straight bushings manufactured with solid lubricant embedded in a copper alloy. No maintenance or lubrication required. Excellent wear resistance. Ideal for constant back and forth motion, intermittent motion and oscillating motion under high load and low speed conditions. Demonstrates excellent wear resistance properties in areas where oil film form is difficult. Has low coefficient of friction and can be used over a wide temperature range. Excellent corrosion resistance, impact resistance and chemical resistance. Can be used where lubrication is difficult, such as in liquids or generated gases.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
BEAREE Bushings - Shoulder sleeve type, PTFE, ARF series.
NTN
Smooth straight bushings made of high quality PTFE resin. With low coefficient of friction, wear resistance, anti-adhesion, heat resistance and chemical resistance. With little deformation due to compressive load. The ARF model has a flange/shoulder which allows it to receive axial loads, and the inner diameter is standardized from 4 mm to 50 mm. Resistant to chemical and oil environments.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Bushing 80 - Polyacetal, with shoulder, Series 80F.
Oiles
Polyacetal bushing, with shoulder, with excellent load capacity and wear resistance. Oil-free bushing, in which the lubricant is uniformly dispersed in the polyacetal resin. It has a low coefficient of friction and excellent speed characteristics and can be used without lubrication.
- Volume Discount
- CAD ：
- 2D
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Bushing 80 - Polyacetal, straight, series 80B.
Oiles
The straight polyacetal bushing is one of the most versatile series to be used in different applications. They have excellent load capacity and wear resistance. Oil-free bushing, in which the lubricant is evenly dispersed in the polyacetal resin. It has a low coefficient of friction and excellent speed characteristics, and can be used without lubrication.
- Volume Discount
- CAD ：
- 2D
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Cermet M Bushings - Straight, sintered with solid lubricant, Series 54B.
Oiles
Small diameter sintered straight bushing, with excellent working characteristics at high speeds. Self-lubricating bushing with a solid lubricant composed mainly of Molybdenum Disulfide evenly dispersed in the sintered alloy structure. It can work without additional lubrication, but when used together with lubricating oil, even better performance is obtained. It exhibits excellent wear resistance in places where oil film composition is difficult, such as continuous back-and-forth operation, intermittent operation and oscillating motion.
- Volume Discount
- CAD ：
- 2D
Special Price Days to Ship: Same day or more Show Stock Products
-
Thrust Bushing 500SP1 - With shoulder, copper alloy, SPFG series.
Oiles
Thrust bushing made of copper, with incorporated solid lubricant (graphite). With high performance in heavy loads and at low speeds. Excellent wear resistance in areas where it is difficult to form an oil film, such as reciprocating movements, oscillating movements and frequent starts and stops. Excellent chemical and corrosion resistance. Radial load and thrust load can be received simultaneously with only this bushing.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - Straight, iglidur® G.
igus
A straight oil-free bushing that can be used with shafts of any material, for linear or rotary applications. Operating temperature from -40°C to +130°C. Economical bushing suitable for a wide range of applications. Maintenance-free, no lubrication or greasing required. Excellent vibration damping properties. High abrasion and dust resistance. For medium and higher loads. For low to medium speeds. For rotary and oscillating movements.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
- On Sale Till 15/12/2024
Daibest DBX01 Bushing - Straight, DBX series.
Daido Metal
This bearing is filled with lubricant before installation, to which a small amount of lubricant is added at predetermined intervals to allow it to withstand long-term operation. The structure of this prelubricated bearing consists of spherical powdered bronze sintered onto a steel backing and polyacetal resin impregnated into the surface.
- Volume Discount
Special Price Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
BEARPHITE bushings - Sintered, oil impregnated.
NTN
Bushings manufactured with powder metallurgical technology. It is defined as a bushing in which oil is impregnated into a sintered porous body whose main component is metal powder. Excellent bushing performance in a wide range of applications. The service life of the bearings is long due to the stable lubrication function, and their performance is excellent at both low and high temperatures. Their quality, such as accuracy, density and oil content, is maintained by unique manufacturing technology and quality control. Ideal for recreational machines, power generation equipment, molding machines, industrial robots, etc.
- Volume Discount
Special Price Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - Straight, iglidur® J.
igus
Straight oil-free bushing suitable for high-speed applications, where the risk of stick-slip effect is reduced. Non-lubricated and maintenance-free bushing. Operating temperature from -50°C to +90°C. Low coefficient of friction in non-lubricated operation. Excellent vibration damping properties. Good chemical resistance. Ideal for shaft materials with low hardness. Low moisture absorption rate. Suitable for low and medium loads.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Oil Free Bushings - With shoulder, iglidur® X.
igus
Oil-free shoulder bushing with excellent resistance to high temperatures and chemicals. Excellent wear resistance and maintenance-free. Heat resistant during continuous operation -100 to +250°C (+315°C short term). Wide range of chemical resistance. High compressive strength. Low moisture absorption. Excellent wear resistance over the entire temperature range. Ideal for surface pressures up to 150 MPa.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Thermalloy Type D Bushings - Straight, made of metal, GB-C series.
Daido Metal
Straight copper bushing, oil-free, resistant to high temperatures up to 200°C). Resistant to foreign objects in the environment. Can work without additional lubrication, but when used together with lubricating oil, even better performance is obtained. Ideal for smooth movements and to avoid stick-slip effect. Good conductor of heat and electricity, so no heat build-up in the bushing.
- Volume Discount
Days to Ship: 8 Days or more -
BEAREE Bushings - Straight sleeve type, PTFE, ARE/AR series.
NTN
Smooth straight bushings made of high quality PTFE resin. With low coefficient of friction, wear resistance, anti-adhesion, heat resistance and chemical resistance. With little deformation due to compressive load.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Drymet LF Bushings - Flanged, multilayer (PTFE), LFG series.
Oiles
Drymet LF bushings incorporate an aluminum housing with a square flange ideal for time-saving assembly, thanks to its bolt-on design. These bushings have excellent wear resistance and a low coefficient of friction. They can be used with or without lubricant. The housing adds an anti-corrosion surface treatment, which makes it resistant to environments exposed to humidity.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day Show Stock Products
-
Bushings 2000 Oiles - Straight, multilayer sintered, CLB series.
Oiles
Bushings with excellent wear resistance that can be used in rotary or linear operation. Steel bushing incorporating a layer of special sintered sliding material. The sintered layer is manufactured by dispersing and sintering a solid lubricant composed mainly of graphite in a special copper alloy, and then impregnating it with oil. Since the solid lubricant is dispersed, it can be used in any direction of movement and has excellent performance even in micro-movements. Can be used without lubrication. Excellent load resistance, speed characteristics and wear resistance.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 15 Days or more -
Glytron F - PTFE bushings, straight, series 77B.
Oiles
Self-lubricating Glytron F (77B) bushing with anti-wear filler/solid lubricant added. It can be used completely without lubrication and has a low coefficient of static friction at start-up, which prevents stick-slip effect during operation. Even at high speeds. Can be used in a wide range of temperatures, from low to high (-200 to 200°C). Excellent chemical resistance and is suitable for the food industry.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 15/12/2024
Glytron SE - Polyphenylene sulfide bushings, straight, GEB series.
Oiles
Glytron SE (GEB) bushings are electrically conductive and compatible with miniature bearings. They can be used completely without lubrication. Since there is no big difference between the static friction coefficient and dynamic friction coefficient, it has stable friction characteristics. Can be used in a wide range of temperatures, from low to high. Can be used with any type of rotating linear shaft. Provides conductivity at antistatic level.
- Volume Discount
- CAD ：
- 2D
Special Price Days to Ship: Same day or more Show Stock Products
-
Oil Free Bushings - With shoulder, iglidur® G.
igus
An oil-free shoulder bushing that can be used with shafts of any material, for linear or rotary applications. Operating temperature from -40°C to +130°C. Economical bushing suitable for a wide range of applications. Maintenance-free, no lubrication or greasing required. Excellent vibration damping properties. High abrasion and dust resistance. For medium and higher loads. For low to medium speeds. For rotary and oscillating movements.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 7 Days or more -
Oil Free Bushings - With shoulder, iglidur® J.
igus
Oil-free shoulder bushing suitable for high-speed applications, where the risk of stick-slip effect is reduced. Non-lubricated and maintenance-free bushing. Operating temperature from -50°C to +90°C. Low coefficient of friction in non-lubricated operation. Excellent vibration damping properties. Good chemical resistance. Ideal for shaft materials with low hardness. Low moisture absorption rate. Suitable for low and medium loads.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type |
| Metallic |
| Bushing Material |
| I.D. d(mm) |
| I.D. d(inch) |
| O.D. D(mm) |
| O.D. D(inch) |
| Overall Length L(mm) |
| Overall Length L(inch) |
| Maximum Allowable PV Value Range(N/mm2•m/s) |
| Maximum Allowable PV Value(N/mm2•m/s) |
| Max. Allowable Surface Pressure P(N/mm2) |
| Max. Allowable Velocity V(m/s) |
| Housing Style |
| Housing Material |
| Length Type |
| Mounting Shaft Fits |
| Mounting Hole Fits |
| Thickness T(mm) |
| Lubrication Condition |
| Environment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | Oiles | Oiles | Oiles | Oiles | Daido Metal | Oiles | Oiles | Daido Metal | Daido Metal | Daido Metal | NTN | Oiles | Oiles | Oiles | Oiles | igus | Daido Metal | NTN | igus | igus | Daido Metal | NTN | Oiles | Oiles | Oiles | Oiles | igus | igus |
| Product Series | Daidyne DDK05 Bushings - Straight, metal polymer, K5B series. | Drymet LF Bushings - With shoulder, multilayer PTFE, LFF series. | Daibest DBB01 Bushing - Straight, metal polymer, DBB series. | Daidyne DDK05 Bushings - With shoulder, metal polymer, K5F series. | Cermet M Bushings - Straight, sintered with solid lubricant, Series 54B. | Thrust Bushing 500SP1 - With shoulder, copper alloy, SPFG series. | Thermalloy Type D Bushings - Straight, made of metal, GB-C series. | BEAREE Bushings - Straight sleeve type, PTFE, ARE/AR series. | Drymet LF Bushings - Flanged, multilayer (PTFE), LFG series. | Bushings 2000 Oiles - Straight, multilayer sintered, CLB series. | Glytron SE - Polyphenylene sulfide bushings, straight, GEB series. | |||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Days to Ship |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day
Show Stock Products | 15 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 7 Days or more | 8 Days or more |
| Type | Straight | Shouldered | Straight | Straight | Straight | Shouldered | Straight | Straight | Shouldered | Straight | Shouldered | Shouldered | Straight | Straight | Shouldered | Straight | Straight | Straight / Flanged | Straight | Shouldered | Straight | Straight | Flanged | Straight | Straight | Straight | Shouldered | Shouldered |
| Metallic | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Bushing Material | - | - | Sintered Bronze with PTFE | Graphite Impregnated Brass / Sintered Bronze with PTFE | Sintered Bronze with PTFE | Sintered Bronze with PTFE | - | Polyacetal | Sintered Bronze with PTFE | - | - | - | - | - | - | - | Polyacetal | - | - | - | - | - | Sintered Bronze with PTFE | - | - | - | - | - |
| I.D. d(mm) | 6 ～ 170 | 6 ～ 120 | 3 ～ 160 | 5 ～ 100 | 3 ～ 160 | 3 ～ 60 | 5 ～ 160 | 5 ～ 100 | 3 ～ 60 | 6 ～ 160 | 4 ～ 50 | 2 ～ 50 | 2 ～ 50 | 3 ～ 30 | 6 ～ 80 | 1.5 ～ 75 | 10 ～ 85 | 3 ～ 25 | 2 ～ 25 | 2 ～ 60 | 6 ～ 45 | 3 ～ 50 | 16 ～ 30 | 16 ～ 80 | 3 ～ 50 | 3 ～ 30 | 3 ～ 100 | 3 ～ 55 |
| I.D. d(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D. D(mm) | 10 ～ 190 | 10 ～ 140 | 5 ～ 165 | 7 ～ 105 | 5 ～ 165 | 4.6 ～ 65 | 7 ～ 165 | 7 ～ 105 | 4.6 ～ 65 | 10 ～ 180 | 7 ～ 60 | 4 ～ 55 | 4 ～ 55 | 6 ～ 40 | 10 ～ 96 | 3 ～ 80 | 13 ～ 90 | 5 ～ 30 | 3.5 ～ 28 | 4 ～ 65 | 10 ～ 55 | 6 ～ 60 | 28 ～ 45 | 22 ～ 96 | 6 ～ 60 | 6 ～ 35 | 4.5 ～ 105 | 4.5 ～ 60 |
| O.D. D(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall Length L(mm) | 8 ～ 150 | 10 ～ 100 | 3 ～ 100 | 5 ～ 95 | 3 ～ 100 | 3 ～ 60 | 4 ～ 125 | 4 ～ 90 | 3 ～ 60 | 8 ～ 150 | 6 ～ 60 | 2 ～ 50 | 2 ～ 50 | 3 ～ 40 | 11 ～ 90 | 2 ～ 60 | 10 ～ 80 | 2 ～ 25 | 2.5 ～ 30 | 3 ～ 40 | 6 ～ 50 | 5 ～ 50 | 37 ～ 64 | 16 ～ 100 | 3 ～ 50 | 5 ～ 30 | 2 ～ 50 | 3 ～ 50 |
| Overall Length L(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Allowable PV Value Range(N/mm2•m/s) | 1.1 to 2.0 | 1.1 to 2.0 | 2.1 to 5.0 | 1.1 to 2.0 | 2.1 to 5.0 | 2.1 to 5.0 | 2.1 to 5.0 | 2.1 to 5.0 | 1.1 to 2.0 | 1.1 to 2.0 | 0.3 to 1.0 | 2.1 to 5.0 | 2.1 to 5.0 | 1.1 to 2.0 | 1.1 to 2.0 | 0.3 to 1.0 | 2.1 to 5.0 | 1.1 to 2.0 | 0.3 to 1.0 | 1.1 to 2.0 | - | 0.3 to 1.0 | 2.1 to 5.0 | 1.1 to 2.0 | 0.3 to 1.0 | 0.3 to 1.0 | 0.3 to 1.0 | 0.3 to 1.0 |
| Maximum Allowable PV Value(N/mm2•m/s) | 1.65 | 1.65 | 3.6 | 1.65 | 3.6 | 3.6 | 3.25 | 3.25 | 1.72 | 1.65 | 1 | 2.45 | 2.45 | 1.65 | 1.65 | 0.42 | - | 0.83 | 0.34 | 1.32 | - | 1 | 3.6 | 1.63 | 1 | 0.65 | 0.42 | 0.34 |
| Max. Allowable Surface Pressure P(N/mm2) | 29 | 29 | 49 | 24.5 | 49 | 49 | 24.5 | 24.5 | 137 | 29 | - | 17.5 | 17.5 | 10 | 29 | 80 | - | 7 | 35 | 150 | - | - | 49 | 24.5 | 7 | 14.5 | 80 | 35 |
| Max. Allowable Velocity V(m/s) | 0.5 | 0.5 | 0.65 | 0.4 | 0.65 | 0.65 | 1.15 | 1.15 | 1 | 0.5 | - | 0.85 | 0.85 | 0.85 | 0.5 | 1 | - | 1.83 | 1.5 | 1.5 | - | - | 0.65 | 0.5 | 1.65 | 2.5 | 1 | 1.5 |
| Housing Style | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Square Flanged | - | - | - | - | - |
| Housing Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Aluminum | - | - | - | - | - |
| Length Type | Single | Single | Single | Single | - | Single | Single | - | - | - | Single | Single | Single | Single | Single | - | - | Single | - | - | - | Single | Single | Single | Single | Single | - | - |
| Mounting Shaft Fits | e7 | e7 | - | h7 | - | - | h7 | - | - | - | h6 | h7 | h7 | h7 | e7 | h9 | - | - | h9 | h9 | - | h6 | e7 | g6 | h6 | g6 | h9 | h9 |
| Mounting Hole Fits | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | M7 | H7 | H7 | H7 | H7 | H7 | H7 | - | H7 | H7 | - | M7 | H7 | H6 | H7 | H7 | H7 | H7 |
| Thickness T(mm) | - | - | - | - | 1 ～ 2.5 | - | - | 1 ～ 2.5 | 0.8 ～ 2.5 | - | 1.5 ～ 5 | - | - | - | - | - | 1.5 ～ 2.5 | 1 ～ 3 | - | - | - | - | - | - | - | - | - | - |
| Lubrication Condition | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated |
| Environment | Standard / Heat Resistant / Foreign Object Resistant | Standard / Heat Resistant / Foreign Object Resistant | Standard / In Oil | Standard / Heat Resistant / In Oil | Standard / In Oil | Standard / In Oil | Standard / In Oil | Vibration Resistant / In Water | Standard / In Oil | Standard / Heat Resistant / Foreign Object Resistant | Standard / Heat Resistant / In Oil / In Water / In Seawater / In Chemical | Standard | Standard | Standard | Standard / Heat Resistant / Foreign Object Resistant | Standard / Foreign Object Resistant / Vibration Resistant / In Oil | Standard / Foreign Object Resistant / Vibration Resistant / In Water | Standard | Standard / Foreign Object Resistant / Vibration Resistant / In Oil / In Water / In Seawater | Standard / Heat Resistant / Foreign Object Resistant / Vibration Resistant / In Oil / In Water / In Seawater / In Chemical | Foreign Object Resistant / In Water | Standard / Heat Resistant / In Oil / In Water / In Seawater / In Chemical | Standard / In Oil / In Water | Standard / Vibration Resistant | Standard / Heat Resistant / In Water / In Seawater / In Chemical | Standard / In Water / In Seawater / In Chemical | Standard / Foreign Object Resistant / Vibration Resistant / In Oil | Standard / Foreign Object Resistant / Vibration Resistant / In Oil / In Water / In Seawater |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Metallic
-
Bushing Material
- Graphite Impregnated Brass
- Bronze
- Cast Iron
- Polyacetal
- PTFE
- Fluororesin
- Iglide J®
- DryLin® R
- Sintered Bronze with PTFE
- Frelon Gold®
-
Metric / Inch
- metric
-
I.D. d(mm)
-
I.D. d(inch)
-
O.D. D(mm)
-
O.D. D(inch)
- 0.13 in (1/8")
- 0.19 in (3/16")
- 0.25 in (1/4")
- 0.31 in (5/16")
- 0.38 in (3/8")
- 0.50 in (1/2")
- 0.63 in (5/8")
- 0.69 in (11/16")
- 0.75 in (3/4")
- 0.81 in (13/16")
- 0.88 in (7/8")
- 0.94 in (15/16")
- 1.00 in (1")
- 1.13 in (1-1/8")
- 1.25 in (1-1/4")
- 1.50 in (1-1/2")
- 1.56 in (1-9/16")
- 1.75 in (1-3/4")
- 1.81 in (1-13/16")
- 2.00 in (2")
- 2.38 in (2-3/8")
- 3.00 in (3")
- 3.75 in (3-3/4")
- 4.50 in (4-1/2")
- 6.00 in (6")
-
Overall Length L(mm)
- 2
- 02
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 3
- 03
- 3.5
- 3.8
- 4
- 04
- 4.4
- 4.5
- 4.8
- 05
- 5
- 5.5
- 5.9
- 06
- 6
- 6.5
- 7
- 7.5
- 08
- 8
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 20
- 21
- 21.5
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31.5
- 32
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 42
- 42.5
- 45
- 47
- 48
- 50
- 51
- 52
- 55
- 56
- 57
- 58
- 59
- 60
- 62
- 63
- 64
- 65
- 67
- 67.5
- 68
- 69
- 70
- 73
- 74
- 75
- 76
- 77
- 78
- 80
- 81
- 82
- 85
- 86
- 90
- 95
- 97
- 100
- 103
- 108
- 110
- 112
- 115
- 120
- 125
- 128
- 140
- 141
- 150
- 158
- 170
- 175
- 188
- 200
- 240
-
Overall Length L(inch)
- 0.25 in (1/4")
- 0.31 in (5/16")
- 0.38 in (3/8")
- 0.50 in (1/2")
- 0.56 in (9/16")
- 0.63 in (5/8")
- 0.75 in (3/4")
- 0.84 in (27/32")
- 0.88 in (7/8")
- 1.00 in (1")
- 1.03 in (1-1/32")
- 1.25 in (1-1/4")
- 1.33 in (1-5/16")
- 1.50 in (1-1/2")
- 1.63 in (1-5/8")
- 1.75 in (1-3/4")
- 1.78 in (1-25/32")
- 2.19 in (2-3/16")
- 2.25 in (2-1/4")
- 2.38 in (2-3/8")
- 2.50 in (2-1/2")
- 2.63 in (2-5/8")
- 2.81 in (2-13/16")
- 2.95 in (2-61/64")
- 2.98 in (2-63/64")
- 3.00 in (3")
- 3.09 in (3-3/32")
- 3.25 in (3-1/4")
- 4.00 in (4")
- 4.13 in (4-1/8")
- 4.50 in (4-1/2")
- 5.00 in (5")
- 6.00 in (6")
- 8.00 in (8")
-
Maximum Allowable PV Value Range(N/mm2•m/s)
-
Maximum Allowable PV Value(N/mm2•m/s)
-
Max. Allowable Surface Pressure P(N/mm2)
-
Max. Allowable Velocity V(m/s)
-
Housing Style
-
Housing Material
-
Length Type
-
Mounting Shaft Fits
-
Mounting Hole Fits
-
Thickness T(mm)
-
Lubrication Condition
-
Environment
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
- 13 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy