(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Plain & Self-Lubricating Bearings（Environment：Foreign Object Resistant）
Since bearings usually receive a lot of frictional resistance that generates heat, lubricants such as oil or grease are used to prevent the seizing or abnormal wear that this frictional heat could otherwise cause. Lubrication-free bushings don't need lubricating oil because the bearing body has a lubricating structure made possible by lubricating oil in the bearing body, or by embedded solid lubricant or the like. Since they don't need lubricating oil, lubrication-free bushings are often used for applications such as precision machinery that makes lubricating oil refilling difficult, and equipment with poor affinity to oil. They also greatly reduce maintenance costs by eliminating the need for regular lubrication and enabling stable operation over long periods. Lubrication-free bushings come in a variety of shapes that can be used for different applications as needed. Examples include straight bushings, collar bushings, flange bushings and housing bushings.
Type
-
Straight -
Shouldered -
Flanged -
Pillow Block -
Open Type
-
Bushing 500SP1 - Straight, copper alloy, SPB series.
Oiles
Straight oil-free bushing made of copper, with solid lubricant incorporated (graphite). Excellent wear resistance in areas where it is difficult to form an oil film, such as reciprocating movements, oscillating movements and frequent starts and stops. Excellent chemical and corrosion resistance but not recommended for use with sea water.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Bushing 500SP1 - With shoulder, copper alloy, SPF series.
Oiles
Oil-free bushing with shoulder made of Copper, with incorporated solid lubricant (Graphite). With high performance in heavy loads and at low speeds. Excellent wear resistance in areas where it is difficult to form an oil film, such as reciprocating movements, oscillating movements and frequent starts and stops. Excellent chemical and corrosion resistance.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Daislide Bushings - Straight, made of metal, HA series.
Daido Metal
Self-lubricating straight bushings manufactured with solid lubricant embedded in a copper alloy. No maintenance or lubrication required. Excellent wear resistance. Ideal for constant back and forth motion, intermittent motion and oscillating motion under high load and low speed conditions. Demonstrates excellent wear resistance properties in areas where oil film form is difficult. Has low coefficient of friction and can be used over a wide temperature range. Excellent corrosion resistance, impact resistance and chemical resistance. Can be used where lubrication is difficult, such as in liquids or generated gases.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Thrust Bushing 500SP1 - With shoulder, copper alloy, SPFG series.
Oiles
Thrust bushing made of copper, with incorporated solid lubricant (graphite). With high performance in heavy loads and at low speeds. Excellent wear resistance in areas where it is difficult to form an oil film, such as reciprocating movements, oscillating movements and frequent starts and stops. Excellent chemical and corrosion resistance. Radial load and thrust load can be received simultaneously with only this bushing.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Thermalloy Type D Bushings - Straight, made of metal, GB-C series.
Daido Metal
Straight copper bushing, oil-free, resistant to high temperatures up to 200°C). Resistant to foreign objects in the environment. Can work without additional lubrication, but when used together with lubricating oil, even better performance is obtained. Ideal for smooth movements and to avoid stick-slip effect. Good conductor of heat and electricity, so no heat build-up in the bushing.
- Volume Discount
Days to Ship: 8 Days or more -
Oil Free Bushings - Straight, iglidur® G.
igus
A straight oil-free bushing that can be used with shafts of any material, for linear or rotary applications. Operating temperature from -40°C to +130°C. Economical bushing suitable for a wide range of applications. Maintenance-free, no lubrication or greasing required. Excellent vibration damping properties. High abrasion and dust resistance. For medium and higher loads. For low to medium speeds. For rotary and oscillating movements.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Oil Free Bushings - With shoulder, iglidur® G.
igus
An oil-free shoulder bushing that can be used with shafts of any material, for linear or rotary applications. Operating temperature from -40°C to +130°C. Economical bushing suitable for a wide range of applications. Maintenance-free, no lubrication or greasing required. Excellent vibration damping properties. High abrasion and dust resistance. For medium and higher loads. For low to medium speeds. For rotary and oscillating movements.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 7 Days or more -
Oil Free Bushings - Straight, iglidur® J.
igus
Straight oil-free bushing suitable for high-speed applications, where the risk of stick-slip effect is reduced. Non-lubricated and maintenance-free bushing. Operating temperature from -50°C to +90°C. Low coefficient of friction in non-lubricated operation. Excellent vibration damping properties. Good chemical resistance. Ideal for shaft materials with low hardness. Low moisture absorption rate. Suitable for low and medium loads.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Oil Free Bushings - With shoulder, iglidur® J.
igus
Oil-free shoulder bushing suitable for high-speed applications, where the risk of stick-slip effect is reduced. Non-lubricated and maintenance-free bushing. Operating temperature from -50°C to +90°C. Low coefficient of friction in non-lubricated operation. Excellent vibration damping properties. Good chemical resistance. Ideal for shaft materials with low hardness. Low moisture absorption rate. Suitable for low and medium loads.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Oil Free Bushings - With shoulder, iglidur® X.
igus
Oil-free shoulder bushing with excellent resistance to high temperatures and chemicals. Excellent wear resistance and maintenance-free. Heat resistant during continuous operation -100 to +250°C (+315°C short term). Wide range of chemical resistance. High compressive strength. Low moisture absorption. Excellent wear resistance over the entire temperature range. Ideal for surface pressures up to 150 MPa.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Daibest DBX01 Bushing - Straight, DBX series.
Daido Metal
This bearing is filled with lubricant before installation, to which a small amount of lubricant is added at predetermined intervals to allow it to withstand long-term operation. The structure of this prelubricated bearing consists of spherical powdered bronze sintered onto a steel backing and polyacetal resin impregnated into the surface.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type |
| Metallic |
| Bushing Material |
| I.D. d(mm) |
| I.D. d(inch) |
| O.D. D(mm) |
| O.D. D(inch) |
| Overall Length L(mm) |
| Overall Length L(inch) |
| Maximum Allowable PV Value Range(N/mm2•m/s) |
| Maximum Allowable PV Value(N/mm2•m/s) |
| Max. Allowable Surface Pressure P(N/mm2) |
| Max. Allowable Velocity V(m/s) |
| Housing Style |
| Housing Material |
| Length Type |
| Mounting Shaft Fits |
| Mounting Hole Fits |
| Thickness T(mm) |
| Lubrication Condition |
| Environment |
|
|
|
|
|
|
|
|
|
|
| |
| Brand | Oiles | Oiles | Daido Metal | Oiles | Daido Metal | igus | igus | igus | igus | igus | Daido Metal |
| Product Series | Thrust Bushing 500SP1 - With shoulder, copper alloy, SPFG series. | Thermalloy Type D Bushings - Straight, made of metal, GB-C series. | |||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 7 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
| Type | Straight | Shouldered | Straight | Shouldered | Straight | Straight | Shouldered | Straight | Shouldered | Shouldered | Straight |
| Metallic | - | - | - | - | - | - | - | - | - | - | - |
| Bushing Material | - | - | - | - | - | - | - | - | - | - | Polyacetal |
| I.D. d(mm) | 6 ～ 170 | 6 ～ 120 | 6 ～ 160 | 6 ～ 80 | 6 ～ 45 | 1.5 ～ 75 | 3 ～ 100 | 2 ～ 25 | 3 ～ 55 | 2 ～ 60 | 10 ～ 85 |
| I.D. d(inch) | - | - | - | - | - | - | - | - | - | - | - |
| O.D. D(mm) | 10 ～ 190 | 10 ～ 140 | 10 ～ 180 | 10 ～ 96 | 10 ～ 55 | 3 ～ 80 | 4.5 ～ 105 | 3.5 ～ 28 | 4.5 ～ 60 | 4 ～ 65 | 13 ～ 90 |
| O.D. D(inch) | - | - | - | - | - | - | - | - | - | - | - |
| Overall Length L(mm) | 8 ～ 150 | 10 ～ 100 | 8 ～ 150 | 11 ～ 90 | 6 ～ 50 | 2 ～ 60 | 2 ～ 50 | 2.5 ～ 30 | 3 ～ 50 | 3 ～ 40 | 10 ～ 80 |
| Overall Length L(inch) | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Allowable PV Value Range(N/mm2•m/s) | 1.1 to 2.0 | 1.1 to 2.0 | 1.1 to 2.0 | 1.1 to 2.0 | - | 0.3 to 1.0 | 0.3 to 1.0 | 0.3 to 1.0 | 0.3 to 1.0 | 1.1 to 2.0 | 2.1 to 5.0 |
| Maximum Allowable PV Value(N/mm2•m/s) | 1.65 | 1.65 | 1.65 | 1.65 | - | 0.42 | 0.42 | 0.34 | 0.34 | 1.32 | - |
| Max. Allowable Surface Pressure P(N/mm2) | 29 | 29 | 29 | 29 | - | 80 | 80 | 35 | 35 | 150 | - |
| Max. Allowable Velocity V(m/s) | 0.5 | 0.5 | 0.5 | 0.5 | - | 1 | 1 | 1.5 | 1.5 | 1.5 | - |
| Housing Style | - | - | - | - | - | - | - | - | - | - | - |
| Housing Material | - | - | - | - | - | - | - | - | - | - | - |
| Length Type | Single | Single | - | Single | - | - | - | - | - | - | - |
| Mounting Shaft Fits | e7 | e7 | - | e7 | - | h9 | h9 | h9 | h9 | h9 | - |
| Mounting Hole Fits | H7 | H7 | H7 | H7 | - | H7 | H7 | H7 | H7 | H7 | H7 |
| Thickness T(mm) | - | - | - | - | - | - | - | - | - | - | 1.5 ～ 2.5 |
| Lubrication Condition | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated |
| Environment | Foreign Object Resistant | Foreign Object Resistant | Foreign Object Resistant | Foreign Object Resistant | Foreign Object Resistant | Foreign Object Resistant | Foreign Object Resistant | Foreign Object Resistant | Foreign Object Resistant | Foreign Object Resistant | Foreign Object Resistant |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Metallic
-
Bushing Material
- Graphite Impregnated Brass
- Bronze
- Cast Iron
- Polyacetal
- PTFE
- Fluororesin
- Iglide J®
- DryLin® R
- Sintered Bronze with PTFE
- Frelon Gold®
-
Metric / Inch
- metric
-
I.D. d(mm)
-
I.D. d(inch)
-
O.D. D(mm)
-
O.D. D(inch)
- 0.13 in (1/8")
- 0.19 in (3/16")
- 0.25 in (1/4")
- 0.31 in (5/16")
- 0.38 in (3/8")
- 0.50 in (1/2")
- 0.63 in (5/8")
- 0.69 in (11/16")
- 0.75 in (3/4")
- 0.81 in (13/16")
- 0.88 in (7/8")
- 0.94 in (15/16")
- 1.00 in (1")
- 1.13 in (1-1/8")
- 1.25 in (1-1/4")
- 1.50 in (1-1/2")
- 1.56 in (1-9/16")
- 1.75 in (1-3/4")
- 1.81 in (1-13/16")
- 2.00 in (2")
- 2.38 in (2-3/8")
- 3.00 in (3")
- 3.75 in (3-3/4")
- 4.50 in (4-1/2")
- 6.00 in (6")
-
Overall Length L(mm)
- 2
- 02
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 3
- 03
- 3.5
- 3.8
- 4
- 04
- 4.4
- 4.5
- 4.8
- 05
- 5
- 5.5
- 5.9
- 06
- 6
- 6.5
- 7
- 7.5
- 08
- 8
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 20
- 21
- 21.5
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31.5
- 32
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 42
- 42.5
- 45
- 47
- 48
- 50
- 51
- 52
- 55
- 56
- 57
- 58
- 59
- 60
- 62
- 63
- 64
- 65
- 67
- 67.5
- 68
- 69
- 70
- 73
- 74
- 75
- 76
- 77
- 78
- 80
- 81
- 82
- 85
- 86
- 90
- 95
- 97
- 100
- 103
- 108
- 110
- 112
- 115
- 120
- 125
- 128
- 140
- 141
- 150
- 158
- 170
- 175
- 188
- 200
- 240
-
Overall Length L(inch)
- 0.25 in (1/4")
- 0.31 in (5/16")
- 0.38 in (3/8")
- 0.50 in (1/2")
- 0.56 in (9/16")
- 0.63 in (5/8")
- 0.75 in (3/4")
- 0.84 in (27/32")
- 0.88 in (7/8")
- 1.00 in (1")
- 1.03 in (1-1/32")
- 1.25 in (1-1/4")
- 1.33 in (1-5/16")
- 1.50 in (1-1/2")
- 1.63 in (1-5/8")
- 1.75 in (1-3/4")
- 1.78 in (1-25/32")
- 2.19 in (2-3/16")
- 2.25 in (2-1/4")
- 2.38 in (2-3/8")
- 2.50 in (2-1/2")
- 2.63 in (2-5/8")
- 2.81 in (2-13/16")
- 2.95 in (2-61/64")
- 2.98 in (2-63/64")
- 3.00 in (3")
- 3.09 in (3-3/32")
- 3.25 in (3-1/4")
- 4.00 in (4")
- 4.13 in (4-1/8")
- 4.50 in (4-1/2")
- 5.00 in (5")
- 6.00 in (6")
- 8.00 in (8")
-
Maximum Allowable PV Value Range(N/mm2•m/s)
-
Maximum Allowable PV Value(N/mm2•m/s)
-
Max. Allowable Surface Pressure P(N/mm2)
-
Max. Allowable Velocity V(m/s)
-
Housing Style
-
Housing Material
-
Length Type
-
Mounting Shaft Fits
-
Mounting Hole Fits
-
Thickness T(mm)
-
Lubrication Condition
-
Environment
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
- 13 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy