(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Days to Ship: | 10 Days or more |
---|
Nabeya
[Features]
· 6830: SS400/6830NI: SUS304, 6830: Zinc-plated toggle-down clamp 6830. 6830S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.
Days to Ship: | 8 Days or more |
---|
Screw Jack - S45C Steel, 40-250 mm Height, SJK Series
MISUMI
SJK-K model is furnished with a through hole in the center of the jack to allow the jack to be fastened by a bolt or the like. SJK model can be used with No. E-175A attachment.
Days to Ship: | Same day or more |
---|
Show Stock Products
Nabeya
6844: SS400/6844NI: SUS304/6844: Zinc-plated toggle side clamp 6844.
Days to Ship: | 10 Days or more |
---|
Heavy Duty Toggle Side Clamp 6842
Nabeya
Can be used for either pushing or pulling. Clamping screw and rubber cap attached.
Days to Ship: | 10 Days or more |
---|
Reference Seat (Flange Provided)
Nabeya
[Features]
· Specification with air holes can be used to verify seating (O-ring not included).
· The diameter of the workpiece support is large, allowing load from the top to be firmly supported
Days to Ship: | 8 Days or more |
---|
Flange Locating Pin (Diamond Pin)
Nabeya
Because a flange is included, it can be secured with a screw from the top. Dimension A in 0.1 increments and dimension A tolerance specially corresponding to h6, m6 and p6 is possible. It is a standard tip tapered shape. Diamond pin allows selection of the orientation of the diamond. (PFD/PFDS type)
Days to Ship: | 8 Days or more |
---|
MISUMI
Convenient for supporting various clamps. Two or three can be connected if a single screw is not effective or is lacking in height. The use of an attachment makes it easy to support unusually shaped objects.
Days to Ship: | 8 Days or more |
---|
Wedge Clamp Set (for T-Shaped Grooves)
Nabeya
Wedge clamp set for T-grooves, flat type.
Days to Ship: | 8 Days or more |
---|
Nabeya
[Features]
· Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.
· Lifting prevention (generates force in the downward direction).
· Ideal for thin workpieces.
· Dovetail groove can withstand lateral force.
· Free Mounting Position
Days to Ship: | 10 Days or more |
---|
Nabeya
Clamp support screw jack is convenient for supporting a variety of clamps. When one unit is insufficient in operation or height, two or three units can be stacked together. (Only for same sizes) The attachment is convenient for supporting irregular objects.
Days to Ship: | 8 Days or more |
---|
Adjustment Bolt for Quick Lock
Nabeya
Parts for Quick Lock.
For complete product overview and details on Adjustment Bolt for Quick Lock see the sections below:
Days to Ship: | 11 Days or more |
---|
Nabeya
An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.
Days to Ship: | 8 Days or more |
---|
Universal Clamp Semi-Cylindrical Sealing Washer
Nabeya
[Features]
· Parts for universal clamps.
· The swivel pad fits on the workpiece and clamping surface for vertical tightening.
· Although this product is equipped with T-nuts, it can also be used with them removed
Days to Ship: | 8 Days or more |
---|
Nabeya
Convenient for fixing workpieces thanks to its widened base and lengthened screw.
Days to Ship: | 8 Days or more |
---|
Height Setting Jack (with Magnetic Base)
Nabeya
[Features]
· Hole included in upper center (φ12).
· Attachment for E-756 jack can also be used.
· Bearing is embedded in thread component.
· Includes magnetic base
Days to Ship: | 11 Days or more |
---|
Screw Jack - S45C Steel, 40-150 mm Height, SJK Series
Nabeya
· Attachment for No. E-9175A can be used for SJK type.
· SJK-K type is provided with through holes in the center of the jack, making it possible to fix the jacks using bolts, etc.
Days to Ship: | 8 Days or more |
---|
Q Lock (Screw Type) Clamp Bushing
Nabeya
A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.
Days to Ship: | 8 Days or more |
---|
Locating Pin (Adjustable Round Pin)
Nabeya
[Features]
· A single wrench with the positioning repeatability of 5 μm.
· Zero clearance with the reference hole and use of a high precision positioning pin makes it ideal for replacing plates or small-scale generalization.
· The locating adjustment pin is a manually operated high-precision positioning pin whose diameter expands and contracts.
· Locating adjustable pin creates zero gap.
Days to Ship: | 10 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Magnetic Chucks Attachment Set
Nabeya
Metal fittings for fixing magnetic chucks to tables.
Days to Ship: | 10 Days or more |
---|
Slide Clamp A Type (Set of 2)【2 Pieces Per Package】
Super Tool
[Features]
· The tip of the jaw is engraved with a rack to clamp the workpiece downwards.
· Operation consists of inserting the wrench, and tightening in order to clamp the workpiece by the clamp head sliding along a 45° inclination.
Days to Ship: | 8 Days or more |
---|
Screw Support - Long Stroke Type (2 Pcs 1 Set)
Super Tool
[Features]
· By providing intermediate male screws, a long stroke has been achieved. (1.5 to 2 times comparison by manufacturer)
· By providing intermediate male screws, a long stroke has been achieved. (1.5 to 2 times comparison by manufacturer)
· Turns an intermediate male screw to resolve problems that can occur when turning the male screw when a load is applied, such as scratches on the workpiece and slipped alignment.
· When adjusting intermediate male screws, the screws in the upper and lower parts can be manipulated with minimal force, since the direction is the same and the pitch is different.
· A lock screw (locking piece) to lock male threads for loosening prevention.
[Applications]
· For support of heavy objects, height adjustment of clamps, and suppression of chattering during cutting.
· It is also ideal for support of heavy objects, height adjustment of clamps, and suppression of chattering during cutting.
Days to Ship: | 8 Days or more |
---|
ESCO
[Applications]
·Lever action allows quick clamping to workpieces
Days to Ship: | 9 Days or more |
---|
Toggle clamp, type: Horizontal lever/lower presser type, body material: Stainless steel
ESCO
[Specifications]
·Esco, clamping parts (for manual tightening), toggle clamps.
Days to Ship: | 9 Days or more |
---|
Toggle clamp, material: Stainless steel, type: Vertical latch type
ESCO
[Specifications]
·Esco, clamping parts (for manual tightening), toggle clamps.
· Material: Stainless steel
·Model: Vertical latch type
Days to Ship: | 9 Days or more |
---|
MISUMI
Made of S45C (raw material).
For complete product overview and details on Round Seat, Flat Model see the sections below:
Days to Ship: | 12 Days or more |
---|
Round Seat, Counter Bores Mounted Model
MISUMI
Made of S45C (raw material).
For complete product overview and details on Round Seat, Counter Bores Mounted Model see the sections below:
Days to Ship: | 12 Days or more |
---|
TAK Clamp (Eccentric Washer Cam Clamp)
MISUMI
Easy clamping just by fastening bolts. For processing many small workpieces
Days to Ship: | 8 Days or more |
---|
High Lock Screw【1-5 Pieces Per Package】
MISUMI
Firmly clamp workpieces without damaging them
Days to Ship: | 8 Days or more |
---|
MISUMI
Supplied with a hex bar wrench. Complete fastening with sliding mechanism. One-point attachment and detachment allow time reduction. For full surface machining of the work piece and perforating. Complete heat treatment allows semi-permanent use. Floating prevention mechanism type.
Days to Ship: | 8 Days or more |
---|
Toa Adjust Clamp【2 Pieces Per Package】
MISUMI
Ideal for clamping thin workpieces. Fastening while depressing the toe (hook) keeps the workpiece from lifting up. Toe (hook) is quenched for durability.
Days to Ship: | 8 Days or more |
---|
MISUMI
Makes it easy to clamping to mold bases. Clamp and step block are connected to prevent loss. Oblong hole is open to allow for easy attachment and detachment from the side. Can be adjusted to 4 different heights by changing the position of the step block of the main unit.
Days to Ship: | 8 Days or more |
---|
Nabeya
Chips bite into in the aluminum base, leaving no scratches on the machine table. Lightweight as it is made of aluminum.
Days to Ship: | 10 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Nabeya
Flat jaw and angled handle for quick hold down clamp (medium).
Days to Ship: | 8 Days or more |
---|
Nabeya
[Features]
· Bar for Quick Lock.
· Annoying thread feeding when clamping is not necessary.
· A one-action clamp that adopts a cam lock mechanism
Days to Ship: | 11 Days or more |
---|
Nabeya
[Features]
· Check plate for Quick Lock.
· Annoying thread feeding when clamping is not necessary.
· A one-action clamp that adopts a cam lock mechanism
Days to Ship: | 11 Days or more |
---|
Clamp Part of Wedge Clamp (for T-Shaped Grooves)
Nabeya
Clamp part of wedge clamp for T-grooves, flat type.
Days to Ship: | 10 Days or more |
---|
Nabeya
An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.
Days to Ship: | 8 Days or more |
---|
Swing Clamp Height Adjusting Support
Nabeya
Of course, it can also be used for height adjustment in fixing workpieces. It can be used for both T-grooves and tap holes.
Days to Ship: | 8 Days or more |
---|
Nabeya
An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.
Days to Ship: | 8 Days or more |
---|
Nabeya
Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.
Days to Ship: | 10 Days or more |
---|
Days to Ship: | 10 Days or more |
---|
Days to Ship: | 10 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
| |||||||||||||||||||||||||||||||||||||||||||||
Brand | Nabeya | Nabeya | MISUMI | Nabeya | Nabeya | Nabeya | Nabeya | MISUMI | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | NEWSTRONG | Nabeya | Super Tool | Super Tool | ESCO | ESCO | ESCO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya | Nabeya |
Product Series | Toggle clamp, type: Horizontal lever/lower presser type, body material: Stainless steel | Toggle clamp, material: Stainless steel, type: Vertical latch type | |||||||||||||||||||||||||||||||||||||||||||
Days to Ship | 10 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 12 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 11 Days or more | 11 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy