(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Rectangular Connectors - D-Sub, Integrated Terminal Block, Screw and Press Terminals
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
Phoenix Contact make. Hood with integrated screw model terminal that allows for repeated connecting with a single driver.
- For Signal
- PLC
- EMI Countermeasure
- RS422
- RS232
- Screw Type
- Gold Plated
- Screw Lock
●The screw model terminal block wire connection allows for the wire connections to be changed as many times as you like. Therefore, it is ideal for inspection jigs etc.
● The cable outlet can be angled either right or left depending on the mounting direction of the hood.
· For wire connection, confirm that the screws are securely tightened and mount the hood before use.
· #4-40 inch screws for fixing to mating component are installed as standard. Replace with the included M2.6 screws when using with M2.6 screws.
(i)Caution
- 【We highly recommend using Industrial Network Cables】
1.Customizable RJ45 Industrial Ethernet Cable Assembly
2.M12-RJ45 Industrial Network Cables
3.M12-M12 Industrial Network Cables
Part Number
Configured Part Number is shown.
Specifications
| Model Number | Number of Cores | Type | Weight g |
| SUBCON9M-SH | 9 | Male (Pin) | 45.4 |
| SUBCON15M-SH | 15 | 52.8 | |
| SUBCON25M-SH | 25 | 70.4 | |
| SUBCON9F-SH | 9 | Female (Socket) | 44.9 |
| SUBCON15F-SH | 15 | 51.0 | |
| SUBCON25F-SH | 25 | 69.0 |
More Information
Specifications
| Item | Materials |
| Rated Voltage | 50 VAC / VDC or less |
| Rated Current | AC / DC 0.1 or less |
| Compatible Cable Finished Outer Diameter | Ø10 mm or less |
| Connectable Core Wire Size | Single Wire 0.14 ~ 1.5 mm2 / Stranded Wire 0.14 ~ 1.0 mm2 / AWG26 ~ 14 |
| Screw Tightening Torque | 0.4 Nm (4 kgf.cm) |
| Operating Temperature Range | -20°C ~ +75°C |
Material / Finish
| Item | Materials | Finish |
| Connector Insulator | PETP Resin | UL94V-0 |
| PC Board | Glass Epoxy Resin | UL94V-0 |
| Terminal Block Insulator | Polyamide Resin | UL94V-0 |
| Hood | ABS Resin | Nickel-plated |
| Part Number |
|---|
| SUBCON9M-SH |
| SUBCON15M-SH |
| SUBCON25M-SH |
Loading...
Compatible Wire Size
| Connector Type | Compatible Wire Size | ||
|---|---|---|---|
| AWG Size | Conductor Cross-Sectional Area (mm2) | ||
| Solder Connection Type | Finer than 20 | Less than 0.53 | |
| Pressure Weld Connection Type | 1.27 mm Pitch 28 Flat Cable | − | |
| High-density Solder Connection Type | 22 ~ 28 | 0.08 ~ 0.32 | |
| Terminal Block Built in Type | 14 ~ 26 | 2.0 ~ 1.5 | |
| High Current Type | For 10A | 16 ~ 12 | 0.3 ~ 1.25 |
| For 20A | 12 ~ 18 | 0.75 ~ 3.5 | |
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.
Panel Size
Solder Connection / Pressure Weld Connection Type
● Dimension Table
| Number of Cores | A±0.15 | B±0.2 | C±0.2 | ||
|---|---|---|---|---|---|
| High Current Type | High-density type | Others | |||
| - | 15 | 9 | 24.99 | 20.6 | 12.0 |
| 3 | 26 | 15 | 33.32 | 28.8 | 12.0 |
| 5 | 44 | 25 | 47.04 | 42.6 | 12.0 |
| 8 | 62 | 37 | 63.50 | 59.0 | 12.0 |
| - | 78 | 50 | 61.11 | 56.6 | 15.2 |
Mounting holes for panel front and rear mounting are common.
Pressure Weld Connection Type
a. Dimensions when mounting the connector from panel front
● Dimension Table
| Number of Cores | A1 | B1 |
|---|---|---|
| 9 | 24.99 | 22.00 |
| 15 | 33.32 | 30.30 |
| 25 | 47.04 | 44.00 |
| 37 | 63.05 | 60.50 |
b. Dimensions when mounting the connector from panel rear
● Dimension Table
| Number of Cores | A2 | B2 |
|---|---|---|
| 9 | 24.99 | 20.20 |
| 15 | 33.32 | 28.60 |
| 25 | 47.04 | 42.50 |
| 37 | 63.05 | 59.20 |
Contact Arrangement Diagram
| Shell Size Group | E | A | B | C | D |
|---|---|---|---|---|---|
| Standard Type |  |
 |
 |
 |
 |
| High-density type |  |
 |
 |
 |
 |
Basic Information
| Connector Shape | Square Type | D/E/F | Dsub | Application | Board to Cable |
|---|---|---|---|---|---|
| Allowable Current(A) | 1 | Allowable Voltage(V) | 60 | Wire connection method | Screw-fastened |
| Connection direction | Straight | IP Rating | N/A | Detaching Method | Others |
| Note Voltage DC | 60V | Note Voltage AC | 60V |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Rectangular Connectors - D-Sub, Crimp Housing
- Rectangular Connectors - D-Sub, Plug to Socket Convertible
- Rectangular Connectors - Han, Straight, Single-Lever Hood, Waterproof
- Rectangular Connectors - Circuit Board Installation, HKP Series
- Rectangular Connectors - Receptacle, Right Angle, Ribbon-, Lightweight, 57RE Series
- Rectangular Connectors - Insert, 690V, 35A, Threaded, High Current, CP Series
- [Ilme Insert]CDD 10 A/250 V High Density Crimp Type
- [Ilme Insert]CQ 6.5-40 A/50-400 V Crimp Type
Complementary Products
-
Rectangular Connectors - D-Sub, High-Density, Solder and Press Terminals
MISUMI Days to Ship : Same day or more
-
Rectangular Connectors - D-Sub, EMI-Shielded, Resin Hood, General Purpose
MISUMI Days to Ship : Same day or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy