(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.

All Categories

Applications

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Need Help?

Order/Quote

Order

Order

/ Order
/ Order

Part Number Checker

Catalog Request

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.

Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Plastic Plates - PEEK, Holes Optional

MISUMI

If finish-machined, these plate become more convenient.

inCAD Components

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

■Standard Type
PEEK Plates:Related Image

■Pre-Drilled Type
PEEK Plates:Related Image

・Materials

Type	[ M ]Grade	Color	Operating Ambient Temperature
PKA	Standard	Ash Brown	-50~250°C
PKAH	Sliding	Black	-50~250°C
PKCA	Electrical Conductivity	Black	Ambient Temp. ~ 250°C

[ ! ]The material is not filled with glass fiber.
[ M ] Material: PEEK

Specifications

■Standard Type

	Part Number	-	A	-	B	-	T
Circular Sawing	PKA	-	300	-	200	-	5
Guaranteed Perpendicularity of Circular Sawing	PKANTQ	-	200.5	-	100.5	-	10
4-Side Milling etc.	PKA4FN	-	150.5	-	100.3	-	15
6-Surface Milling etc.	PKA6FMM	-	100.3	-	90.5	-	10.5
Upper-Lower Surface Milling etc.	PKA2FQ	-	80	-	50	-	5

■Pre-drilled Type

Part Number	-	A	-	B	-	T	-	F	-	G	-	Screw Nominal Dia.	-	L
PKA2H PKCA2H	- -	50 150	- -	25 120	- -	8 10	- -	F34 F80	- -	G10 G60	- -	N4 M8	-	L8

■Standard Type

Part Number

Dimension Range by Material

Type

Finish Selection

T Dimension Tolerance

A, B Dimension Tolerance

PKA
PKAH
PKCA

Standard
Sliding
Conductive

Circular Sawing

1 mm Increment

Selection

—

Not Available

PKA

20–500

20–400

20–250

20–150

PKAH

20–300

20–200

PKCA

20–250

20–150

Guaranteed Perpendicularity of Circular Sawing (NT)

0.1 mm Increment

Selection

Not Available

Q
N
M

T5, 8, 10
0+0.3
±0.2
-0.3–0

T16, 20
0+0.4
±0.3
-0.4–0

T25
0+0.5
±0.4
-0.5–0

PKA

20–300

20–200

20–250

20–150

PKAH

20–300

20–200

PKCA

20–250

20–150

4-Side Milling etc. (4F)

0.1 mm Increment

Selection

Not Available

Q 0+0.2
N ±0.1
M -0.2–0

PKA

10–300

10–200

10–250

10–150

PKAH

10–300

10–200

PKCA

10–250

10–150

6-Surface Milling etc. (6F)

0.1 mm Increment

Q 0+0.2
N ±0.1
NM -0.2–0

Q 0+0.2
N ±0.1
M -0.2–0

PKA

10–300

10–200

5–9

10–250

10–150

9.1–24

PKAH

10–300

10–200

5–9

PKCA

10–300

10–200

9.1–10

10–250

10–150

10.1–19

Upper-Lower Surface Milling etc.

1 mm Increment

0.1 mm Increment

Q 0+0.2
N ±0.1
NM -0.2–0

Not Available

PKA

20–250

20–150

5–24

PKAH

5–9

PKCA

9.1–19

• Dimension Tolerance of A and B

A, B	A, B Dimension Tolerance
Unit: mm	A, B Dimension Tolerance
~99	±0.5
100~250	±0.75
251~	±1.0

• T Dimension Tolerance, Rate of Camber and Torsion

T	T Dimension Tolerance			Rates of Camber and Torsion
T	PKA	PKAH	PKCA	per 1,000mm
1	+0.1~+0.5	-	-	-
2, 3	±0.3	-	-	-
5, 8, 10	0~+1.1	0~+1.1	0~+1.1	1.2% or Less
16, 20	0~+1.7	-	0~+1.7	0.8% or Less
25	0~+1.7	-	-	0.8% or Less

Precision Guarantee

Finish	Width Parallelism	Perpendicularity of Reference Plane
	per 100mm
Guaranteed Perpendicularity of Circular Saw Cuts (NT)	0.1	0.1
4-Side Milling etc. (4F)
6-Surface Milling etc. (6F)

[ ! ]Reference plane stickers are attached to 4-side milled plates.

■Pre-drilled Type

Part Number

T Dimension Range by Material

Type

T Dimension Tolerance

No. of Holes

PKA
PKAH
PKCA

Standard
Sliding
Conductive

Circular Sawing

1 mm Increment

Selection

0.5 mm Increment

Not Available

2H
(Horizontal)
2HL
(Vertical)
4H
6H

20–300

20–200

PKA

6–291.5
(2H, 4H)
4.5–295.5
(2HL)
6–145.5
(6H)

4.5–195.5
(2H)
6–191.5
(2HL, 4H, 6H)

PKAH

PKCA

20–250

20–150

PKA

6–241.5
(2H, 4H)
4.5–245.5
(2HL)
6–120.5
(6H)

4.5–145.5
(2H)
6–141.5
(2HL, 4H, 6H)

PKCA

Upper-lower Surface Milling etc.

1 mm Increment

0.1 mm Increment

0.5 mm Increment

2FQ 0+0.2
2FN ±0.1
2FM -0.2–0

2H
(Horizontal)
2HL
(Vertical)
4H
6H

20–250

20–150

PKA

5–24

6–241.5
(2H, 4H)
4.5–245.5
(2HL)
6–120.5
(6H)

4.5–145.5
(2H)
6–141.5
(2HL, 4H, 6H)

PKAH

5–9

PKCA

9.1–19

T Dimension	Pre-drilled Hole Nominal Dia.
	Through Hole	Counterbore Hole					Threaded Insert
	N	Z					M						L
5~7	3 4 5 6 8 10	-					3	4					(Threaded Insert Length) Select from Table 1
8, 9		3	4	5			3	4	5	6	8
10~15			4	5	6		3	4	5	6	8	10
16~25			4	5	6	8	3	4	5	6	8	10

[ ! ]Dimension F Specification Range: For 2H and 4H, d(d₁)+2.5≤F≤A-d(d₁)-5; for 2HL, d(d₁)/2+2.5≤F≤A-d(d₁)/2-2.5;
for 6H, d(d₁)+2.5≤F≤(A-d(d₁)-5)/2.
[ ! ]Dimension G Specification Range: For 2H, d(d₁)/2+2.5≤G≤B-d(d₁)/2-2.5; for 2HL, 4H and 6H, d(d₁)+2.5≤G≤B-d(d₁)-5.
(d for through hole and threaded insert, d₁ for counterbore)
[ ! ]For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).

• Dimension Tolerance of A and B

A, B	A, B Dimension Tolerance
Unit: mm	A, B Dimension Tolerance
~99	±0.5
100~250	±0.75
251~	±1.0

• T Dimension Tolerance, Rate of Camber and Torsion

T	T Dimension Tolerance			Rates of Camber and Torsion
T	PKA	PKAH	PKCA	per 1,000mm
5, 8, 10	0~+1.1	0~+1.1	0~+1.1	1.2% or Less
16, 20	0~+1.7	-	0~+1.7	0.8% or Less
25	0~+1.7	-	-	0.8% or Less

Alterations

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

1
2
3
4
Next >>

Part Number
PKA2FM2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,4,5,6,8,10]
PKA2FM2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,4,5,6,8,10]
PKA2FM2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,4,5,6,8,10]
PKA2FM2HL-[20-250/1]-[20-150/1]-[5-24/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10]
PKA2FM2HL-[20-250/1]-[20-150/1]-[5-24/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10]
PKA2FM2HL-[20-250/1]-[20-150/1]-[5-24/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8]
PKA2FM4H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10]
PKA2FM4H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10]
PKA2FM4H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8,10]
PKA2FM6H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10]
PKA2FM6H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10]
PKA2FM6H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8,10]
PKA2FM-[20-250/1]-[20-150/1]-[5-24/0.1]
PKA2FN2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,4,5,6,8,10]
PKA2FN2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,4,5,6,8,10]
PKA2FN2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,4,5,6,8,10]
PKA2FN2HL-[20-250/1]-[20-150/1]-[5-24/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10]
PKA2FN2HL-[20-250/1]-[20-150/1]-[5-24/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10]
PKA2FN2HL-[20-250/1]-[20-150/1]-[5-24/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8]
PKA2FN4H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10]
PKA2FN4H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10]
PKA2FN4H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8,10]
PKA2FN6H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10]
PKA2FN6H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10]
PKA2FN6H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8,10]
PKA2FN-[20-250/1]-[20-150/1]-[5-24/0.1]
PKA2FQ2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,4,5,6,8,10]
PKA2FQ2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,4,5,6,8,10]
PKA2FQ2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,4,5,6,8,10]
PKA2FQ2HL-[20-250/1]-[20-150/1]-[5-24/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10]
PKA2FQ2HL-[20-250/1]-[20-150/1]-[5-24/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10]
PKA2FQ2HL-[20-250/1]-[20-150/1]-[5-24/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8]
PKA2FQ4H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10]
PKA2FQ4H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10]
PKA2FQ4H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8,10]
PKA2FQ6H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10]
PKA2FQ6H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10]
PKA2FQ6H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8,10]
PKA2FQ-[20-250/1]-[20-150/1]-[5-24/0.1]
PKA2H-[20-300/1]-[20-200/1]-[5,8,10,16,20,25]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-M[3,4,5,6,8,10]
PKA2H-[20-300/1]-[20-200/1]-[5,8,10,16,20,25]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-N[3,4,5,6,8,10]
PKA2H-[20-300/1]-[20-200/1]-[5,8,10,16,20,25]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-Z[3,4,5,6,8,10]
PKA2HL-[20-300/1]-[20-200/1]-[5,8,10,16,20,25]-F[4.5-291.5/0.5]-G[9-191/0.5]-M[3,4,5,6,8,10]
PKA2HL-[20-300/1]-[20-200/1]-[5,8,10,16,20,25]-F[4.5-291.5/0.5]-G[9-191/0.5]-N[3,4,5,6,8,10]
PKA2HL-[20-300/1]-[20-200/1]-[5,8,10,16,20,25]-F[4.5-291.5/0.5]-G[9-191/0.5]-Z[3,4,5,6,8]
PKA4FM-[10-300/0.1]-[10-200/0.1]-[5,8,10,16,20,25]
PKA4FN-[10-300/0.1]-[10-200/0.1]-[5,8,10,16,20,25]
PKA4FQ-[10-300/0.1]-[10-200/0.1]-[5,8,10,16,20,25]
PKA4H-[20-300/1]-[20-200/1]-[5,8,10,16,20,25]-F[6-291.5/0.5]-G[6-191.5/0.5]-M[3,4,5,6,8,10]
PKA4H-[20-300/1]-[20-200/1]-[5,8,10,16,20,25]-F[6-291.5/0.5]-G[6-191.5/0.5]-N[3,4,5,6,8,10]
PKA4H-[20-300/1]-[20-200/1]-[5,8,10,16,20,25]-F[6-291.5/0.5]-G[6-191.5/0.5]-Z[3,4,5,6,8,10]
PKA6FMM-[10-300/0.1]-[10-200/0.1]-[5-24/0.1]
PKA6FMN-[10-300/0.1]-[10-200/0.1]-[5-24/0.1]
PKA6FMQ-[10-300/0.1]-[10-200/0.1]-[5-24/0.1]
PKA6FNM-[10-300/0.1]-[10-200/0.1]-[5-24/0.1]
PKA6FNN-[10-300/0.1]-[10-200/0.1]-[5-24/0.1]
PKA6FNQ-[10-300/0.1]-[10-200/0.1]-[5-24/0.1]
PKA6FQM-[10-300/0.1]-[10-200/0.1]-[5-24/0.1]
PKA6FQN-[10-300/0.1]-[10-200/0.1]-[5-24/0.1]
PKA6FQQ-[10-300/0.1]-[10-200/0.1]-[5-24/0.1]

Minimum order quantity	Days to Ship	RoHS	Grade	Color	Hole Machining	Finishing Method	T Dimension Tolerance	AB Dimension Tolerance	A (mm)	B (mm)	Counterbored Hole Nominal Dia. [Z]	F (mm)	G (mm)	T (mm)	Threaded Insert Nominal Dia. [M]	Through Hole Nominal Dia. [N]
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2H	Upper-lower Surface Milled	N(±0.1)	-	20 ～ 250	20 ～ 150	-	6 ～ 241.5	4.5 ～ 145.5	5 ～ 24	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2H	Upper-lower Surface Milled	N(±0.1)	-	20 ～ 250	20 ～ 150	-	6 ～ 241.5	4.5 ～ 145.5	5 ～ 24	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2H	Upper-lower Surface Milled	N(±0.1)	-	20 ～ 250	20 ～ 150	3 ～ 10	6 ～ 241.5	4.5 ～ 145.5	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2HL	Upper-lower Surface Milled	M(0/-0.2)	-	20 ～ 250	20 ～ 150	-	4.5 ～ 245.5	6 ～ 141.5	5 ～ 24	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2HL	Upper-lower Surface Milled	M(0/-0.2)	-	20 ～ 250	20 ～ 150	-	4.5 ～ 245.5	6 ～ 141.5	5 ～ 24	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2HL	Upper-lower Surface Milled	M(0/-0.2)	-	20 ～ 250	20 ～ 150	3 ～ 8	4.5 ～ 245.5	6 ～ 141.5	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	4H	Upper-lower Surface Milled	M(0/-0.2)	-	20 ～ 250	20 ～ 150	-	6 ～ 241.5	6 ～ 141.5	5 ～ 24	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	4H	Upper-lower Surface Milled	M(0/-0.2)	-	20 ～ 250	20 ～ 150	-	6 ～ 241.5	6 ～ 141.5	5 ～ 24	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	4H	Upper-lower Surface Milled	M(0/-0.2)	-	20 ～ 250	20 ～ 150	3 ～ 10	6 ～ 241.5	6 ～ 141.5	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	6H	Upper-lower Surface Milled	M(0/-0.2)	-	20 ～ 250	20 ～ 150	-	6 ～ 120.5	6 ～ 141.5	5 ～ 24	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	6H	Upper-lower Surface Milled	M(0/-0.2)	-	20 ～ 250	20 ～ 150	-	6 ～ 120.5	6 ～ 141.5	5 ～ 24	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	6H	Upper-lower Surface Milled	M(0/-0.2)	-	20 ～ 250	20 ～ 150	3 ～ 10	6 ～ 120.5	6 ～ 141.5	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	No Drilling Alteration	Upper-lower Surface Milled	M(0/-0.2)	-	20 ～ 250	20 ～ 150	-	-	-	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2H	Upper-lower Surface Milled	M(0/-0.2)	-	20 ～ 250	20 ～ 150	-	6 ～ 241.5	4.5 ～ 145.5	5 ～ 24	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2H	Upper-lower Surface Milled	M(0/-0.2)	-	20 ～ 250	20 ～ 150	-	6 ～ 241.5	4.5 ～ 145.5	5 ～ 24	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2H	Upper-lower Surface Milled	M(0/-0.2)	-	20 ～ 250	20 ～ 150	3 ～ 10	6 ～ 241.5	4.5 ～ 145.5	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2HL	Upper-lower Surface Milled	N(±0.1)	-	20 ～ 250	20 ～ 150	-	4.5 ～ 245.5	6 ～ 141.5	5 ～ 24	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2HL	Upper-lower Surface Milled	N(±0.1)	-	20 ～ 250	20 ～ 150	-	4.5 ～ 245.5	6 ～ 141.5	5 ～ 24	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2HL	Upper-lower Surface Milled	N(±0.1)	-	20 ～ 250	20 ～ 150	3 ～ 8	4.5 ～ 245.5	6 ～ 141.5	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	4H	Upper-lower Surface Milled	N(±0.1)	-	20 ～ 250	20 ～ 150	-	6 ～ 241.5	6 ～ 141.5	5 ～ 24	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	4H	Upper-lower Surface Milled	N(±0.1)	-	20 ～ 250	20 ～ 150	-	6 ～ 241.5	6 ～ 141.5	5 ～ 24	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	4H	Upper-lower Surface Milled	N(±0.1)	-	20 ～ 250	20 ～ 150	3 ～ 10	6 ～ 241.5	6 ～ 141.5	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	6H	Upper-lower Surface Milled	N(±0.1)	-	20 ～ 250	20 ～ 150	-	6 ～ 120.5	6 ～ 141.5	5 ～ 24	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	6H	Upper-lower Surface Milled	N(±0.1)	-	20 ～ 250	20 ～ 150	-	6 ～ 120.5	6 ～ 141.5	5 ～ 24	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	6H	Upper-lower Surface Milled	N(±0.1)	-	20 ～ 250	20 ～ 150	3 ～ 10	6 ～ 120.5	6 ～ 141.5	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	No Drilling Alteration	Upper-lower Surface Milled	N(±0.1)	-	20 ～ 250	20 ～ 150	-	-	-	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2H	Upper-lower Surface Milled	Q(+0.2/0)	-	20 ～ 250	20 ～ 150	-	6 ～ 241.5	4.5 ～ 145.5	5 ～ 24	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2H	Upper-lower Surface Milled	Q(+0.2/0)	-	20 ～ 250	20 ～ 150	-	6 ～ 241.5	4.5 ～ 145.5	5 ～ 24	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2H	Upper-lower Surface Milled	Q(+0.2/0)	-	20 ～ 250	20 ～ 150	3 ～ 10	6 ～ 241.5	4.5 ～ 145.5	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2HL	Upper-lower Surface Milled	Q(+0.2/0)	-	20 ～ 250	20 ～ 150	-	4.5 ～ 245.5	6 ～ 141.5	5 ～ 24	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2HL	Upper-lower Surface Milled	Q(+0.2/0)	-	20 ～ 250	20 ～ 150	-	4.5 ～ 245.5	6 ～ 141.5	5 ～ 24	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2HL	Upper-lower Surface Milled	Q(+0.2/0)	-	20 ～ 250	20 ～ 150	3 ～ 8	4.5 ～ 245.5	6 ～ 141.5	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	4H	Upper-lower Surface Milled	Q(+0.2/0)	-	20 ～ 250	20 ～ 150	-	6 ～ 241.5	6 ～ 141.5	5 ～ 24	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	4H	Upper-lower Surface Milled	Q(+0.2/0)	-	20 ～ 250	20 ～ 150	-	6 ～ 241.5	6 ～ 141.5	5 ～ 24	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	4H	Upper-lower Surface Milled	Q(+0.2/0)	-	20 ～ 250	20 ～ 150	3 ～ 10	6 ～ 241.5	6 ～ 141.5	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	6H	Upper-lower Surface Milled	Q(+0.2/0)	-	20 ～ 250	20 ～ 150	-	6 ～ 120.5	6 ～ 141.5	5 ～ 24	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	6H	Upper-lower Surface Milled	Q(+0.2/0)	-	20 ～ 250	20 ～ 150	-	6 ～ 120.5	6 ～ 141.5	5 ～ 24	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	6H	Upper-lower Surface Milled	Q(+0.2/0)	-	20 ～ 250	20 ～ 150	3 ～ 10	6 ～ 120.5	6 ～ 141.5	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	No Drilling Alteration	Upper-lower Surface Milled	Q(+0.2/0)	-	20 ～ 250	20 ～ 150	-	-	-	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2H	Circular Sawing	-	-	20 ～ 300	20 ～ 200	-	6 ～ 291.5	4.5 ～ 195.5	5 ～ 25	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2H	Circular Sawing	-	-	20 ～ 300	20 ～ 200	-	6 ～ 291.5	4.5 ～ 195.5	5 ～ 25	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2H	Circular Sawing	-	-	20 ～ 300	20 ～ 200	3 ～ 10	6 ～ 291.5	4.5 ～ 195.5	5 ～ 25	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2HL	Circular Sawing	-	-	20 ～ 300	20 ～ 200	-	4.5 ～ 291.5	9 ～ 191	5 ～ 25	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2HL	Circular Sawing	-	-	20 ～ 300	20 ～ 200	-	4.5 ～ 291.5	9 ～ 191	5 ～ 25	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	2HL	Circular Sawing	-	-	20 ～ 300	20 ～ 200	3 ～ 8	4.5 ～ 291.5	9 ～ 191	5 ～ 25	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	No Drilling Alteration	4-Side Milled	Q(+0.2/0)	M(0/-0.2)	10 ～ 300	10 ～ 200	-	-	-	5 ～ 25	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	No Drilling Alteration	4-Side Milled	-	N(±0.1)	10 ～ 300	10 ～ 200	-	-	-	5 ～ 25	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	No Drilling Alteration	4-Side Milled	-	Q(+0.2/0)	10 ～ 300	10 ～ 200	-	-	-	5 ～ 25	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	4H	Circular Sawing	-	-	20 ～ 300	20 ～ 200	-	6 ～ 291.5	6 ～ 191.5	5 ～ 25	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	4H	Circular Sawing	-	-	20 ～ 300	20 ～ 200	-	6 ～ 291.5	6 ～ 191.5	5 ～ 25	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	4H	Circular Sawing	-	-	20 ～ 300	20 ～ 200	3 ～ 10	6 ～ 291.5	6 ～ 191.5	5 ～ 25	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	No Drilling Alteration	6-surface Milled	M(0/-0.2)	M(0/-0.2)	10 ～ 300	10 ～ 200	-	-	-	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	No Drilling Alteration	6-surface Milled	M(0/-0.2)	N(±0.1)	10 ～ 300	10 ～ 200	-	-	-	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	No Drilling Alteration	6-surface Milled	M(0/-0.2)	Q(+0.2/0)	10 ～ 300	10 ～ 200	-	-	-	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	No Drilling Alteration	6-surface Milled	N(±0.1)	M(0/-0.2)	10 ～ 300	10 ～ 200	-	-	-	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	No Drilling Alteration	6-surface Milled	N(±0.1)	N(±0.1)	10 ～ 300	10 ～ 200	-	-	-	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	No Drilling Alteration	6-surface Milled	N(±0.1)	Q(+0.2/0)	10 ～ 300	10 ～ 200	-	-	-	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	No Drilling Alteration	6-surface Milled	Q(+0.2/0)	M(0/-0.2)	10 ～ 300	10 ～ 200	-	-	-	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	No Drilling Alteration	6-surface Milled	Q(+0.2/0)	N(±0.1)	10 ～ 300	10 ～ 200	-	-	-	5 ～ 24	-	-
1 Piece(s)	10 Days or more	10	Standard	Gray Brown	No Drilling Alteration	6-surface Milled	Q(+0.2/0)	Q(+0.2/0)	10 ～ 300	10 ～ 200	-	-	-	5 ～ 24	-	-

1
2
3
4
Next >>

More Information

[ ! ]Properties >>P.953

Product TOP

Basic Information

Material	PEEK	Material	PEEK

Configure

208 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Grade
Standard

Conductive

Sliding
Clear
Color
- Black
- Gray Brown
Clear
Hole Machining
No Drilling Alteration

2H

2HL

4H

6H
Clear
Finishing Method
- 4-Side Milled
- 6-surface Milled
- Circular Sawing
- Guaranteed Perpendicularity of Circular Sawing
- Upper-lower Surface Milled
Clear
T Dimension Tolerance
- M(0/-0.2)
- N(±0.1)
- Q(+0.2/0)
Clear
AB Dimension Tolerance
- M(0/-0.2)
- N(±0.1)
- Q(+0.2/0)
Clear
A(mm)
[10-300/0.1mm Unit(s)][20-300/0.5mm Unit(s)][20-300/1mm Unit(s)]
Clear
B(mm)
[10-200/0.1mm Unit(s)][20-200/0.5mm Unit(s)][20-200/1mm Unit(s)]
Clear
Counterbored Hole Nominal Dia. [Z]
3

4

5

6

8

10
Clear
F(mm)
[4.5-291.5/0.5mm Unit(s)]
Clear
G(mm)
[4.5-195.5/0.5mm Unit(s)]
Clear
T(mm)
1

2

3

5

8

10

16

20

25
[5-24/0.1mm Unit(s)]
Clear
Threaded Insert Nominal Dia. [M]
3

4

5

6

8

10
Clear
Through Hole Nominal Dia. [N]
3

4

5

6

8

10
Clear
type
- PKA
- PKA#H
- PKA2F#
- PKA2F##H
- PKA4F#
- PKA6F##
- PKAH
- PKAH#H
- PKAH2F#
- PKAH2F##H
- PKAH4F#
- PKAH6F##
- PKAHNT#
- PKANT#
- PKCA
- PKCA#H
- PKCA2F#
- PKCA2F##H
- PKCA4F#
- PKCA6F##
- PKCANT#
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Days or Less

10 Days or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Hex Socket Cap Screw - M4 - M10, Coarse, Configurable Length, Partially Threaded
MISUMI Days to Ship : 9 Days or more
Washers - Sponge
MISUMI Days to Ship : 8 Days or more
Bumpers - Urethane & Rubber, Threaded, Standard & Configurable
MISUMI Days to Ship : 8 Days or more

Tech Support

Technical Support: Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com; Mon. - Fri. 8 a.m. - 6 p.m.; Technical Inquiry

Top of the page

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information: Contact Us

Inquiry Format

All Categories

Categories

Applications

Brands

How can we improve?

Plastic Plates - PEEK, Holes Optional

Specifications

Alterations

Part Number

More Information

Basic Information

Configure

Specification/Dimensions

Grade

Color

Hole Machining

Finishing Method

T Dimension Tolerance

AB Dimension Tolerance

A(mm)

B(mm)

Counterbored Hole Nominal Dia. [Z]

F(mm)

G(mm)

T(mm)

Threaded Insert Nominal Dia. [M]

Through Hole Nominal Dia. [N]

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Tech Support

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)