(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
This is of the Sphere-shaped head with no edge.
Part Number
Configured Part Number is shown.
Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type | |
Round | Diamond | ||||
① | O1 Tool Steel Equivalent | - | Treated Hardness: 60 ~ 63HRC | JPDQS | JPDQD |
Part Number | - | P | - | L | - | B | - | G | - | A | - | Flat Position |
JPDQD8 | - | P5.05 | - | L15 | - | B10.1 | - | G4 | - | A8.0 | - | Y |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | G 1mm Increment | A 0.1mm Increment | Flat Position | h | C | Applicable Set Screw | (W) | ||||
Type | Shape | D | D Tolerance g6 | When D | When D≥P | |||||||||
(Set Screw Flat) JPDQ | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 5.00~10.00 | 12~20 |
5.0~20.0 | 3~9 | 2.0~8.0 | X Y Applicable to Diamond Shape Type only. | 1 | 1 | M4 | 3 | 1.5 |
8 | -0.005 -0.014 | 5.00~13.00 | 14~22 | 2.0~12.0 | 1.2 | 1.5 | M5 | 3.5 | 1.8 | |||||
10 | -0.005 -0.014 | 5.00~15.00 | 15~25 | 2.0~16.0 | 1.2 | 2 | M6 | 4 | 2.2 | |||||
12 | -0.006 -0.017 | 5.00~16.00 | 15~25 | 2.0~20.0 | 1.2 | 2 | M6 | 5 | 2.5 | |||||
16 | -0.006 -0.017 | 10.00~25.00 | 24~35 | 5.0~30.0(20.0) | 2.0~28.0 | 2 | 3 | M8 | 7 | 4 | ||||
20 | -0.007 -0.020 | 13.00~30.00 | 27~40 | 2.0~36.0 | 2 | 3 | M8 | 9 | 5 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
JPDQD6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1]-G[3-9/1]-A[2-8/0.1]-[X,Y] |
JPDQD8-P[5-13/0.01]-L[14-22/1]-B[5-20/0.1]-G[3-9/1]-A[2-12/0.1]-[X,Y] |
JPDQD10-P[5-15/0.01]-L[15-25/1]-B[5-15/0.1]-G[3-9/1]-A[2-16/0.1]-[X,Y] |
JPDQD12-P[5-16/0.01]-L[15-25/1]-B[5-20/0.1]-G[3-9/1]-A[2-20/0.1]-[X,Y] |
JPDQD16-P[10-25/0.01]-L[24-35/1]-B[5-20/0.1]-G[3-9/1]-A[2-28/0.1]-[X,Y] |
JPDQD20-P[13-30/0.01]-L[27-40/1]-B[5-20/0.1]-G[3-9/1]-A[2-36/0.1]-[X,Y] |
JPDQS6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1]-G[3-9/1]-A[2-8/0.1] |
JPDQS8-P[5-13/0.01]-L[14-22/1]-B[5-30/0.1]-G[3-9/1]-A[2-12/0.1] |
JPDQS10-P[5-15/0.01]-L[15-25/1]-B[5-30/0.1]-G[3-9/1]-A[2-16/0.1] |
JPDQS12-P[5-16/0.01]-L[15-25/1]-B[5-30/0.1]-G[3-9/1]-A[2-20/0.1] |
JPDQS16-P[10-25/0.01]-L[24-35/1]-B[5-30/0.1]-G[3-9/1]-A[2-28/0.1] |
JPDQS20-P[13-30/0.01]-L[27-40/1]-B[5-30/0.1]-G[3-9/1]-A[2-36/0.1] |
Loading...
Basic Shape | Large Head / Small Head | Head Tip Shape | Spherical Surface | Drive | No |
---|---|---|---|---|---|
Shank Style | Set Screw Flat | Material | O1 Tool Steel | Heat Treatment | Hardened |
Surface Finish | No | Tolerance of Positioning Side Outer Diameter | 0/-0.01 | Shank Dia. Tolerance | g6 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy