(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Part Number
Configured Part Number is shown.
Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type | |
Round | Diamond | ||||
① | O1 Tool Steel Equivalent | - | Treated Hardness: 60 ~ 63HRC | KFA | KFD |
② | O1 Tool Steel Equivalent | Hard Chrome Plating | Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GKFA | GKFD |
③ | O1 Tool Steel Equivalent | - | - | BKFA | BKFD |
④ | 304 Stainless Steel | - | - | SKFA | SKFD |
⑤ | 304 Stainless Steel | Hard Chrome Plating | Plating Hardness: 750HV ~ | HKFA | HKFD |
⑥ | 440C or 420 Stainless Steel | - | Treated Hardness: 50 ~ 55HRC | CKFA | CKFD |
Part Number | - | P | - | L | - | B | - | E | - | A | ||||||||
Type | Shape | D Tol. | P Tolerance | D | ||||||||||||||
KF | A | M | S | 6 | - | P10.00 | - | L6 | - | B3.0 | - | E5.0 | - | A30 |
D or P | Standard Grade | Precision Grade | |||||
M | P | G | H | S | A | B | |
m6 | p6 | g6 | h7 | - | - | - | |
1.00 ~ 3.00 | +0.008 +0.002 | +0.012 +0.006 | -0.002 -0.008 | 0 -0.010 | 0 -0.01 | +0.005 0 | 0 -0.005 |
3.01 ~ 6.00 | +0.012 +0.004 | +0.020 +0.012 | -0.004 -0.012 | 0 -0.012 | |||
6.01 ~ 10.00 | +0.015 +0.006 | +0.024 +0.015 | -0.005 -0.014 | 0 -0.015 | |||
10.01 ~ 18.00 | +0.018 +0.007 | +0.029 +0.018 | -0.006 -0.017 | 0 -0.018 | |||
18.01 ~ 30.00 | +0.021 +0.008 | +0.035 +0.022 | -0.007 -0.020 | 0 -0.021 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | E 0.1mm Increment | A | C | (W) | ||||
Type | Shape | D Tolerance | P Tolerance | D | |||||||
KF GKF * BKF SKF HKF * CKF | A (Round) D (Diamond) | M P G H *A *B | S M P G H *A *B | 1 | 1.00~3.00 (1.50~2.50) | 2, 3 | 1.5~5.0 | 0.5~10.0 | 15 30 45 60 | 0.1 | 0.6 |
2 | 2.00~6.00 | 2~6 | 1.5~.15.0(10.0) | 0.5 | 1.2 | ||||||
3 | 3.00~8.00 | 3~10 | 1.5~15.0(10.0) | 0.5 | 1.5 | ||||||
4 | 4.00~8.00 | 3(4)~14 | 1.5~15.0(10.0) | 1 | 1.8 | ||||||
5 | 5.00~10.00 | 5~15 | 1.5~15.0(10.0) | 1 | 2.2 | ||||||
6 | 6.00~10.00 | 5~15 | 1.5~30.0(15.0) | 1 | 3 | ||||||
8 | 8.00~15.00 | 5(6)~16 | 1.5~30.0(15.0) | 1.5 | 3.5 | ||||||
10 | 10.00~17.00 | 5(10)~20 | 3.0~30.0(25.0) | 2 | 4 | ||||||
12 | 12.00~18.00 | 6(10)~24 | 3.0~30.0(25.0) | 2 | 5 | ||||||
13 | 13.00~20.00 | 7(12)~26 | 5.0~30.0(25.0) | 2 | 5.5 | ||||||
16 | 16.00~27.00 | 8(15)~32 | 5.0~30.0 | 3 | 7 | ||||||
20 | 20.00~30.00 | 10(15)~40 | 5.0~30.0 | 3 | 9 |
D | Available Sizes Round Shape | Available Sizes Diamond Shape | ||||||||||
①O1 Tool Steel Hardened KFA | ②Hard O1 Tool Steel GKFA | ③O1 Tool Steel BKFA | ④304 Stainless Steel SKFA | ⑤Hard 304 Stainless Steel HKFA | ⑥440C or 420 Stainless Steel CKFA | ①O1 Tool Steel Hardened KFD | ②Hard O1 Tool Steel GKFD | ③O1 Tool Steel BKFD | ④304 Stainless Steel SKFD | ⑤Hard 304 Stainless Steel HKFD | ⑥440C or 420 Stainless Steel CKFD | |
1 | ||||||||||||
2 | ||||||||||||
3 | ||||||||||||
4 | ||||||||||||
5 | ||||||||||||
6 | ||||||||||||
8 | ||||||||||||
10 | ||||||||||||
12 | ||||||||||||
13 | ||||||||||||
16 | ||||||||||||
20 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
KFAHM8-P[8-15/0.01]-L[5-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHM10-P[10-17/0.01]-L[5-20/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHM12-P[12-18/0.01]-L[6-24/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHM13-P[13-20/0.01]-L[7-26/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHM16-P[16-27/0.01]-L[8-32/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHM20-P[20-30/0.01]-L[10-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHP1-P[1-3/0.01]-L[2-3/1]-B[1.5-5/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHP2-P[2-6/0.01]-L[2-6/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHP3-P[3-8/0.01]-L[3-10/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHP4-P[4-8/0.01]-L[3-14/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHP5-P[5-10/0.01]-L[5-15/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHP6-P[6-10/0.01]-L[5-15/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHP8-P[8-15/0.01]-L[5-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHP10-P[10-17/0.01]-L[5-20/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHP12-P[12-18/0.01]-L[6-24/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHP13-P[13-20/0.01]-L[7-26/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHP16-P[16-27/0.01]-L[8-32/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHP20-P[20-30/0.01]-L[10-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHS1-P[1-3/0.01]-L[2-3/1]-B[1.5-5/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHS2-P[2-6/0.01]-L[2-6/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHS3-P[3-8/0.01]-L[3-10/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHS4-P[4-8/0.01]-L[3-14/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHS5-P[5-10/0.01]-L[5-15/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHS6-P[6-10/0.01]-L[5-15/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHS8-P[8-15/0.01]-L[5-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHS10-P[10-17/0.01]-L[5-20/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHS12-P[12-18/0.01]-L[6-24/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHS13-P[13-20/0.01]-L[7-26/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHS16-P[16-27/0.01]-L[8-32/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFAHS20-P[20-30/0.01]-L[10-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHA1-P[1.5-2.5/0.01]-L[2-3/1]-B[1.5-5/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHA2-P[2-4/0.01]-L[2-6/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHA3-P[3-8/0.01]-L[3-10/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHA4-P[4-8/0.01]-L[4-14/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHA5-P[5-10/0.01]-L[5-15/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHA6-P[6-10/0.01]-L[5-15/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHA8-P[8-15/0.01]-L[6-16/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHA10-P[10-17/0.01]-L[10-20/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHA12-P[12-18/0.01]-L[10-24/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHA13-P[13-20/0.01]-L[12-26/1]-B[5-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHA16-P[16-27/0.01]-L[15-32/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHA20-P[20-30/0.01]-L[15-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHB1-P[1.5-2.5/0.01]-L[2-3/1]-B[1.5-5/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHB2-P[2-4/0.01]-L[2-6/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHB3-P[3-8/0.01]-L[3-10/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHB4-P[4-8/0.01]-L[4-14/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHB5-P[5-10/0.01]-L[5-15/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHB6-P[6-10/0.01]-L[5-15/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHB8-P[8-15/0.01]-L[6-16/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHB10-P[10-17/0.01]-L[10-20/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHB12-P[12-18/0.01]-L[10-24/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHB13-P[13-20/0.01]-L[12-26/1]-B[5-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHB16-P[16-27/0.01]-L[15-32/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHB20-P[20-30/0.01]-L[15-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHG1-P[1.5-2.5/0.01]-L[2-3/1]-B[1.5-5/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHG2-P[2-4/0.01]-L[2-6/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHG3-P[3-8/0.01]-L[3-10/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHG4-P[4-8/0.01]-L[4-14/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHG5-P[5-10/0.01]-L[5-15/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHG6-P[6-10/0.01]-L[5-15/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHG8-P[8-15/0.01]-L[6-16/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHG10-P[10-17/0.01]-L[10-20/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHG12-P[12-18/0.01]-L[10-24/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHG13-P[13-20/0.01]-L[12-26/1]-B[5-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHG16-P[16-27/0.01]-L[15-32/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHG20-P[20-30/0.01]-L[15-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHH1-P[1.5-2.5/0.01]-L[2-3/1]-B[1.5-5/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHH2-P[2-4/0.01]-L[2-6/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHH3-P[3-8/0.01]-L[3-10/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHH4-P[4-8/0.01]-L[4-14/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHH5-P[5-10/0.01]-L[5-15/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHH6-P[6-10/0.01]-L[5-15/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHH8-P[8-15/0.01]-L[6-16/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHH10-P[10-17/0.01]-L[10-20/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHH12-P[12-18/0.01]-L[10-24/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHH13-P[13-20/0.01]-L[12-26/1]-B[5-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHH16-P[16-27/0.01]-L[15-32/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHH20-P[20-30/0.01]-L[15-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHM1-P[1.5-2.5/0.01]-L[2-3/1]-B[1.5-5/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHM2-P[2-4/0.01]-L[2-6/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHM3-P[3-8/0.01]-L[3-10/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHM4-P[4-8/0.01]-L[4-14/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHM5-P[5-10/0.01]-L[5-15/1]-B[1.5-10/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHM6-P[6-10/0.01]-L[5-15/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHM8-P[8-15/0.01]-L[6-16/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHM10-P[10-17/0.01]-L[10-20/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHM12-P[12-18/0.01]-L[10-24/1]-B[3-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHM13-P[13-20/0.01]-L[12-26/1]-B[5-25/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHM16-P[16-27/0.01]-L[15-32/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
KFDHM20-P[20-30/0.01]-L[15-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,30,45,60] |
Loading...
Product Name | Feature | Catalog |
---|---|---|
Small Diameter Locating Pins | Locating Pins with Ø4 or less diameter suitable for small works. | Click here |
Locating Pins for Height Adjusting | Locating Pins with short head for thin PC boards. | Click here |
Nonmagnetic Locating Pins | Nonmagnetic Aluminum locating pins suitable for environments where magnetism must be avoided. | Click here |
Plastic Locating Pins | Plastic Locating Pins prevent work damages. | Click here |
Height Adjusting Pins | Locating Pins suitable for locating in vertical direction. | Click here |
Support Pins | Pins for use in higher position to avoid interferences. | Click here |
Basic Shape | Large Head | Head Tip Shape | Tapered | Drive | No |
---|---|---|---|---|---|
Shank Style | Straight(Press Fit) |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy