(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Miniature Linear Guides - With standard block, long. (Part Numbers)
- Spec Expansion
Miniature stainless steel linear guides with longer length standard block, designed to withstand higher loads and moments. Configurable preload and precision. Selectable lubricant type, even with MX constant lubrication accessory. Blocks and rails cannot be purchased separately.
- inCAD Components
(i)Caution
- The appearance of this product has changed as of September 2017.
About Misumi Linear Guide Exterior Change - Delivery times for some of our products may be delayed as national government authorities have imposed limit of capacity at our production sites.
Part Number
Configured Part Number is shown.
・Materials
| [ M ] Material [ H ] Hardness | Type | MX (Lubrication Unit) | L Dimension | Number of Blocks | |||
| Light Preload | Slight Clearance | ||||||
| High Grade | Precision Grade | Standard Grade | |||||
| Industry Standard Materials | Stainless Steel 56HRC~ | SSELB | SSELBV | SSELBZ | Blank: None -MX: Provided | Selectable | 1 |
| SSEL2B | SSEL2BV | SSEL2BZ | 2 | ||||
| SSELBL | SSELBLV | SSELBLZ | Configurable | 1 | |||
| SSEL2BL | SSEL2BLV | SSEL2BLZ | 2 | ||||
| Carbon Steel 58HRC~ | SELB | SELBV | SELBZ | - | Selectable | 1 | |
| SEL2B | SEL2BV | SEL2BZ | 2 | ||||
| SELBL | SELBLV | SELBLZ | Configurable | 1 | |||
| SEL2BL | SEL2BLV | SEL2BLZ | 2 | ||||
[ ! ]H6 is for stainless steel (High Grade) only.
Specifications
| Part Number | L | Block Dimension | Guide Rail Dimension | |||||||||||||||||
| Type | MX | H | W | L1 | B | C | Sxℓ | L2 | K | Cb | W1 | W2 | H1 | Ca | Counterbored Hole | F | G | |||
| d1xd2xh | ||||||||||||||||||||
| SSELB SSEL2B SSELBL SSEL2BL | SSELBV SSEL2BV SSELBLV SSEL2BLV | SSELBZ SSEL2BZ SSELBLZ SSEL2BLZ | - | 6 | 40~100 (70) | 12 | 21 | 8 | - | M2x1.5 | 13.3 | 4.5 | 0.3 | 5 | 3.5 | 4 | 0.3 | 2.4x3.5x1 | 15 | 5 |
| 8 | 40~130 (85) | 17 | 32 | 12 | 13 | M2x2.5 | 22 | 6.5 | 0.3 | 7 | 5 | 4.7 | 0.3 | 2.4x4.2x2.3 | 15 | 5 | ||||
| Blank: None -MX: Provided | 10 | 55~275 (95) | 20 | 40 | 15 | 16 | M3x3 | 29 | 7.8 | 0.3 | 9 | 5.5 | 5.5 | 0.3 | 3.5x6x3.5 | 20 | 7.5 | |||
| 13 | 70~470 (120) | 27 | 45.8 | 20 | 20 | M3x3.5 | 31.8 | 10 | 0.5 | 12 | 7.5 | 7.5 | 0.5 | 3.5x6x4.5 | 25 | 10 | ||||
| 16 | 110~670 (150) | 32 | 58.3 | 25 | 25 | M3x4 | 43.3 | 12 | 0.5 | 15 | 8.5 | 9.5 | 0.5 | 3.5x6x4.5 | 40 | 15 | ||||
| 20 | 160~700 (220) | 40 | 67.7 | 30 | 30 | M4x6 | 52.3 | 15 | 0.5 | 20 | 10 | 11 | 0.5 | 6x9.5x5.5 | 60 | 20 | ||||
Materials
| [ M ] Material [ H ] Hardness | Type | MX (Lubrication Unit) | L Dimension | Number of Blocks | ||
| Light Preload | Slight Clearance | |||||
| High Grade | Precision Grade | Standard Grade | ||||
| Stainless Steel 56HRC min. | SSELB | SSELBV | SSELBZ | Blank: None -MX: Provided | Selectable | 1 |
| SSEL2B | SSEL2BV | SSEL2BZ | 2 | |||
| SSELBL | SSELBLV | SSELBLZ | Configurable | 1 | ||
| SSEL2BL | SSEL2BLV | SSEL2BLZ | 2 | |||
[ ! ]H6 is for High Grade only.
| Part Number | - | L | |
SSELB10 RSELB10 SSELB10L SSELB10G | - - - - | 275 75 75 75 | (Low Temperature Black Chrome Plating) (L Type Greased) (G Type Greased) |
[ ! ]Blocks are equipped with retainers (wire) to prevent balls from falling out.
For proper block handling, Click here.
[ ! ]Radial clearances and accuracies are not guaranteed if the blocks and rails are interchanged from the original set combinations.
[ ! ]Straight grooves are provided on datum planes.
Be sure to match the datum lines when using.
[ ! ]Rails cannot be connected end to end.
[ ! ]The accuracy of Linear Guides is guaranteed after mounting the rail (after fastening screws on the rail and pushing it onto the datum plane).Minor bending of the rail will be adjusted after being mounted and will not affect the performance.
■Accessories
· H6 comes with Number 0, Class 1 Phillips button head screws (M2x6).
· H8 comes with cap screws (M2x6).
■Others
· Filled with Lithium soap based grease (Multemp Grease PS2 by Kyodo Yushi Co., Ltd. ).
· For operating life calculations please Click here, or by using our free software at, http://www.misumiusa.com/lg-bs_software/
· The MX type is greased with a lithium complex grease (TOUGHLIX GREASE MP2, made by JXTG Nippon Oil & Energy Corporation).
Price list
| H | L | Unit Price | |||||||
| Stainless Steel | Carbon Steel | ||||||||
| SSELB | SSEL2B | SSELBZ | SSEL2BZ | SELB | SEL2B | SELBZ | SEL2BZ | ||
| 6 | 40 | - | - | - | - | - | - | - | |
| 55 | - | - | - | - | - | - | - | ||
| 70 | - | - | - | - | - | - | |||
| 85 | - | - | - | - | - | - | |||
| 100 | - | - | - | - | - | - | |||
| 8 | 40 | - | - | - | - | ||||
| 55 | - | - | - | - | |||||
| 70 | - | - | - | - | |||||
| 85 | |||||||||
| 100 | |||||||||
| 115 | |||||||||
| 130 | |||||||||
| 10 | 55 | - | - | - | - | ||||
| 75 | - | - | - | - | |||||
| 95 | |||||||||
| 115 | |||||||||
| 135 | |||||||||
| 155 | |||||||||
| 175 | |||||||||
| 195 | |||||||||
| 215 | |||||||||
| 235 | |||||||||
| 255 | |||||||||
| 275 | |||||||||
| 13 | 70 | - | - | - | - | ||||
| 95 | - | - | - | - | |||||
| 120 | |||||||||
| 145 | |||||||||
| 170 | |||||||||
| 195 | |||||||||
| 220 | |||||||||
| 245 | |||||||||
| 270 | |||||||||
| 295 | |||||||||
| 320 | |||||||||
| 345 | |||||||||
| 370 | |||||||||
| 395 | |||||||||
| 420 | |||||||||
| 445 | |||||||||
| 470 | |||||||||
| 16 | 110 | - | - | - | - | ||||
| 150 | |||||||||
| 190 | |||||||||
| 230 | |||||||||
| 270 | |||||||||
| 310 | |||||||||
| 350 | |||||||||
| 390 | |||||||||
| 430 | |||||||||
| 470 | |||||||||
| 510 | |||||||||
| 550 | |||||||||
| 590 | |||||||||
| 630 | |||||||||
| 670 | |||||||||
| 20 | 160 | - | - | - | - | ||||
| 220 | |||||||||
| 280 | |||||||||
| 340 | |||||||||
| 400 | |||||||||
| 460 | |||||||||
| 520 | |||||||||
| 580 | |||||||||
| 640 | |||||||||
| 700 | |||||||||
| H | Unit Price | |||
| Stainless Steel | Carbon Steel | |||
| SSELBL | SSEL2BL | SELBL SELBLZ | SEL2BL SEL2BLZ | |
| SSELBLZ | SSEL2BLZ | |||
| 6 | - | - | ||
| 8 | ||||
| 10 | ||||
| 13 | ||||
| 16 | ||||
| 20 | ||||
■Additional Block Price (Same Price for High/Standard Grade)
| H | B3: Price Adder | B4: Price Adder | ||
| Stainless Steel | Carbon Steel | Stainless Steel | Carbon Steel | |
| 8 | ||||
| 10 | ||||
| 13 | ||||
| 16 | ||||
| 20 | ||||
[ ! ]Unit price for Precision Type is the above price x1.2. (Round to the nearest ten JPY.)
Alterations
More Information
| H | B3 (3-block) | B4 (4-block) |
| 6 | 85 | - |
| 8 | 115 | - |
| 10 | 155 | 195 |
| 13 | 170 | 220 |
| 16 | 230 | 270 |
| 20 | 280 | 340 |
Technical Information
Characteristics of Linear Guides
- Linear guides utilize steel balls that roll on ground raceways, and the balls are recirculated using plastic return caps.
- End seals prevent foreign materials from entering into the blocks.
- Load ratings are the same for all four directions (radial, reverse-radial, and lateral directions). Can be used in any orientation.
Preload (Radial Clearance)
| Type of guide | Preload | Height H Dimension | Radial Clearance (µm) |
|---|---|---|---|
| Miniature Linear Guide | Light Preload | 6 ~ 20 | -3 ~ 0 |
| Slight Clearance | 0 ~ 15 |
- Clearance and preload of MISUMI Linear Guides are controlled with minute ball size adjustments.
- Increased rigidity and reduced elastic deformation will result by preloading (negative clearance).
- In general, selecting some preloads would have a positive effect on the accuracy and service life of the Linear Guides.
- Blocks and rails manufactured by MIUSMI guarantee their own radial clearance (preload) and accuracy as sets of blocks and rails. Be sure to use the blocks and rails in sets.
Types of Greases
The following types of greases are used in MISUMI linear guides.
| Grease | Linear Guide | Grease Model | Features |
|---|---|---|---|
| Standard | Miniature | Multemp Grease PS2 (Manufactured by Kyodo Yushi) | Grease with excellent low temperature and low torque properties. |
| Miniature with MX lubrication unit | Tufflix MP2 (Manufactured by JX Nippon Oil & Energy) | Reduces temperature rise in the bearing area; extends bearing life and reduces grease replenishment interval and maintenance work. | |
| Medium Load Heavy Load | Albania Grease S2 (Manufactured by Showa Shell Sekiyu) | It has excellent lubrication and shows excellent performance under normal and heavy load conditions. | |
| Type L | Miniature/Medium/Heavy Load | ET-100K (Manufactured by Kyodo Yushi) | It has excellent heat resistance, oxidation stability, adhesion and tackiness. It is also a low dispersion, low leakage grease. |
| Type G | LG2 (Manufactured by NSK Ltd.) | It produces little dust and has excellent wear resistance and rust resistance properties. |
Maintenance
The grease forms an oil film on the steel balls and on the slideways of the linear guide, reducing friction.
Loss and deterioration of the grease will greatly affect the service life of the linear guide, so it must be lubricated on time depending on the conditions of use.
MISUMI linear guides are lubricated with standard grease at the time of shipment, so they can be used as is.
Recommended lubrication intervals
Lubricate every 6 months. If linear guide is used for long distances, it is recommended to lubricate every 3 months, or if it is used more than 1000 km in a period, we recommend every 1000 km.
*The above is the distance-based lubrication interval. If the grease deteriorates or is heavily contaminated due to the operating environment, it may be necessary to shorten the lubrication interval.
By using a lubrication unit, it is possible to extend the lubrication interval considerably.
MX Lubrication Units
Features
Long-term Maintenance-Free Condition
The special polyurethane in MX Lubrication Unit impregnates grease, and its micropore structure provides an optimal amount of grease on the raceway surface. A constant oil film is formed between steel balls and the raceway, enabling long-term maintenance-free operation.
Cost Benefit
Extended lubrication intervals result in reduce maintenance cost.
Short Lead Time
Ship time is the same as that of standard products.
Structure
Special polyurethane (yellow color) has interconnected micropores and has excellent water-holding capacity. This allows the unit to hold more grease.
Test Results
The linear guides with MX lubrication unit achieved 2,000 km of travel, more than the standard units without grease
Test conditions
| Sample | SXR24 |
|---|---|
| Load | 2.87 kN |
| Travel speed | 750 mm/sec |
- No grease: degreased linear guide
- No grease + MX: degreased linear guide equipped with MX only MX is filled with Alvania Grease S2 by Showa Shell Sekiyu K.K.
[!] Test results are for reference only and are not guaranteed
Permissible loads
| H | Basic Load Rating | Allowable Static Moment | Mass | ||||
|---|---|---|---|---|---|---|---|
| C (Dynamic) kN | Co (Static) kN | MA N・m | MB N・m | MC N・m | Block kg | Guide Rails kg/m | |
| 6 | 0.6 | 1.0 | 1.8 | 1.8 | 2.3 | 0.005 | 0.13 |
| 8 | 1.6 | 2.4 | 7.5 | 7.5 | 9.0 | 0.016 | 0.19 |
| 10 | 2.2 | 3.7 | 12.3 | 12.3 | 13.0 | 0.03 | 0.31 |
| 13 | 3.5 | 5.3 | 24.5 | 26.5 | 32.3 | 0.06 | 0.61 |
| 16 | 5.8 | 8.7 | 57.8 | 62.6 | 67.6 | 0.10 | 1.02 |
| 20 | 7.2 | 13.5 | 80.7 | 80.7 | 138.2 | 0.18 | 1.65 |
kgf = N ・ 0.101972
kgf = kilograms force, N = Newton
Support Information
Shelf Life Information
For more information about the calculation of useful life, click here.
Mounting Hole Information
For more information about mounting holes and G-value, click here.
Installation Information
For more information about the installation click here.
Cautions
If the linear guides are handled incorrectly, the quality may deteriorate. When using MISUMI linear guides, consider the following points:
Be careful when removing the blocks
MISUMI linear guidesare equipped with a retainer, so that the balls will not fall out even if the block is removed from the rail. However, if the block is removed from the rail at high speed or inserted at an angle, the balls may fall out. Be careful when removing and installing the blocks.
Blocks and rails not sold separately
Linear guides MISUMI are only sold as a block and rail assembly. For resin retainer type only, blocks and rails can be purchased separately.
Please do not replace with another product
The radial clearance and accuracy of MISUMI linear guides are guaranteed as a block and rail assembly, so the accuracy is not guaranteed when combined with another product.
Please check the reference surface before installation.
Linear guides have reference planes on both the rail and the block (the side with a straight groove is provided). When installing the linear guide, correctly align this reference surface with the mounting reference surface of the table and base and secure it. For more details, refer to"Installation" in "Support Information".
Please do not add rails
MISUMI linear guides are shipped with chamfered edges on the end of the rail. The use of additional rails is not covered under warranty.
Secure all rail mounting holes.
The rail curvature is corrected with all mounting holes clamped. Accuracy is guaranteed under these conditions.
Accessories
| Linear Guide Clamps | Height Adjusting Blocks | |
|---|---|---|
| Height Adjusting Blocks | Stopper Bolt | |
 |  |  |
| Rail Fastening | ||
| Linear Guide Locks | Linear Guide Lock Units | Linear Guide Adjustment Unit |
 |  |  |
Compatible Models
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| SSEL2B16-350 |
| SSEL2B16G-350 |
| SSEL2B16L-350 |
| SSEL2BL13-350 |
| SSEL2BL13G-350 |
| SSEL2BL13L-350 |
| SSEL2BL16-350 |
| SSEL2BL16G-350 |
| SSEL2BL16L-350 |
| SSEL2BL20-350 |
| SSEL2BL20G-350 |
| SSEL2BL20L-350 |
| SSEL2BLV13-350 |
| SSEL2BLV13G-350 |
| SSEL2BLV13L-350 |
| SSEL2BLV16-350 |
| SSEL2BLV16G-350 |
| SSEL2BLV16L-350 |
| SSEL2BLV20-350 |
| SSEL2BLV20G-350 |
| SSEL2BLV20L-350 |
| SSEL2BLZ13-350 |
| SSEL2BLZ13G-350 |
| SSEL2BLZ13L-350 |
| SSEL2BLZ16-350 |
| SSEL2BLZ16G-350 |
| SSEL2BLZ16L-350 |
| SSEL2BLZ20-350 |
| SSEL2BLZ20G-350 |
| SSEL2BLZ20L-350 |
| SSEL2BV16-350 |
| SSEL2BV16G-350 |
| SSEL2BV16L-350 |
| SSEL2BZ16-350 |
| SSEL2BZ16G-350 |
| SSEL2BZ16L-350 |
| SSELB16-350 |
| SSELB16G-350 |
| SSELB16L-350 |
| SSELB-MX16-350 |
| SSELBL13-350 |
| SSELBL13G-350 |
| SSELBL13L-350 |
| SSELBL16-350 |
| SSELBL16G-350 |
| SSELBL16L-350 |
| SSELBL20-350 |
| SSELBL20G-350 |
| SSELBL20L-350 |
| SSELBL-MX13-350 |
| SSELBL-MX16-350 |
| SSELBL-MX20-350 |
| SSELBLV13-350 |
| SSELBLV13G-350 |
| SSELBLV13L-350 |
| SSELBLV16-350 |
| SSELBLV16G-350 |
| SSELBLV16L-350 |
| SSELBLV20-350 |
| SSELBLV20G-350 |
| SSELBLV20L-350 |
| SSELBLV-MX13-350 |
| SSELBLV-MX16-350 |
| SSELBLV-MX20-350 |
| SSELBLZ13-350 |
| SSELBLZ13G-350 |
| SSELBLZ13L-350 |
| SSELBLZ16-350 |
| SSELBLZ16G-350 |
| SSELBLZ16L-350 |
| SSELBLZ20-350 |
| SSELBLZ20G-350 |
| SSELBLZ20L-350 |
| SSELBLZ-MX13-350 |
| SSELBLZ-MX16-350 |
| SSELBLZ-MX20-350 |
| SSELBV16-350 |
| SSELBV16G-350 |
| SSELBV16L-350 |
| SSELBV-MX16-350 |
| SSELBZ16-350 |
| SSELBZ16G-350 |
| SSELBZ16L-350 |
| SSELBZ-MX16-350 |
Loading...
Basic Information
| Set / Single Item | Set | Block Type | Long Block | Rail Type | Standard |
|---|---|---|---|---|---|
| Material | Stainless Steel | Ball Arrangement | Miniature Type | Retainer | N/A |
| Rolling Element | Ball |
Specification/Dimensions
-
Rail Width W1(mm)
-
Unit Height H(mm)
-
No. of Blocks
- 1
- 2
-
Preload
- Light Preload
- Clearance
- Light Preload
-
Accuracy
- Standard Grade
- High Grade
- Precision Grade
-
Nominal Part Number
-
Lubrication Type
- Lithium Base Grease (Standard)
- Self-Lubricated
- Special Grease (Clean Room) - G Type
- Special Grease (Heat Resistant) - L Type
-
L Dimension Type
- Configurable Type
- Standard Type
-
type
- SSEL2B
- SSEL2BL
- SSEL2BLV
- SSEL2BLZ
- SSEL2BV
- SSEL2BZ
- SSELB
- SSELB-MX
- SSELBL
- SSELBL-MX
- SSELBLV
- SSELBLV-MX
- SSELBLZ
- SSELBLZ-MX
- SSELBV
- SSELBV-MX
- SSELBZ
- SSELBZ-MX
-
Rail Length L(mm)
- 40
- 55
- 70
- 75
- 85
- 95
- 100
- 110
- 115
- 120
- 130
- 135
- 145
- 150
- 155
- 160
- 170
- 175
- 190
- 195
- 215
- 220
- 230
- 235
- 245
- 255
- 270
- 275
- 280
- 295
- 310
- 320
- 340
- 345
- 350
- 370
- 390
- 395
- 400
- 420
- 430
- 445
- 460
- 470
- 510
- 520
- 550
- 580
- 590
- 630
- 640
- 670
- 700
[41-699/1mm Unit(s)]
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 12 Days or Less
Specify Alterations
When WC is selected, be sure order quantity is a multiple of 2
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked questions (FAQ)
- 質問: Are the block's ball bearings retained?
- 回答: Yes, all ball bearings are retained on Misumi linear guides.
- 質問: What is the seal material of you miniature linear guides?
- 回答: Nitrile Rubber (NBR).
Additional Products in this Category
- Ultra Heavy Load Linear Guides - Standard block, stainless steel. Interchangeable.
- Linear Guides - For heavy load.
- Linear Guides - For heavy load, with dust protection seals or metal scrapers.
- Miniature LM Guides - SRS Model Assembly.
- LM Guides - Miniature, model SRS-G assembly.
- LM Guides - Block Only, Model HSR.
- LM Guides - Block only, model HRW.
- Linear Guides - Rail only, 400 series, Thomson brand.
Complementary Products
-
Miniature Linear Guides - Standard block, available with constant lubrication unit.
MISUMI Days to Ship : 12 Days or more
-
Linear Guides - Low temp black chrome plated, standard/wide Block.
MISUMI Days to Ship : 12 Days or more
MISUMI Unit Example related to this product
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy