(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Cam Followers - Hexagon socket for head and shank, flat.
Click this image to zoom it.
Move the mouse over the image to zoom
- New Products
- Volume Discount
Hex socket and grease fittings are mounted on both the head and thread part. They can be secured from either head or thread side. Greasing is enabled from both directions.
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
| Type | [ M ]Material | [ A ]Accessories | ||
| Application | With Seal | No Seal | ||
| General | CFFH | CFAH | 52100 Bearing Steel | 1 Hex Nut (1045 Carbon Steel Carbon Steel, Black Oxide) |
| CFFSH | CFASH | 440C Stainless Steel Equivalent | 1 Hex Nut (304 Stainless Steel) | |
| Low Dust Generation | CFFCH | - | ||
| Heavy Load | CFFGH | - | 52100 Bearing Steel | 1 Hex Nut (1045 Carbon Steel Carbon Steel, Black Oxide) |
Specifications
| Part Number | - | D |
| CFFH20 | - | 52 |
| Part Number | D (Selectable) | MxPitch | B | B1 | L | d1 | ℓ | ℓ1 | r | f (Min.) | H | Mass (g) | Max. Tightening Torque (N • m) | Unit Price | |||||||
| Type | dh7 Tolerance | CFFH | CFFSH | CFFCH | CFFGH | CFAH | CFASH | ||||||||||||||
| (With Seal) CFFH CFFSH CFFCH CFFGH (No Seal) CFAH CFASH | 12 | 0 -0.018 | 30 | 12x1.5 | 14 | 15 | 40 | 3 | 14 | 6 | 1.5 | 20 | 6 | 105(107) | 29.4 | ||||||
| 32 | 115(117) | ||||||||||||||||||||
| 16 | 35 | 16x1.5 | 18 | 19.5 | 52 | 18 | 8 | 24 | 205(207) | 70.6 | |||||||||||
| 18 | 40 | 18x1.5 | 20 | 21.5 | 58 | 20 | 26 | 295(300) | 98 | ||||||||||||
| 20 | 0 -0.021 | 47 | 20x1.5 | 24 | 25.5 | 66 | 4 | 22 | 9 | 36 | 8 | 450(455) | 137 | ||||||||
| 52 | 525(530) | ||||||||||||||||||||
| 24 | 62 | 24x1.5 | 29 | 30.5 | 80 | 25 | 11 | 40 | 915(925) | 245 | |||||||||||
| 72 | 1150(1160) | ||||||||||||||||||||
| 30 | 80 | 30x1.5 | 35 | 37 | 100 | 32 | 15 | 2 | 46 | 1880(1890) | 480 | ||||||||||
| 85 | 1950(1960) | ||||||||||||||||||||
| 90 | 2000(2010) | ||||||||||||||||||||
Table1: Reference Data of Cam Followers| d-D | Standard | Heavy Load | |||||||||||||
| Basic Dynamic Load Rating C (kN) | Basic Static Load Rating Cor (kN) | Max. Allowable Load (kN) | Track Load Capacity(kN) | Max. Rotational Speed(rpm) | Mass (g) | Basic Dynamic Load Rating C (kN) | Basic Static Load Rating Cor (kN) | Max. Allowable Load (kN) | Track Load Capacity(kN) | Max. Rotational Speed with Seal (rpm) | Mass (g) | ||||
| (With Seal) | (No Seal) | ||||||||||||||
| Crowned | Flat | Crowned | Flat | ||||||||||||
| 3-10 | 1.47 | 1.18 | 0.36 | 0.37 | 1.37 | 32900 | 47000 | 4.5 | - | - | - | - | - | - | - |
| 4-12 | 2.06 | 2.05 | 0.78 | 0.47 | 1.76 | 25900 | 37000 | 7.5 | - | - | - | - | - | - | - |
| 5-13 | 3.14 | 2.77 | 1.42 | 0.53 | 2.25 | 20300 | 29000 | 10.5 | - | - | - | - | - | - | - |
| 6-16 | 3.59 | 3.58 | 2.11 | 1.08 | 3.43 | 17500 | 25000 | 18.5 | 6.94 | 8.5 | 2.11 | 1.08 | 3.43 | 7700 | 19 |
| 8-19 | 4.17 | 4.65 | 4.73 | 1.37 | 4.02 | 14000 | 20000 | 28.5 | 8.13 | 11.2 | 4.73 | 1.37 | 4.02 | 6090 | 29 |
| 10-22 | 5.33 | 6.78 | 5.81 | 1.67 | 4.7 | 11900 | 17000 | 45 | 9.42 | 14.3 | 5.81 | 1.67 | 4.7 | 5040 | 46 |
| 10-26 | 2.06 | 5.49 | 60 | 2.06 | 5.49 | 61 | |||||||||
| 12-30 | 7.87 | 9.79 | 9.37 | 2.45 | 7.06 | 9800 | 14000 | 105 | 13.4 | 19.8 | 9.37 | 2.45 | 7.06 | 4060 | 107 |
| 12-32 | 2.74 | 7.45 | 115 | 2.74 | 7.45 | 117 | |||||||||
| 16-35 | 12 | 18.3 | 17.3 | 3.14 | 11.2 | 7000 | 10000 | 205 | 20.6 | 37.6 | 17.3 | 3.14 | 11.2 | 3150 | 207 |
| 18-40 | 14.7 | 25.2 | 26.1 | 3.72 | 14.4 | 5950 | 8500 | 295 | 25.2 | 51.3 | 26.1 | 3.72 | 14.4 | 2660 | 300 |
| 20-47 | 20.7 | 34.8 | 32.1 | 7.15 | 21 | 4900 | 7000 | 450 | 33.2 | 64.8 | 32.1 | 7.15 | 21 | 2380 | 455 |
| 20-52 | 8.23 | 23.2 | 525 | 8.23 | 23.2 | 530 | |||||||||
| 24-62 | 30.6 | 53.2 | 49.5 | 10.5 | 34.2 | 4550 | 6500 | 915 | 46.7 | 92.9 | 49.5 | 10.5 | 34.2 | 2030 | 925 |
| 24-72 | 12.9 | 39.8 | 1150 | 12.9 | 39.8 | 1160 | |||||||||
| 30-80 | 45.4 | 87.6 | 73.7 | 14.9 | 52.6 | 3500 | 5000 | 1880 | 67.6 | 145 | 73.7 | 14.9 | 52.6 | 1610 | 1890 |
| 30-85 | 16.1 | 56 | 1950 | 16.1 | 56 | 1960 | |||||||||
| 30-90 | 17.3 | 59.3 | 2000 | 17.3 | 59.3 | 2010 | |||||||||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| CFAH20-52 |
| CFFH20-52 |
| CFFSH20-52 |
Loading...
More Information
Part Number Substitution Table for Cam Follower Standard Changes (D30~40, 52 only)| Type | Old Part Number (D30~40, 52) | New Part Number | ||
| Old Standard | Old Hex Socket Type |
Old Hex Socket on Thread | Hex Socket on Head and Shank | |
| Cam Followers | CFUR | CFUA | CFUB | CFUH |
| CFURS | CFUAS | - | CFUSH | |
| CFURC | CFUAC | - | CFUCH | |
| - | CFUAG | - | CFUGH | |
| CFU | CUA | - | CUH | |
| CFUS | CUAS | - | CUSH | |
| CFFR | CFFA | CFFB | CFFH | |
| CFFRS | CFFAS | - | CFFSH | |
| CFFRC | CFFAC | - | CFFCH | |
| - | CFFAG | - | CFFGH | |
| CFR | CFA | - | CFAH | |
| CFRS | CFAS | - | CFASH | |
Basic Information
| Category | Cam Followers | Roller Type | Flat Type | Tightening Method | Hex Socket on Thread Side |
|---|---|---|---|---|---|
| Roller Lining | None | Cam Follower Type | Standard | Shaft | Provided |
| Unit | Metric Series |
Specification/Dimensions
-
O.D. D(Ø)
-
Width B(mm)
-
Material
- Carbon Steel
- Stainless Steel
- Carbon Steel
-
Roller Guiding Method
- Retainer Type
- Full Roller Type
-
Allowable Rotational Speed(rpm)
-
Seals
- None
- Provided
-
Application
- General
- Heavy Load
- Low Particle (Dust)
-
type
- CFAH
- CFASH
- CFFCH
- CFFGH
- CFFH
- CFFSH
-
Thread Size on Cam Follower (M)(mm)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 8 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Cam Followers - Resin.
- Cam Followers - Resin, flat.
- Cam Followers - Urethane coated, hex keyway, crowned.
- Eccentric Cam Followers - For hex wrench, crowned.
- Cam followers - Thrust disc type, with cage, CFWBR series.
- Standard Type Cam Followers - Caged, shielded type, CFB series.
- Standard Type Cam Followers - Caged, with shield, CFBR series.
- Non-Separable Roller Trackers - Caged, with inner ring and shields, NARTR series.
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy