(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Conveyor Industrial Brushes - Pitch Configurable Roll Brush (Part Numbers)
Click this image to zoom it.
Move the mouse over the image to zoom
Pitch configurable roll brush to minimize the clogging.
- inCAD Components
Part Number
Configured Part Number is shown.
BRUSNP20-[50,60,80,100]-[100,150,250,350]-[20-320/5]-[20,40]
・Materials
| Type | [ M ]Brush Filament | [ M ]Pipe, Bushing, Connecting Part |
| BRUSNP | Nylon 6 | 304 Stainless Steel |
Specifications
| Part Number | - | D | - | L | - | L1 | - | P |
| BRUSNP20 | - | 60 | - | 250 | - | 200 | - | 20 |
■Pitch Configurable
I.D.Tolerance (Bushings)
| Part Number | D | L | L1 5mm Increment | P | V | h | d | H | M | Proper Motor Power (Unit: kW) [ ! ]Reference Value | |
| Type | D1 | ||||||||||
| BRUSNP | 20 | 50 | 100 150 250 350 | 20~320 [ ! ]L1≤L-30 | 20 40 | 12 | 5.5 | 0.3 | 13.5 | 4 | 0.4 |
| 60 | 14.5 | ||||||||||
| 80 | 23.5 | 0.75 | |||||||||
| 100 | 32.5 | ||||||||||
| L | V |
| 100 | H9 |
| 150 | |
| 250 | |
| 350 | +0.1/0 |
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Loading...
More Information
■Precaution for Use
①Brush's service life will vary depending on usage conditions and frequency. The filaments may break or fall out depending on usage condition. Do not unduly tug the filaments or disassemble the brush.
②Maximum temp limit for the filaments is 100°C. The filaments will melt and fall off at above 100°C.
③Nylon 6 dissolves in strong hydrochloric acid, sulfuric acid, formic acid, and phenolic acid.
④Brush press contact length should be 2mm or less. Do not press further than necessary.
⑤Use the brush at less than 1000rpm.
⑥Motor power values shown are experimental ones for reference only. Actual motor power needed may be larger depending on how the brush is used.
■Precaution for Use and Storage
①Beware of the deformation of the filaments in storage. If the brush is left in contact with workpieces while being stored, the filaments may be deformed plastically. Also avoid filament tips from contacts when storing brushes by themselves.
②Dry before storage.
③Remove any foreign objects from the brush.
④Do not use in high temp. environment or near fire.
①Brush's service life will vary depending on usage conditions and frequency. The filaments may break or fall out depending on usage condition. Do not unduly tug the filaments or disassemble the brush.
②Maximum temp limit for the filaments is 100°C. The filaments will melt and fall off at above 100°C.
③Nylon 6 dissolves in strong hydrochloric acid, sulfuric acid, formic acid, and phenolic acid.
④Brush press contact length should be 2mm or less. Do not press further than necessary.
⑤Use the brush at less than 1000rpm.
⑥Motor power values shown are experimental ones for reference only. Actual motor power needed may be larger depending on how the brush is used.
■Precaution for Use and Storage
①Beware of the deformation of the filaments in storage. If the brush is left in contact with workpieces while being stored, the filaments may be deformed plastically. Also avoid filament tips from contacts when storing brushes by themselves.
②Dry before storage.
③Remove any foreign objects from the brush.
④Do not use in high temp. environment or near fire.
Example
Basic Information
| Types | Roll Brush, Pitch Configurable Type |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Nylon Channel Brushes - Color Optional
- Channel Brush Accessory - Attachment Bracket, Horizontal Mount
- Conveyor Industrial Brushes - Roll Brush
- Conveyor Industrial Brushes - Interchangeable Roll Brushes
- Conveyor Brush Accessories - Attachment Brackets, Vertical Mount
- Conveyor Brush Accessories - Adjustable Attachment Brackets
- Conveyor Bearings - Engineering plastic, round type, threaded stem.
- Ball Roller - Carbon steel, model K-143.
Complementary Products
MISUMI Unit Example related to this product
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy