(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Can be used in combination with cylinder when a workpiece is hard to extract.
Part Number
Configured Part Number is shown.
Type | [ M ] Material | [ H ]Hardness | |
Threaded | Tapped | ||
YGID | YGIDB | 1045 Carbon Steel | Treated Hardness: 40~45HRC |
Type | [ M ] Material | [ H ]Hardness | |
Threaded | Tapped | ||
YGIDP | YGIDPB | 1045 Carbon Steel | Treated Hardness: 40~45HRC |
Part Number | - | P | - | B | - | L | - | A | - | E | - | M | ||||
Type | Tip Shape | D | ||||||||||||||
YGIDP | B | 20 | - | P12.8 | - | B30 | - | L100 | - | A30 | - | M8 |
M | Pitch | |
Threaded | Tapped | |
6 | 1.0 | - |
8 | 1.25 | |
10 | 1.5 | 1.25 |
14 | - | 1.5 |
18 | - | 1.5 |
P | H7 | ℓ1 | ℓ | *M1 Tapped (Set Screw) |
8 | +0.015 0 | 18 | 24 | M5 |
10 | +0.018 0 | 20 | 26 | M6 |
12 | 24 | 32 | ||
16 | 24 | 32 |
Part Number | P(H7) | L 1mm Increment | F 1mm Increment | M | ||||||||||
Type | Dg6 | Threaded | Tapped | |||||||||||
Holder (Threaded) (Tapped) | YGID YGIDB | 16 | -0.006 -0.017 | 8 | 70~200 | 5~25 | 6 | 8 | 10 | 8 | 10 | |||
20 | -0.007 -0.020 | 8 | 10 | 12 | 8 | 10 | 10 | 14 | ||||||
25 | 10 | 12 | 16 | 10 | 14 | 18 | ||||||||
30 | 12 | 16 |
Part Number | P 0.1mm Increment | B 1mm Increment | L 1mm Increment | A | E (Shape A) 1mm Increment | M | R | |||||||||
Type | Tip Shape | Dg6 | Threaded | Tapped | ||||||||||||
Integrated (Threaded) (Tapped) | YGIDP YGIDPB | A B | 12 | -0.006 -0.017 | 6.0~11.0 | 5~35 (B≤Px4) | 60~150 | 30 60 90 120 | 1~10 | 6 | 8 | 8 | 3 | |||
16 | 6.0~15.0 | 6 | 8 | 10 | 8 | 10 | ||||||||||
20 | -0.007 -0.020 | 6.0~16.0 | 8 | 10 | 10 | 14 | ||||||||||
25 | 16.0~24.0 | 10 | 14 | 18 | 4 | |||||||||||
30 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
YGID16-P8-L[70-200/1]-F[5-25/1]-M[6,8,10] |
YGID20-P[8,10,12]-L[70-200/1]-F[5-25/1]-M[8,10] |
YGID25-P[10,12,16]-L[70-200/1]-F[5-25/1]-M[8,10] |
YGID30-P[12,16]-L[70-200/1]-F[5-25/1]-M[8,10] |
YGIDPA12-P[6-11/0.1]-B[5-35/1]-L[60-150/1]-A[30,60,90,120]-E[1-10/1]-M[6,8] |
YGIDPA16-P[6-15/0.1]-B[5-35/1]-L[60-150/1]-A[30,60,90,120]-E[1-10/1]-M[6,8,10] |
YGIDPA20-P[6-16/0.1]-B[5-35/1]-L[60-150/1]-A[30,60,90,120]-E[1-10/1]-M[8,10] |
YGIDPA25-P[16-24/0.1]-B[5-35/1]-L[60-150/1]-A[30,60,90,120]-E[1-10/1]-M[8,10] |
YGIDPA30-P[16-24/0.1]-B[5-35/1]-L[60-150/1]-A[30,60,90,120]-E[1-10/1]-M[8,10] |
YGIDPB12-P[6-11/0.1]-B[5-35/1]-L[60-150/1]-A[30,60,90,120]-M[6,8] |
YGIDPB16-P[6-15/0.1]-B[5-35/1]-L[60-150/1]-A[30,60,90,120]-M[6,8,10] |
YGIDPB20-P[6-16/0.1]-B[5-35/1]-L[60-150/1]-A[30,60,90,120]-M[8,10] |
YGIDPB25-P[16-24/0.1]-B[5-35/1]-L[60-150/1]-A[30,60,90,120]-M[8,10] |
YGIDPB30-P[16-24/0.1]-B[5-35/1]-L[60-150/1]-A[30,60,90,120]-M[8,10] |
Loading...
Basic Shape | Jig Pin Without Collar | Head Shape | Round | Material | 1045 Carbon Steel |
---|---|---|---|---|---|
Surface Treatment | Plain | Heat Treatment | Immersion Quenching |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy