(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Large Head Locating Pins - Round or diamond shaped head, spherical tip and internally threaded shank.
- Volume Discount
- Lead Time Reduction
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
- METRIC
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
[ ! ]Some combinations are not available. Refer to the availability list to select the available combination.
| Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
| Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
| ① | O1 Tool Steel | - | Treated Hardness: 60~63HRC | JPQT | BB (Round) | JPQT | A (Round) D (Diamond) | FPQT | A (Round) D (Diamond) |
| ② | O1 Tool Steel | Hard Chrome Plating | Hardness: 50~55HRC Plating Hardness :750 HV min. | - | GJPQT | GFPQT | |||
| ③ | 304 Stainless Steel | - | - | SJPQT | SJPQT | SFPQT | |||
| ④ | 304 Stainless Steel | Hard Chrome Plating | Plating Hardness :750 HV min. | - | - | HFPQT | |||
| ⑤ | 440C or 420 Stainless Steel | - | Treated Hardness: 50~55HRC | CJPQT | CJPQT | CFPQT | |||
| ⑥ | O1 Tool Steel | Buffed Surface | Treated Hardness: 60~63HRC | - | MJPQT | MFPQT | |||
| ⑦ | O1 Tool Steel | Hard Chrome Plating + Buffed | Hardness: 50~55HRC Plating Hardness :750 HV min. | - | MGJPQT | MGFPQT | |||
| ⑧ | 440C or 420 Stainless Steel | Buffed Surface | Treated Hardness: 50~55HRC | - | MCJPQT | MCFPQT | |||
Specifications
| Part Number | - | P | - | L | - | B |
| JPQTA6 MFPQTA6 | - - | 10.0 P10.00 | - | L10 | - | B5.0 |
■P Selectable
| Part Number | P | L | B | M (Coarse) | ℓ | ||||||||||||||||
| Type | Shape | D | D Tolerance g6 | ||||||||||||||||||
| JPQT SJPQT CJPQT | BB (Round) | 6 | -0.004 -0.012 | 7 | 8 | 9 | 10 | 10 | 8 | M3 | 5 | ||||||||||
| 8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 15 | M5 | 8 | ||||||||||||
| 10 | 11 | 12 | 13 | 15 | 10 | ||||||||||||||||
| 12 | -0.006 -0.017 | 15 | 16 | ||||||||||||||||||
| 16 | 18 | 19 | 20 | 24 | 25 | 22 | M8 | 12 | |||||||||||||
■P Configurable
| Part Number | P 0.01mm Increment | L | B | M (Coarse) | ℓ | (W) | |||
| Type | Shape | D | D Tolerance g6 | ||||||
| JPQT GJPQT SJPQT CJPQT (Buff Finished) MJPQT MGJPQT MCJPQT | A (Round) D (Diamond) | 5 | -0.004 -0.012 | 5.50~ 8.00 | 10 | 6 | M2 | 3 | 2.2 |
| 6 | 6.50~10.00 | 8 | M3 | 5 | 3.0 | ||||
| 6T | M2.6 | 4 | |||||||
| 8 | -0.005 -0.014 | 9.00~13.00 | 15 | M5 | 8 | 3.5 | |||
| 8T | M4 | 6 | |||||||
| 10 | 11.00~15.00 | 10 | M5 | 8 | 4.0 | ||||
| 12 | -0.006 -0.017 | 13.00~16.00 | 5.0 | ||||||
| 13 | 14.00~18.00 | 22 | M8 | 10 | 5.5 | ||||
| 16 | 17.00~25.00 | 12 | 7.0 | ||||||
| 20 | -0.007 -0.020 | 22.00~30.00 | 30 | 15 | 9.0 | ||||
■P, L, B Configurable
[ ! ]Pins of D dimension with T have one size smaller thread diameter and larger wall thickness. (Actual D dimension is the number without "T".)
[ ! ]L dimension in ( ) is applicable to Diamond Shape.
[ ! ]Note the strength of under-head part. >> P.1309
[ ! ]Please confirm pilot hole depth on >> P.1309 Holes may go through.
* The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on MISUMI 2019 catalog P.4015).*Not applicable when using locking adhesives or lock washers.
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | ℓ | (W) | |||
| Type | Shape | D | D Tolerance g6 | ||||||
| FPQT GFPQT SFPQT HFPQT CFPQT (Buff Finished) MFPQT MGFPQT MCFPQT | A (Round) D (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 5(9) ~10 | 2.0~10.0 | M2 | 3 | 2.2 |
| 6 | 6.50~10.00 | 6(9) ~12 | 2.0~12.0 | M3 | 5 | 3.0 | |||
| 6T | M2.6 | 4 | |||||||
| 8 | -0.005 -0.014 | 9.00~13.00 | 8(12)~16 | 2.0~15.0 | M5 | 8 | 3.5 | ||
| 8T | 6(12)~16 | M4 | 6 | ||||||
| 10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | M5 | 8 | 4.0 | |||
| 10T | 6(12)~16 | M4 | 6 | ||||||
| 12 | -0.006 -0.017 | 13.00~16.00 | 12 ~24 | 3.0~20.0 | M5 | 8 | 5.0 | ||
| 12T | 8(12)~18 | M4 | 6 | ||||||
| 13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | M8 | 10 | 5.5 | |||
| 13T | 8(14)~20 | M6 | 9 | ||||||
| 16 | 17.00~25.00 | 16 ~32 | 5.0~20.0 | M8 | 12 | 7.0 | |||
| 16T | 10(14)~24 | M6 | 9 | ||||||
| 20 | -0.007 -0.020 | 22.00~30.00 | 20 ~40 | 5.0~20.0 | M8 | 12 | 9.0 | ||
| 20T | 12(18)~30 | M6 | 9 | ||||||
[ ! ]L dimension in ( ) is applicable to Diamond Shape.
[ ! ]Note the strength of under-head part. >> P.1309
[ ! ]Please confirm pilot hole depth on >> P.1309 Holes may go through.
* The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on MISUMI 2019 catalog P.4015).*Not applicable when using locking adhesives or lock washers.
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| CFPQTA5-P[5.5-8/0.01]-L[5-10/1]-B[1.5-15/0.1] |
| CFPQTA6-P[6.5-10/0.01]-L[6-12/1]-B[1.5-15/0.1] |
| CFPQTA6T-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| CFPQTA8-P[8.5-15/0.01]-L[8-16/1]-B[1.5-30/0.1] |
| CFPQTA8T-P[8.5-15/0.01]-L[6-16/1]-B[2-15/0.1] |
| CFPQTA10-P[11-15/0.01]-L[10-20/1]-B[3-30/0.1] |
| CFPQTA10T-P[11-17/0.01]-L[6-16/1]-B[3-20/0.1] |
| CFPQTA12-P[13-16/0.01]-L[12-24/1]-B[3-30/0.1] |
| CFPQTA12T-P[13-18/0.01]-L[8-18/1]-B[3-20/0.1] |
| CFPQTA13-P[14-18/0.01]-L[13-26/1]-B[5-30/0.1] |
| CFPQTA13T-P[14-20/0.01]-L[8-20/1]-B[5-20/0.1] |
| CFPQTA16-P[17-25/0.01]-L[16-32/1]-B[5-30/0.1] |
| CFPQTA16T-P[17-27/0.01]-L[10-24/1]-B[5-20/0.1] |
| CFPQTA20-P[22-30/0.01]-L[20-40/1]-B[5-30/0.1] |
| CFPQTA20T-P[22-30/0.01]-L[12-30/1]-B[5-20/0.1] |
| CFPQTD5-P[5.5-8/0.01]-L[9-10/1]-B[1.5-12/0.1] |
| CFPQTD6-P[6.5-10/0.01]-L[9-12/1]-B[1.5-12/0.1] |
| CFPQTD6T-P[6.5-10/0.01]-L[9-12/1]-B[1.5-12/0.1] |
| CFPQTD8-P[9-13/0.01]-L[12-16/1]-B[1.5-15/0.1] |
| CFPQTD8T-P[8.5-15/0.01]-L[12-16/1]-B[1.5-15/0.1] |
| CFPQTD10-P[11-15/0.01]-L[12-20/1]-B[3-20/0.1] |
| CFPQTD10T-P[11-17/0.01]-L[12-16/1]-B[3-20/0.1] |
| CFPQTD12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| CFPQTD12T-P[13-18/0.01]-L[12-18/1]-B[3-20/0.1] |
| CFPQTD13-P[14-18/0.01]-L[14-26/1]-B[5-20/0.1] |
| CFPQTD13T-P[14-20/0.01]-L[14-20/1]-B[5-20/0.1] |
| CFPQTD16-P[17-25/0.01]-L[16-32/1]-B[5-27/0.1] |
| CFPQTD16T-P[17-27/0.01]-L[14-24/1]-B[5-27/0.1] |
| CFPQTD20-P[22-30/0.01]-L[20-40/1]-B[5-30/0.1] |
| CFPQTD20T-P[22-30/0.01]-L[18-30/1]-B[5-30/0.1] |
| CJPQTA5-P[5.5-8/0.01] |
| CJPQTA6-[6.5-10/0.01] |
| CJPQTA6T-[6.5-10/0.01] |
| CJPQTA8-[9-13/0.01] |
| CJPQTA8T-[9-13/0.01] |
| CJPQTA10-[11-15/0.01] |
| CJPQTA12-[13-16/0.01] |
| CJPQTA13-[14-18/0.01] |
| CJPQTA16-[17-25/0.01] |
| CJPQTA20-[22-30/0.01] |
| CJPQTBB6-7 |
| CJPQTBB6-8 |
| CJPQTBB6-9 |
| CJPQTBB6-10 |
| CJPQTBB8-9 |
| CJPQTBB8-10 |
| CJPQTBB8-11 |
| CJPQTBB8-12 |
| CJPQTBB8-13 |
| CJPQTBB10-11 |
| CJPQTBB10-12 |
| CJPQTBB10-13 |
| CJPQTBB10-15 |
| CJPQTBB12-15 |
| CJPQTBB12-16 |
| CJPQTBB16-18 |
| CJPQTBB16-19 |
| CJPQTBB16-20 |
| CJPQTBB16-24 |
| CJPQTBB16-25 |
Loading...
Basic Information
| Basic Shape | Large Head | Head Tip Shape | Spherical Surface | Drive | No |
|---|---|---|---|---|---|
| Shank Style | Female Thread | Tolerance of Positioning Side Outer Diameter | 0/-0.01 | Shank Dia. Tolerance | g6 |
Stock
-
- Stock Item Only
Specification/Dimensions
-
Head Shape
-
Round -
Diamond
-
-
Heat Treatment
- No
- Hardened
-
Surface Finish
- None
- Hard Chrome Plating
- Buffing
- Hard Chrome Plating + Buff finished
- None
-
Positioning Side Outer Diameter P(mm)
-
Mounted Side Outer Diameter D(mm)
-
Thread Diameter M(mm)
-
Mounting Section Length L(mm)
-
Positioning Portion Length B(mm)
-
Thread Length ML(mm)
-
Dimension Configurable Type
- P Dimension Configurable
- P Dimension Fixed
- P, L, B Dimensions Configurable
-
Positioning Part Length B(mm)
-
type
- CFPQTA
- CFPQTD
- CJPQTA
- CJPQTBB
- CJPQTD
- FPQTA
- FPQTD
- GFPQTA
- GFPQTD
- GJPQTA
- GJPQTD
- HFPQTA
- HFPQTD
- JPQTA
- JPQTBB
- JPQTD
- MCFPQTA
- MCFPQTD
- MCJPQTA
- MCJPQTD
- MFPQTA
- MFPQTD
- MGFPQTA
- MGFPQTD
- MGJPQTA
- MGJPQTD
- MJPQTA
- MJPQTD
- SFPQTA
- SFPQTD
- SJPQTA
- SJPQTBB
- SJPQTD
-
Material
- Steel
- Stainless Steel
- Steel
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 12 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Shoulder Locating Pins - Round or diamond shaped head, tapered tip and internally threaded shank.
- Locating Pin Holders - Round flange, flat tip for screw mounting, straight shank.
- Inch Small Head Locating Pins - Round or diamond head, tapered tip, straight shank, configurable P dimension.
- Large Head Locating Pins - Round/diamond head, tapered tip, internally threaded shank, selectable tolerances.
- Large Head Locating Pins - Round head and externally threaded shank.
- Small Head Locating Pins - Round or diamond shaped head with tapered tip and straight shank.
- Stepped Locating Pins - For collet chucks, round head, flat tip, straight shank.
- Straight Locating Pins - Flat tip with vent hole, internally threaded shank, length (L) selectable.
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy