(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Casters - Swivel casters, with integrated leveler and configurable mounting holes.
Click this image to zoom it.
Move the mouse over the image to zoom
Mounting Holes Configurable Type usable for various frame units
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
*HCFTF500 is phenol (black).
*HCFTFD250 and 350 is gray.
*Pad is not included with No.500 type.
| Part Number | Wheel |
| Type | [ M ]Material (Color) |
| HCFTF | Nylon (Gray) |
| HCFTFM | MC Nylon (Blue) |
| HCFTFD | Electrically Conductive MC Nylon (Black) |
*HCFTFD250 and 350 is gray.
| No. | Main Body | Jack Bolt | Pad | ||
| [ M ]Material | [ S ]Surface Treatment | [ M ]Material | [ S ]Surface Treatment | [ M ]Material | |
| 60 130 | Aluminum Casting Alloy 383.0 | Black Paint | 1018 Carbon Steel | Trivalent Chromate | EPDM Synthetic Rubber |
| 250 350 | Low Carbon Steel | Trivalent Chromate (Black) | |||
| 500 | FCD Cast Iron45 | Black Paint | |||
Specifications
| Part Number | - | N | - | E | - | F | - | G | - | P | - | Q | - | R |
| HCFTF130 | - | 6 | - | E18 | - | F55 | - | G80 | - | P20 | - | Q55 | - | R70 |
| Part Number | N (Nominal Dia.) | Drilling Location 1mm Increment | Allowable Load | Mass (g) | |||
| Type | No. | E / P | F / G / Q / R | kgf | N | ||
| HCFTF | 60 | 5 6 | (5+N/2)~(25-N/2) | (45+N/2)~(90-N/2) | 60 | 588 | 600 |
| HCFTF HCFTFM HCFTFD | 130 | 6 8 10 | (45+N/2)~(120-N/2) | 130 | 1275 | 1100 | |
| HCFTF HCFTFM HCFTFD | 250 | (50+N/2)~(112-N/2) | 250 | 2451 | 1445 | ||
| 350 | (5+N/2)~(20-N/2) | (60+N/2)~(130-N/2) | 350 | 3432 | 2170 | ||
| HCFTF HCFTFM HCFTFD | 500 | 8 10 | (10+N/2)~(35-N/2) | (50+N/1)~(75-N/1) (120+N/1)~(150-N/1) | 500 | 4902 | 5600 |
Price list
| No. | HCFTF | HCFTFM | HCFTFD | |||
| Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | |
| 1~9 pc(s). | 10~20 | 1~9 pc(s). | 10~20 | 1~9 pc(s). | 10~20 | |
| 60 | 4,360 | 4,140 | - | - | - | - |
| 130 | 5,500 | 5,220 | 7,720 | 7,330 | 8,730 | 8,290 |
| 250 | 8,640 | 8,210 | 11,320 | 10,750 | 11,640 | 11,050 |
| 350 | 10,010 | 9,510 | 12,830 | 12,180 | 13,150 | 12,490 |
| 500 | 22,240 | 21,130 | 27,850 | 26,450 | 29,860 | 28,360 |
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| HCFTF60-[5,6]-E[8-22/1]-F[48-87/1]-G[48-87/1]-P[8-22/1]-Q[48-87/1]-R[48-87/1] |
| HCFTF130-[6,8,10]-E[8-22/1]-F[48-117/1]-G[48-117/1]-P[8-22/1]-Q[48-117/1]-R[48-117/1] |
| HCFTF250-[6,8,10]-E[8-22/1]-F[53-109/1]-G[53-109/1]-P[8-22/1]-Q[53-109/1]-R[53-109/1] |
| HCFTF350-[6,8,10]-E[8-17/1]-F[63-127/1]-G[63-127/1]-P[8-17/1]-Q[63-127/1]-R[63-127/1] |
| HCFTF500-[8,10]-E[15-31/1]-F[55-142/1]-G[55-142/1]-P[15-31/1]-Q[55-142/1]-R[55-142/1] |
| HCFTFD130-[6,8,10]-E[8-22/1]-F[48-117/1]-G[48-117/1]-P[8-22/1]-Q[48-117/1]-R[48-117/1] |
| HCFTFD250-[6,8,10]-E[8-22/1]-F[53-109/1]-G[53-109/1]-P[8-22/1]-Q[53-109/1]-R[53-109/1] |
| HCFTFD350-[6,8,10]-E[8-17/1]-F[63-127/1]-G[63-127/1]-P[8-17/1]-Q[63-127/1]-R[63-127/1] |
| HCFTFD500-[8,10]-E[15-31/1]-F[55-142/1]-G[55-142/1]-P[15-31/1]-Q[55-142/1]-R[55-142/1] |
| HCFTFM130-[6,8,10]-E[8-22/1]-F[48-117/1]-G[48-117/1]-P[8-22/1]-Q[48-117/1]-R[48-117/1] |
| HCFTFM250-[6,8,10]-E[8-22/1]-F[53-109/1]-G[53-109/1]-P[8-22/1]-Q[53-109/1]-R[53-109/1] |
| HCFTFM350-[6,8,10]-E[8-17/1]-F[63-127/1]-G[63-127/1]-P[8-17/1]-Q[63-127/1]-R[63-127/1] |
| HCFTFM500-[8,10]-E[15-31/1]-F[55-142/1]-G[55-142/1]-P[15-31/1]-Q[55-142/1]-R[55-142/1] |
Loading...
Example
Specify mounting hole positions in accordance with frame sizes. For Aluminum Extrusion Type, see >> Click here.
Technical Information
Wheel Performance Comparison
| Item | Synthetic Rubber | Urethane Rubber | MC Nylon | Nylon (White) | Phenol |
|---|---|---|---|---|---|
| Abrasion Resistance | Excellent | Excellent | Excellent | Good | Good |
| Oil Resistance | Acceptable | Good | Excelente | Excelente | Excellent |
| Water Resistance | Excellent | Good | Excellent | Excellent | Good |
| Cost | Excellent | Good | Acceptable | Excellent | Acceptable |
| Noise | Excellent | Good | Acceptable | Inefficient | Acceptable |
| Allowable Load | Acceptable | Excellent | Excellent | Acceptable | Excellent |
| Moving Resistance | Acceptable | Good | Excellent | Good | Excellent |
| Rubber Hardness Shore A | 70±5 | 90±5 | — | — | — |
| Operating Temperature | -5–60°C | -20–80°C | -20–120°C | -10–120°C | -40–180°C |
| Features | Natural rubber SBR, BR etc. are combined in the ideal formulas and are the most standard type as general wheels. | Excellent in abrasion and oil resistance. Low starting and running resistance. | Excellent in oil resistance and load resistance. Low starting and running resistance. | Excellent in oil resistance and water resistance. Low starting and running resistance. | Excellent in oil, heat and load resistance. Low starting resistance. |
| Item | Special Reinforced Plastic | Conductive Rubber | Conductive MC Nylon | PEEK | Casting |
|---|---|---|---|---|---|
| Abrasion Resistance | Acceptable | Excellent | Excellent | Good | Excellent |
| Oil Resistance | Good | Acceptable | Excellent | Excellent | Excellent |
| Water Resistance | Good | Excellent | Excellent | Good | Good |
| Cost | Good | Good | Acceptable | Acceptable | Good |
| Noise | Acceptable | Excellent | Acceptable | Acceptable | Inefficient |
| Allowable Load | Excellent | Acceptable | Excellent | Excellent | Excellent |
| Moving Resistance | Good | Acceptable | Excellent | Good | Good |
| Rubber Hardness Shore A | — | 75±5 | — | — | — |
| Operating Temperature | -20–80°C | -5–60°C | -20–120°C | -50–250°C | -40–200°C |
| Features | Wider footprint than conventional wheels, and suitable for heavy loads. Relatively low cost. | SBR rubber compounded with a larger amount of carbon black content, which works as earthing. | Antistatic grease is sealed. Ideal for environments where dust adhesion is prohibited. | Excellent in heat resistance. Available for use at high temperature. | Excellent in abrasion, heat and corrosion resistance. |
Support Information
Variety of Wheels
| Specification | Properties | Specification | Properties |
|---|---|---|---|
Direct Mounting | Commonly used casters directly mounted with plates on carriages and machines. | ||
Screw Fitting | Just screw into pipes, frames, etc, to mount | ||
With Adjustment Pad | Integrated pads secure the Casters on the floor. | ||
Dual Wheels | Dual Wheel Type excellent in swivel and capable of making small turns. | ||
Vibration Absorption | Good vibration absorption and less dust generation during moving. Best use for clean environments. | ||
Casting | The type with high durability in harsh environments compared to the press-formed caster products. |
| Allowable Load / Specification | Light Load | Light-Medium Load | Medium Load | Low Profile | Medium-Heavy Load | Heavy Load | Super Heavy Load | Ultra Heavy Load |
|---|---|---|---|---|---|---|---|---|
| 80~400N | 300~1800N | 800~3000N | 1600~3200N | 3000N | 3000~6000N | 4000~9000N | ~15000N | |
| Direct Mounting |  |  |  |  |  |  |  | |
| View all | View all | View all | View all | View all | View all | View all | ||
| Screw Fitting |  |  |  |  | ||||
| View all | View all | View all | View all | |||||
| With Adjustment Pad |  |  |  |  |  |  |  | |
| View all | View all | View all | View all | View all | View all | View all | ||
| Dual Wheels |  |  |  | |||||
| View all | View all | View all | ||||||
| Vibration Absorption |  |  | ||||||
| View all | View all | |||||||
| Casting |  |  | ||||||
| View all | View all |
Find out more technical details about the wheels Here.
Cautions
1. Allowable Load
The allowable loads shown in the tables of the catalog indicate the limit load that can be transported by human power on a fl at surface
To calculate the total load limit first define the weight of the load be carried, then select a wheel with the appropriate allowable load. Even if 4 wheels are used the total load can be supported at 3 points, so the total load limit is usually calculated by the following formula:
Where:
- Lc: Limit of Total Load.
- Cp: Allowable Load.
- n: Number of wheels (in this example its value would be 4).
- The value of 0.8 is the multiplication factor to determine the total load at 3 support points.
[!] When different sizes of casters are used in combination, calculation should be based on the caster with the smallest load capacity.
2. Operating Speed
Operating speed should be walking speed or slower in intermittent usage. Avoid powered pulling (except for some casters) and continuous operation that may cause heat generation.
| Wheel Diameter | Operating Speed |
|---|---|
| 75mm or less | 2km/h or less |
| 100mm or less | 4km/h or less |
3. Stoppers
Note that the performance may degrade without user attention due to wear and damages from long-term operation. Braking power generally depends on wheel materials. To ensure safe use, use wheel stops, floor stoppers, etc.
4. Operating Environment
It is assumed that the casters are used in normal temperature. (Excluding some casters) Avoid unusual environment that might be affected by high temperature, low temperature, high humidity, acidic, alkaline, salt, solvent, oil, seawater and chemical products, etc.
Compatible Models
Basic Information
| Caster Type | With Leveling Mounts | Stopper | Not Provided | Metal Piece(Fittings etc.,) Material | Steel |
|---|
Specification/Dimensions
-
Load Range(daN)
- 35.01 to 80.00
- 80.01 to 140.00
- 220.01 to 320.00
- 320.01 to 485.00
- 485.01 to 750.00
-
Allowable Load(daN)
-
Mounting Height H(mm)
-
Wheel Material
- Nylon
- Nylon
-
Wheel Characteristics
- Not Provided
-
Plate Length(mm)
-
Plate Width(mm)
-
Wheel Dia. D(φ)
-
Wheel Width B(mm)
-
E(mm)
-
F(mm)
-
G(mm)
-
P(mm)
-
Q(mm)
-
R(mm)
-
Through Hole Nominal Dia. Selection [N]
-
type
- HCFTF
- HCFTFD
- HCFTFM
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 11 Days or Less
- 16 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Casters - Fixed, steel, SKM series (medium loads).
- Casters - For scaffolding, with swivel plate, SJ series.
- Wheels - With fixed steel plate, N100K series double elastomer wheel.
- Casters - With steel swivel plate, double rubber caster, T130 series.
- Leveling Casters - Fixed Position Operating Lever And Integrated Truck Brake, With Top Plate Fitting, Ball Bearing, Blickle EasyRoll Black Rubber Tread On Black Nylon Core Wheel
- Leveling Casters - Fixed Position Lever, Truck Brake, Top Plate, Ball Bearing, Softhane Polyurethane Tread, Aluminum Wheel
- Leveling Casters - Following Swiveling Operating And Release Levers, With Top Plate Fitting, Plain Bore, Impact Resistant Heavy Duty White Nylon Wheel
- Leveling Casters - Fixed Foot And Height-Adjustable Wheels, With Top Plate Fitting, Ball Bearing, Blickle Extrathane Light Brown Polyurethane Tread On Aluminum Core Wheel
Complementary Products
MISUMI Unit Example related to this product
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy