(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Manual Stages - Configurable X/XY/Z-Axis Stages

Manual Stages - Configurable X/XY/Z-Axis Stages

Click this image to zoom it.

Move the mouse over the image to zoom

Selectable kinds of Feed Position, Feed/Clamping Methods and Grease.

(i)Caution

  • Delivery times for some of our products may be delayed as national government authorities have imposed limit of capacity at our production sites.
X/XY/Z-Axis Stages - Selectable:Related Image

Specifications

Part Number-①Feed Position-②Feeding Method-③Clamp Type-④Grease
FSXYR40-C-F-S-R
Part NumberStage Used
TypeAxisGuide
FSXRXSG(Click here)
CXPG(Click here)
XYRXYSG(Click here)
ZRZSG(Click here)
* Refer to the stage with the same size as the table.
Guide Type R: Linear Ball Slide
C: Cross Roller Slide
Slide Stage①Feed Position②Feeding Method③Clamp Type④Grease
AxisTypeSizeCenter / SideMicrometer Head (Stroke: mm)Feed Screw
(Pitch / Stroke: mm)
SelectionSelection
XFSXR
(Linear Ball)
25(Center): A AR
: AZ AZR
(Side): C CR
: CZ CZR  
N (Standard ±3.2)F (Hex Socket 0.5/±3.2)
B (Feed Screw 0.5/±3.2)
S (Standard)G (Standard)
R (Clean Env. Compatible) *2
40N (Standard ±6.5)
M (Coarse Fine Feed ±6.5)
F (Hex Socket 0.5/±6.5)
B (Feed Screw 0.5/±6.5)
J (Feed Screw 1.0/±6.5)
S (Standard)
H (Disc)
P (Opposed) Applicable only when C and CR, and the feed type is N or F.
50
60
70
80N (Standard ±12.5)
M (Coarse Fine Feed ±6.5)
D (Digital Micrometer ±12.5)
*1Only applicable to feed position A ,AR and C.
S (Standard)
H (Disc)
FSXC
(Cross Roller)
25(Center): A AR
: AZ AZR
(Side): C CR
: CZ CZR  
N (Standard ±3.2)F (Hex Socket 0.5/±3.2)
B (Feed Screw 0.5/±3.2)
S (Standard)G (Standard)
R (Clean Env. Compatible) *2
40N (Standard ±6.5)
M (Coarse Fine Feed ±6.5)
F (Hex Socket 0.5/±6.5)
B (Feed Screw 0.5/±6.5)
J (Feed Screw 1.0/±6.5)
S (Standard)
H (Disc)
P (Opposed) Applicable only when C and CR, and the feed type is N or F.
60
80N (Standard ±12.5)
M (Coarse Fine Feed ±6.5)
D (Digital Micrometer ±12.5)
*1Only applicable to feed position A ,AR and C.
S (Standard)
XYFSXYR
(Linear Ball)
25(Center): A AR
(Side): C CR
N (Standard ±3.2)F (Hex Socket 0.5/±3.2)
B (Feed Screw 0.5/±3.2)
S (Standard)G (Standard)
R (Clean Env. Compatible) *2
40N (Standard ±6.5)
M (Coarse Fine Feed ±6.5)
F (Hex Socket 0.5/±6.5)
B (Feed Screw 0.5/±6.5)
J (Feed Screw 1.0/±6.5)
S (Standard)
H (Disc)
P (Opposed) Applicable only when C and CR, and the feed type is N or F.
50
60
70
80N (Standard ±12.5)
M (Coarse Fine Feed ±6.5)
D (Digital Micrometer ±12.5)
*1Only applicable to feed position A ,AR and C.
S (Standard)
H (Disc) Only applicable to C, CR.
ZFSZR
(Linear Ball)
25(Center): AZ AZR
(Side): C CR
: CZ CZR
Feeding direction of C, CR is upward; that of the others is downwards.
N (Standard ±3.2)F (Hex Socket 0.5/±3.2)
B (Feed Screw 0.5/±3.2)
S (Standard)G (Standard)
R (Clean Env. Compatible) *2
40N (Standard ±6.5)
M (Coarse / Fine Feeds ±6.5)Not applicable to C, CR.
F (Hex Socket 0.5/±6.5)
B (Feed Screw 0.5/±6.5)
J (Feed Screw 1.0/±6.5)
S (Standard)H (Disc)
P (Opposed) Applicable only when C and CR, and the feed type is N and F.
50
60
70
80N (Standard ±12.5)
M (Coarse/Fine Feeds ±6.5) Not applicable to C, CR.
S (Standard)
H (Disc)
*1 Only clamp position will be changed for Digital Micrometer A and AR. *2 When feed type M (coarse / fine feeds) or D (digital micrometer) is selected, grease R (clean env. compatible) is not applicable.
[ ! ]Knob Cover HDCVR13 (Sold Separately): Ø13 mm knob diameter can be increased by installing the cover. >> Click here
[ ! ]Extension Cover HDEXT13 (Sold Separately): Ø13 mm head or feed screw knobs can be extended by installing the cover. >> Click here

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
FSXYR25-A-[B,​F,​N]-S-[G,​R]
FSXYR25-AR-[B,​F,​N]-S-[G,​R]
FSXYR25-C-[B,​F,​N]-S-[G,​R]
FSXYR25-CR-[B,​F,​N]-S-[G,​R]
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSTravel Distance (X Distance) (Selection Range)
(mm)
Travel Distance (Y Distance) (Selection Range)
(mm)
Load Capacity (Range)
(N)
Table Size (Length) L (Range)
(mm)
Table Size (Width) W (Range)
(mm)
Table Size (Thickness) H (Range)
(mm)
Guiding Mechanism Table Material Table Surface Treatment Table Size (Length) L
(mm)
Table Size (Width) W
(mm)
Allowable Load
(N)
Travel Distance (X Distance)
(mm)
Travel Distance (Y Distance)
(mm)
Table Size (Thickness) H
(mm)
Travel Distance (Z Distance)
(mm)
Table Parallelism
(µm)
Moment Rigidity (Pitching)
("/N•cm)
Moment Rigidity (Yawing)
("/N•cm)
Moment Rigidity (Rolling)
("/N•cm)
Feed Knob Position Reversed Grease Selection Clamp Method Selection Feeding Method Selection
1 Piece(s)

10 Days or more

10~ ±10mm~ ±10mm30.1~50~25~2520.1~25Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating252538.2±3.2±3.224-3032.23.00CenterStandardG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]
1 Piece(s)

10 Days or more

10~ ±10mm~ ±10mm30.1~50~25~2520.1~25Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating252538.2±3.2±3.224-3032.23.00CenterRight and LeftG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]
1 Piece(s)

10 Days or more

10~ ±10mm~ ±10mm30.1~50~25~2520.1~25Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating252538.2±3.2±3.224-3032.23.00SideStandardG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]
1 Piece(s)

10 Days or more

10~ ±10mm~ ±10mm30.1~50~25~2520.1~25Linear Ball[Stainless Steel] 440C Stainless SteelElectroless Nickel Plating252538.2±3.2±3.224-3032.23.00SideRight and LeftG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]

Loading...

  1. 1

More Information

X/XY/Z-Axis Stages - Selectable:Related Image

(XSG>>Click here and XPG>>Click here)

(ZSG>>Click here and ZPG>>Click here)

■Other Information about Stages
Stage Selection Table Click here, Click here
Overview, Technical Information Click here, Click here
 

Basic Information

Through Hole (Table Center Hole) No

Additional Products in this Category

Complementary Products

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.