(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
•Shape: Push Up Type
•Wrench Hole Shape: Hex
•Body Material: 304 Stainless Steel
•Initial Load (Range) (n): 0.01~50
•Pin Plunger Type: Spherical
Part Number
Configured Part Number is shown.
PJLW16-10
Load Category | Type | Body | Nose | Spring | Operating Temperature | ||
[ M ]Material | [ M ]Material | [ H ]Hardness | [ M ]Material | ||||
Stainless Steel Nose | Ultra Light Load | PJLSW | 304 Stainless Steel | 440C Stainless Steel | 55HRC~ | 631 Stainless Steel | -30~260°C |
Light Load | PJLW | ||||||
Heavy Load | PJHW | ||||||
Extra Heavy Load | PJXW | ||||||
Plastic Nose | Ultra Light Load | PJLSK | Polyacetal | - | -30~80°C | ||
Light Load | PJLK | ||||||
Heavy Load | PJHK | ||||||
Extra Heavy Load | PJXK |
Part Number |
PJLW12-5 |
Part Number | d | ℓ | L | B | Ultra Light Load (PJLSW, PJLSK) | Light Load (PJLW, PJLK) | Heavy Load (PJHW, PJHK) | Extra Heavy Load (PJXW, PJXK) | ||||||||||||||
Type | M (Coarse) | S | min. | N Load | max. | min. | N Load | max. | min. | N Load | max. | min. | N Load | max. | ||||||||
(Stainless Steel Tip) PJLSW PJLW PJHW PJXW (Plastic Tip) PJLSK PJLK PJHK PJXK | 3 | 1.5 | 1.0 | 15 | 15 | 0.9 | 0.12 | 0.4 | 0.4 | 1.3 | 0.8 | 2.94 | 1.1 | 3.42 | ||||||||
3 | 15 | 15 | 0.12 | 0.4 | 0.2 | 1.3 | 0.6 | 2.93 | 0.8 | 3.41 | ||||||||||||
4 | 2 | 1.6 | 15 | 15 | 1.3 | 0.27 | 0.65 | 0.9 | 2.0 | 2.0 | 8.8 | 6.1 | 13.8 | |||||||||
4 | 24 | 24 | 0.18 | 0.65 | 0.6 | 2.1 | 1.9 | 8.75 | 5.8 | 13.6 | ||||||||||||
5 | 3 | 2.0 | 20 | 20 | 1.5 | 0.4 | 3 | 1.4 | 9.7 | 2.7 | 16.3 | 6.8 | 22.0 | |||||||||
5 | 27 | 27 | 0.35 | 3 | 1.1 | 10.3 | 1.0 | 17.1 | 5.7 | 21.5 | ||||||||||||
6 | 3 | 2.5 | 25 | 25 | 2 | 1.8 | 3.05 | 6.0 | 9.8 | 8.0 | 26.4 | 15.8 | 35.6 | |||||||||
5 | 30 | 30 | 1.5 | 3.05 | 3.4 | 9.86 | 4.4 | 26.6 | 12.9 | 34.4 | ||||||||||||
8 | 3 | 3.1 | 25 | 25 | 2.5 | 1.9 | 3.15 | 6.0 | 9.9 | 14.7 | 27.0 | 21.9 | 36.3 | |||||||||
5 | 27 | 27 | 1.4 | 3.15 | 4.0 | 9.83 | 6.7 | 26.6 | 14.7 | 34.5 | ||||||||||||
10 | 5 | 3.8 | 30 | 30 | 3 | 1.6 | 4.6 | 5.7 | 14.7 | 8.2 | 45.7 | 24.5 | 58.6 | |||||||||
10 | 30 | 43 | 1.6 | 4.6 | 4.4 | 14.7 | 6.2 | 45.1 | 19.8 | 58.7 | ||||||||||||
12 | 5 | 5.5 | 30 | 30 | 4 | 1.7 | 4.7 | 5.8 | 14.7 | 18.2 | 49.0 | 34.9 | 63.6 | |||||||||
10 | 35 | 43 | 1.6 | 4.7 | 5.0 | 14.7 | 8.2 | 49.1 | 25.5 | 63.6 | ||||||||||||
15 | 35 | 51 | 1.8 | 4.7 | 6.9 | 14.7 | 7.5 | 48.9 | 20.1 | 63.7 | ||||||||||||
16 | 10 | 8.0 | 35 | 57 | 5 | 2.8 | 10.8 | 9.2 | 34.2 | 18.9 | 68.5 | 38.7 | 88.4 | |||||||||
15 | 35 | 57 | 2.6 | 10.8 | 8.6 | 34.4 | 14.4 | 68.6 | 33.9 | 88.1 | ||||||||||||
20 | 35 | 65 | 2 | 11 | 7.1 | 34.4 | 4.2 | 68.6 | 25.4 | 88.1 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Loading...
Body Material | 304 Stainless Steel | Mounting Method | Screw-In | Thread Locking Compound | No |
---|---|---|---|---|---|
Pin Plunger Type | Spherical Type | Wrench Hole Shape | Hex | Main Body Surface Treatment | No |
Surface Treatment of Pin | No | Initial Load (Range)(N) | 0.01~50 |
Please check the type/dimensions/specifications of the part PJLW16-10 in the Spring Plungers - In stainless steel. series.
Part Number |
---|
PJHK12-15 |
PJHK12-5 |
PJHK16-10 |
PJLW16-15 |
PJLW16-20 |
PJLW3-1.5 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy