(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
•Shape: Push Up Type
•Wrench Hole Shape: Hex
•Body Material: 1045 Carbon Steel
•Initial Load (Range) (n): 0.01~50
•Pin Plunger Type: Spherical
Part Number
Configured Part Number is shown.
NPJL3-1.5
Load Category | Type | Body | Pin | Spring | Operating Temperature | ||||||
Standard | No Thread Locking Compound | [ M ]Material | [ H ]Hardness | [ S ]Surface Treatment | [ M ]Material | [ H ]Hardness | [ S ]Surface Treatment | [ M ]Material | |||
Steel Nose | Ultra Light Load | PJS | PJS-N | 1045 Carbon Steel | 29~35HRC | Black Oxide | 1045 Carbon Steel | 57~63HRC (Carburized) | Trivalent Chromate | SWP-B | -30~80°C |
Light Load | PJL | PJL-N | |||||||||
Heavy Load | PJH | PJH-N | Black Oxide | ||||||||
Extra Heavy Load | PJX | PJX-N | Nickel Plating | ||||||||
Plastic Tip | Ultra Light Load | NPJS | NPJS-N | Black Oxide | Polyacetal | - | - | ||||
Light Load | NPJL | NPJL-N | |||||||||
Heavy Load | NPJH | NPJH-N | |||||||||
Extra Heavy Load | NPJX | - | Nickel Plating |
Part Number |
NPJH3-1.5 PJS-N10-5 |
Part Number | d | ℓ | L | B | Ultra Light Load | Light Load | Heavy Load | Extra Heavy Load | |||||||||||||||
Type | M (Coarse) | S | Ultra Light / Light / Heavy Load | Extra Heavy Load | min. | N Load | max. | min. | N Load | max. | min. | N Load | max. | min. | N Load | max. | |||||||
(Steep Tip) PJS (*only) PJL PJH PJX (*only) (Plastic Tip) NPJS (*only) NPJL (*only) NPJH (*only) NPJX (*only) [ ! ]ℓ dimensions with ( ) are applicable to the Extra Heavy Load Type. | 3 | ** 1.5 | 1.1 | 10(15) | 10 | 15 | 0.9 | 0.05 | 0.32 | 0.44 | 1.6 | 0.9 | 4.2 | 2.5 | 5.1 | ||||||||
** 3 | 1.1 | 15(20) | 15 | 20 | 0.9 | 0.09 | 0.32 | 0.29 | 1 | 1.1 | 4.9 | 2.5 | 6.8 | ||||||||||
4 | ** 2 | 1.6 | 15(24) | 15 | 24 | 1.3 | 0.23 | 0.65 | 0.9 | 4.1 | 1.9 | 8.7 | 6.3 | 15.3 | |||||||||
** 4 | 1.6 | 24 | 24 | 24 | 1.3 | 0.24 | 0.65 | 0.7 | 2.2 | 0.29 | 8.3 | 4.8 | 15 | ||||||||||
5 | ** 3 | 2.0 | 20(27) | 20 | 27 | 1.5 | 0.74 | 2.95 | 1.5 | 9.8 | 2 | 22.5 | 11 | 30.4 | |||||||||
** 5 | 2.0 | 27(39) | 27 | 39 | 1.5 | 0.72 | 2.95 | 1.6 | 10.4 | 2.5 | 23.4 | 11.6 | 31.5 | ||||||||||
6 | ** 3 | 2.5 | 25(30) | 25 | 30 | 2 | 0.85 | 3.2 | 3.4 | 10.4 | 12.5 | 33.8 | 17.2 | 46.6 | |||||||||
** 5 | 2.5 | 30(36) | 30 | 36 | 2 | 0.85 | 3.2 | 1.9 | 9.7 | 6.2 | 32.6 | 16.8 | 47.4 | ||||||||||
10 | 2.5 | 30 | 39 | - | 2 | - | - | 1.5 | 10.9 | 5 | 32.7 | - | - | ||||||||||
8 | ** 3 | 3.1 | 25(27) | 25 | 27 | 2.5 | 0.9 | 3.3 | 3.5 | 9.4 | 11.7 | 31.2 | 28.1 | 56.9 | |||||||||
** 5 | 3.1 | 27(30) | 27 | 35 | 2.5 | 0.9 | 3.3 | 2.9 | 9.6 | 8.3 | 31.9 | 10.5 | 39.9 | ||||||||||
10 | 3.1 | 30 | 43 | - | 2.5 | - | - | 3.1 | 11.2 | 8.4 | 36.4 | - | - | ||||||||||
10 | ** 5 | 3.8 | 30 | 30 | 35 | 3 | 1.9 | 4.7 | 2.6 | 14.1 | 11.4 | 51 | 17 | 73.7 | |||||||||
** 10 | 3.8 | 30 | 43 | 53 | 3 | 1.7 | 4.7 | 2.9 | 14.6 | 9.5 | 60.8 | 13.7 | 75.5 | ||||||||||
15 | 3.8 | 30 | 58 | - | 3 | - | - | 3.4 | 17 | 7.2 | 57.3 | - | - | ||||||||||
12 | ** 5 | 5.5 | 30(35) | 30 | 43 | 4 | 1.5 | 4.7 | 3.5 | 17.1 | 5.6 | 41 | 35.3 | 107.9 | |||||||||
** 10 | 5.5 | 35 | 43 | 58 | 4 | 1.3 | 5.9 | 2.5 | 21.1 | 5.2 | 55.9 | 12.7 | 107.9 | ||||||||||
** 15 | 5.5 | 35 | 51 | 78 | 4 | 1.6 | 5.9 | 2.3 | 19.4 | 5.1 | 53.6 | 16.7 | 140.2 | ||||||||||
20 | 5.5 | 35 | 78 | - | 4 | - | - | 4.1 | 22.5 | 8.7 | 56.1 | - | - | ||||||||||
16 | ** 10 | 8 | 35 | 60 | 60 | 5 | 1.7 | 12.8 | 12.1 | 38 | 26.5 | 78 | 29.6 | 157.9 | |||||||||
** 15 | 8 | 35 | 60 | 70 | 5 | 1.7 | 12.8 | 9.7 | 39.7 | 14.2 | 79.4 | 10 | 142.2 | ||||||||||
** 20 | 8 | 35 | 85 | 90 | 5 | 1.7 | 12.8 | 8.6 | 40.1 | 16.8 | 80.4 | 4.3 | 146.1 | ||||||||||
* 30 | 8 | 35 | 125 | 125 | 5 | - | - | 17 | 38 | 19.8 | 81.2 | 5.2 | 140.7 | ||||||||||
40 | 8 | 35 | 125 | - | 5 | 5.5 | 41.2 | 7.6 | 84.3 | - | - | ||||||||||||
50 | 8 | 35 | 155 | 5 | 4.4 | 48.3 | 7.5 | 78.8 | |||||||||||||||
60 | 8 | 35 | 159 | 5 | 4.1 | 49.6 | 6.4 | 78.1 | |||||||||||||||
70 | 8 | 35 | 185 | 5 | 3.1 | 55.7 | 4.3 | 95 | |||||||||||||||
80 | 8 | 35 | 185 | 5 | 2.5 | 51.3 | 3.2 | 103.5 | |||||||||||||||
20 | * 15 | 10 | 45 | 60 | 80 | 6 | 14.4 | 79.4 | 22.5 | 147.1 | 14.5 | 274.6 | |||||||||||
20 | 10 | 45 | 72 | - | 6 | 13.9 | 83.4 | 23 | 157.9 | - | - | ||||||||||||
30 | 10 | 45 | 96 | 6 | 13.6 | 88.3 | 18.6 | 154 | |||||||||||||||
40 | 10 | 45 | 120 | 6 | 13.4 | 109.8 | 26.8 | 195.1 | |||||||||||||||
24 | 7 | 10 | 45 | 60 | - | 10 | - | - | 27.8 | 65.9 | 40.7 | 127.9 | |||||||||||
* 15 | 10 | 45 | 60 | 84 | 10 | 25.5 | 106.9 | 46.9 | 226.5 | 55.1 | 375.2 | ||||||||||||
20 | 10 | 45 | 75 | - | 10 | 15.3 | 101 | 43.1 | 224.6 | - | - | ||||||||||||
30 | 10 | 45 | 100 | 10 | 19.1 | 100 | 47.8 | 231.4 | |||||||||||||||
40 | 10 | 45 | 124 | 10 | 17.1 | 98.1 | 44.1 | 225.5 | |||||||||||||||
30 | 15 | 14 | 45 | 66 | 14 | 9.3 | 104.4 | 32.4 | 259.9 | ||||||||||||||
20 | 14 | 45 | 78 | 14 | 55.2 | 156.9 | 72.6 | 356.5 | |||||||||||||||
30 | 14 | 45 | 100 | 14 | 28.4 | 128.3 | 41.6 | 290.3 | |||||||||||||||
40 | 14 | 45 | 123 | 14 | 14.7 | 109.2 | 44.4 | 303 |
Part Number | d | ℓ | L | B | Ultra Light Load | Light Load | Heavy Load | Extra Heavy Load | |||||||||||||||
Type | M (Coarse) | S | Ultra Light / Light / Heavy Load | Extra Heavy Load | min. | N Load | max. | min. | N Load | max. | min. | N Load | max. | min. | N Load | max. | |||||||
(Steep Tip) PJS-N PJL-N PJH-N PJX-N (Plastic Tip) NPJS-N NPJL-N NPJH-N [ ! ]ℓ dimensions with ( ) are applicable to the Extra Heavy Load Type. | 5 | 3 | 2.0 | 20(27) | 20 | 27 | 1.5 | 0.74 | 2.95 | 1.5 | 9.8 | 2 | 22.5 | 11 | 30.4 | ||||||||
5 | 2.0 | 27(39) | 27 | 39 | 1.5 | 0.72 | 2.95 | 1.6 | 10.4 | 2.5 | 23.4 | 11.6 | 31.5 | ||||||||||
6 | 3 | 2.5 | 25(30) | 25 | 30 | 2 | 0.85 | 3.2 | 3.4 | 10.4 | 12.5 | 33.8 | 17.2 | 46.6 | |||||||||
5 | 2.5 | 30(36) | 30 | 36 | 2 | 0.85 | 3.2 | 1.9 | 9.7 | 6.2 | 32.6 | 16.8 | 47.4 | ||||||||||
8 | 3 | 3.1 | 25(27) | 25 | 27 | 2.5 | 0.9 | 3.3 | 3.5 | 9.4 | 11.7 | 31.2 | 28.1 | 56.9 | |||||||||
5 | 3.1 | 27(30) | 27 | 35 | 2.5 | 0.9 | 3.3 | 2.9 | 9.6 | 8.3 | 31.9 | 10.5 | 39.9 | ||||||||||
10 | 5 | 3.8 | 30 | 30 | 35 | 3 | 1.9 | 4.7 | 2.6 | 14.1 | 11.4 | 51 | 17 | 73.7 | |||||||||
10 | 3.8 | 30 | 43 | 53 | 3 | 1.7 | 4.7 | 2.9 | 14.6 | 9.5 | 60.8 | 13.7 | 75.5 | ||||||||||
12 | 5 | 5.5 | 30(35) | 30 | 43 | 4 | 1.5 | 4.7 | 3.5 | 17.1 | 5.6 | 41 | 35.3 | 107.9 | |||||||||
10 | 5.5 | 35 | 43 | 58 | 4 | 1.3 | 5.9 | 2.5 | 21.1 | 5.2 | 55.9 | 12.7 | 107.9 | ||||||||||
15 | 5.5 | 35 | 51 | 78 | 4 | 1.6 | 5.9 | 2.3 | 19.4 | 5.1 | 53.6 | 16.7 | 140.2 | ||||||||||
16 | 10 | 8 | 35 | 60 | 60 | 5 | 1.7 | 12.8 | 12.1 | 38 | 26.5 | 78 | 29.6 | 157.9 | |||||||||
15 | 8 | 35 | 60 | 70 | 5 | 1.7 | 12.8 | 9.7 | 39.7 | 14.2 | 79.4 | 10 | 142.2 | ||||||||||
20 | 8 | 35 | 85 | 90 | 5 | 1.7 | 12.8 | 8.6 | 40.1 | 16.8 | 80.4 | 4.3 | 146.1 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
NPJL3-1.5 |
Loading...
Body Material | 1045 Carbon Steel | Mounting Method | Screw-In | Pin Plunger Type | Spherical Type |
---|---|---|---|---|---|
Wrench Hole Shape | Hex |
Please check the type/dimensions/specifications of the part NPJL3-1.5 in the Spring Plungers - Standard. series.
Part Number |
---|
NPJH-N12-15 |
NPJH-N12-5 |
NPJH-N16-10 |
NPJL3-3 |
NPJL4-2 |
NPJL4-4 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy