(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Miniature Linear Guides - Long block, with holes for dowel bolts.

Miniature Linear Guides - Long block, with holes for dowel bolts.

Miniature stainless steel linear guides with long block. Its length gives it a greater allowable moment load. Adds holes for Dowel bolts, which reduce assembly time with other equipment and improve position repeatability. Selectable type of lubricant. Blocks and rails cannot be purchased separately.

  • inCAD Components

(i)Caution

  • The appearance of this product has changed as of September 2017.
    About Misumi Linear Guide Exterior Change
  • Delivery times for some of our products may be delayed as national government authorities have imposed limit of capacity at our production sites.

PDFP.2019-622

Unit examples related to this product
Miniature Linear Guides - Long Block with Dowel Holes:Related Image

[ ! ]For L Confi gurable, G dimensions differ from those shown in the table below. For details, Click here.
・Materials
[ M ] Material
[ H ] Hardness
TypeMX
(Lubrication Unit)
L DimensionNumber of Blocks
Light Preload
High Grade
Standard MaterialsStainless Steel
56HRC~
SSELBNBlank: None
-MX: Provided
Selectable1
SSEL2BN2
SSELBNLConfigurable1
SSEL2BNL2
 Carbon Steel
58HRC~
SELBN-Selectable1
SEL2BN2
SELBNLConfigurable1
SEL2BNL2
Heat Resistant Temperature: -20 ~ 80°C

Specifications



[ ! ]For L Confi gurable, G dimensions differ from those shown in the table below. For details, Click here.
 
Part NumberLBlock DimensionDowel Hole DimensionsGuide Rail Dimension
TypeMXHWL1BCSxℓL2KCbNC2(ℓ1)W1W2H1CaCounterbored HoleFG
d1xd2xh
Stainless Steel
Standard Specifications
SSELBN
SSEL2BN
SSELBNL
SSEL2BNL
Carbon Steel

SELBN
SEL2BN
SELBNL
SEL2BNL
-840~130
(100)
17321213M2x2.5226.50.38.5132754.70.32.4x4.2x2.3155
Blank: None
-MX: Provided
1055~275
(115)
20401516M3x3297.80.310162.595.55.50.33.5x6x3.5207.5
1370~470
(120)
2745.82020M3x3.531.8100.513.5203127.57.50.53.5x6x4.52510
16110~670
(150)
3258.32525M3x443.3120.516254158.59.50.53.5x6x4.54015
20160~700
(220)
4067.73030M4x652.3150.5203042010110.56x9.5x5.56020
[ ! ]! L Dimension: Dimensions in () are for the minimum rail length of the 2-Block Type

Materials

[ M ] Material
[ H ] Hardness
TypeMX
(Lubrication Unit)
L DimensionNumber of Blocks
Light Preload
High Grade
Stainless Steel
56HRC min.
SSELBNBlank: None
-MX: Provided
Selectable1
SSEL2BN2
SSELBNLConfigurable1
SSEL2BNL2
Heat Resistant Temperature: -20 ~ 80°C
 
Part Number-L 
SSELBN10
Miniature Linear Guides - Long Block with Dowel Holes:Related ImageSSELBN10L
Miniature Linear Guides - Long Block with Dowel Holes:Related ImageSSELBN10G
-
-
-
275
75
75

(L Type Greased)
(G Type Greased)
Alternative grease types available.
For Days to Ship, Price and Performance, please configure online.
 
■Precautions for Use
[ ! ]Blocks are equipped with retainers (wire) to prevent balls from falling out.
For proper block handling, Click here.
[ ! ]Radial clearances and accuracies are not guaranteed if the blocks and rails are interchanged from the original set combinations.
[ ! ]Straight grooves are provided on datum planes. Be sure to match the datum lines when using.
[ ! ]Rails cannot be connected end to end.
[ ! ]The accuracy of Linear Guides is guaranteed after mounting the rail (after fastening screws on the rail and pushing it onto the datum plane).
Minor bending of the rail will be adjusted after being mounted and will not affect the performance.
■Accessories
· H8 comes with cap screws (M2x6).

■Others
· Filled with Lithium soap based grease (Multemp Grease PS2 by Kyodo Yushi Co., Ltd. ).
· For operating life calculations please Click here, or by using our free software at, http://www.misumiusa.com/lg-bs_software/
· The MX type is greased with a lithium complex grease (TOUGHLIX GREASE MP2, made by JXTG Nippon Oil & Energy Corporation).

Price list

HLUnit Price
Stainless SteelCarbon Steel
SSELBNSSEL2BNSELBNSEL2BN
840 - -
55 - -
70 - -
85 - -
100    
115    
130    
1055 - -
75 - -
95 - -
115    
135    
155    
175    
195    
215    
235    
255    
275    
1370 - -
95 - -
120    
145    
170    
195    
220    
245    
270    
295    
320    
345    
370    
395    
420    
445    
470    
16110 - -
150    
190    
230    
270    
310    
350    
390    
430    
470    
510    
550    
590    
630    
670    
20160 - -
220    
280    
340    
400    
460    
520    
580    
640    
700    

■L Dimension Configurable Type (1mm Increment)
HUnit Price
Stainless SteelCarbon Steel
SSELBNLSSEL2BNLSELBNLSEL2BNL
8    
10    
13    
16    
20    
[ ! ]For calculation of L Dimension Configurable Type pricing, please use website.http://www.misumiusa.com/lg-bs_software/

■Additional Block Price
HB3: Price AdderB4: Price Adder
Stainless SteelCarbon SteelStainless SteelCarbon Steel
8  --
10    
13    
16    
20    

Alterations

Miniature Linear Guides - Long Block with Dowel Holes:Related Image

More Information

Miniature Linear Guides - Long Block with Dowel Holes:Related Image
Miniature Linear Guides - Long Block with Dowel Holes:Related Image 
Miniature Linear Guides - Long Block with Dowel Holes:Related Image
■Selectable Shortest Rail Length for B3/B4
HB3
(3-block)
B4
(4-block)
8115-
10155195
13170220
16230270
20280340
Miniature Linear Guides - Long Block with Dowel Holes:Related Image

Technical Information

Characteristics of Linear Guides

  • Linear guides utilize steel balls that roll on ground raceways, and the balls are recirculated using plastic return caps.
  • End seals prevent foreign materials from entering into the blocks.
  • Load ratings are the same for all four directions (radial, reverse-radial, and lateral directions). Can be used in any orientation.

Preload (Radial Clearance)

Type of guidePreloadHeight H
Dimension
Radial Clearance
(µm)
Miniature Linear GuideLight Preload6 ~ 20-3 ~ 0
Slight Clearance0 ~ 15
  • Clearance and preload of MISUMI Linear Guides are controlled with minute ball size adjustments.
  • Increased rigidity and reduced elastic deformation will result by preloading (negative clearance).
  • In general, selecting some preloads would have a positive effect on the accuracy and service life of the Linear Guides.
  • Blocks and rails manufactured by MIUSMI guarantee their own radial clearance (preload) and accuracy as sets of blocks and rails. Be sure to use the blocks and rails in sets.

Types of Greases

The following types of greases are used in MISUMI linear guides.

GreaseLinear GuideGrease ModelFeatures
StandardMiniatureMultemp Grease PS2 (Manufactured by Kyodo Yushi)Grease with excellent low temperature and low torque properties.
Miniature with MX lubrication unitTufflix MP2 (Manufactured by JX Nippon Oil & Energy)Reduces temperature rise in the bearing area; extends bearing life and reduces grease replenishment interval and maintenance work.
Medium Load
Heavy Load
Albania Grease S2 (Manufactured by Showa Shell Sekiyu)It has excellent lubrication and shows excellent performance under normal and heavy load conditions.
Type LMiniature/Medium/Heavy LoadET-100K (Manufactured by Kyodo Yushi)It has excellent heat resistance, oxidation stability, adhesion and tackiness.
It is also a low dispersion, low leakage grease.
Type GLG2 (Manufactured by NSK Ltd.)It produces little dust and has excellent wear resistance and rust resistance properties.

Maintenance

The grease forms an oil film on the steel balls and on the slideways of the linear guide, reducing friction.

Loss and deterioration of the grease will greatly affect the service life of the linear guide, so it must be lubricated on time depending on the conditions of use.

MISUMI linear guides are lubricated with standard grease at the time of shipment, so they can be used as is.

Recommended lubrication intervals

Lubricate every 6 months. If linear guide is used for long distances, it is recommended to lubricate every 3 months, or if it is used more than 1000 km in a period, we recommend every 1000 km.

*The above is the distance-based lubrication interval. If the grease deteriorates or is heavily contaminated due to the operating environment, it may be necessary to shorten the lubrication interval.

By using a lubrication unit, it is possible to extend the lubrication interval considerably.

MX Lubrication Units

Features

Long-term Maintenance-Free Condition

The special polyurethane in MX Lubrication Unit impregnates grease, and its micropore structure provides an optimal amount of grease on the raceway surface. A constant oil film is formed between steel balls and the raceway, enabling long-term maintenance-free operation.

Cost Benefit

Extended lubrication intervals result in reduce maintenance cost.

Short Lead Time

Ship time is the same as that of standard products.

Structure

Special polyurethane (yellow color) has interconnected micropores and has excellent water-holding capacity. This allows the unit to hold more grease.

Test Results

The linear guides with MX lubrication unit achieved 2,000 km of travel, more than the standard units without grease

Test conditions

SampleSXR24
Load2.87 kN
Travel speed750 mm/sec

- No grease: degreased linear guide

- No grease + MX: degreased linear guide equipped with MX only MX is filled with Alvania Grease S2 by Showa Shell Sekiyu K.K.

[!] Test results are for reference only and are not guaranteed

Permissible loads

HBasic Load RatingAllowable Static MomentMass
C (Dynamic)
kN
Co (Static)
kN
MA
N・m
MB
N・m
MC
N・m
Block
kg
Guide Rails
kg/m
81.62.47.57.59.00.0160.19
102.23.712.312.313.00.030.31
133.55.324.526.432.30.060.61
165.88.757.862.667.60.11.02
207.213.580.780.7138.20.181.65

kgf = N ・ 0.101972

kgf = kilograms force, N = Newton

Support Information

Shelf Life Information

For more information about the calculation of useful life, click here.

Mounting Hole Information

For more information about mounting holes and G-value, click here.

Installation Information

For more information about the installation click here.

Cautions

If the linear guides are handled incorrectly, the quality may deteriorate. When using MISUMI linear guides, consider the following points:

Be careful when removing the blocks

MISUMI linear guidesare equipped with a retainer, so that the balls will not fall out even if the block is removed from the rail. However, if the block is removed from the rail at high speed or inserted at an angle, the balls may fall out. Be careful when removing and installing the blocks.

Blocks and rails not sold separately

Linear guides MISUMI are only sold as a block and rail assembly. For resin retainer type only, blocks and rails can be purchased separately.

Please do not replace with another product

The radial clearance and accuracy of MISUMI linear guides are guaranteed as a block and rail assembly, so the accuracy is not guaranteed when combined with another product.

Please check the reference surface before installation.

Linear guides have reference planes on both the rail and the block (the side with a straight groove is provided). When installing the linear guide, correctly align this reference surface with the mounting reference surface of the table and base and secure it. For more details, refer to"Installation" in "Support Information".

Please do not add rails

MISUMI linear guides are shipped with chamfered edges on the end of the rail. The use of additional rails is not covered under warranty.

Secure all rail mounting holes.

The rail curvature is corrected with all mounting holes clamped. Accuracy is guaranteed under these conditions.

Ways to Use

Installation Example

Conventional Type

Positioning on the basis of plate end face.

With Dowel Holes

Positioning using a dowel hole.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
SSEL2BN8-[100,​115,​130]
SSEL2BN8G-[100,​115,​130]
SSEL2BN8L-[100,​115,​130]
SSEL2BN10-[115,​135,​155,​175,​195,​215,​235,​255,​275]
SSEL2BN10G-[115,​135,​155,​175,​195,​215,​235,​255,​275]
SSEL2BN10L-[115,​135,​155,​175,​195,​215,​235,​255,​275]
SSEL2BN13-[120,​145,​170,​195,​220,​245,​270,​295,​320,​345,​370,​395,​420,​445,​470]
SSEL2BN13G-[120,​145,​170,​195,​220,​245,​270,​295,​320,​345,​370,​395,​420,​445,​470]
SSEL2BN13L-[120,​145,​170,​195,​220,​245,​270,​295,​320,​345,​370,​395,​420,​445,​470]
SSEL2BN16-[150,​190,​230,​270,​310,​350,​390,​430,​470,​510,​550,​590,​630,​670]
SSEL2BN16G-[150,​190,​230,​270,​310,​350,​390,​430,​470,​510,​550,​590,​630,​670]
SSEL2BN16L-[150,​190,​230,​270,​310,​350,​390,​430,​470,​510,​550,​590,​630,​670]
SSEL2BN20-[220,​280,​340,​400,​460,​520,​580,​640,​700]
SSEL2BN20G-[220,​280,​340,​400,​460,​520,​580,​640,​700]
SSEL2BN20L-[220,​280,​340,​400,​460,​520,​580,​640,​700]
SSEL2BNL8-[101-129/1]
SSEL2BNL8G-[101-129/1]
SSEL2BNL8L-[101-129/1]
SSEL2BNL10-[116-274/1]
SSEL2BNL10G-[116-274/1]
SSEL2BNL10L-[116-274/1]
SSEL2BNL13-[121-469/1]
SSEL2BNL13G-[121-469/1]
SSEL2BNL13L-[121-469/1]
SSEL2BNL16-[151-669/1]
SSEL2BNL16G-[151-669/1]
SSEL2BNL16L-[151-669/1]
SSEL2BNL20-[221-699/1]
SSEL2BNL20G-[221-699/1]
SSEL2BNL20L-[221-699/1]
SSELBN8-[40,​55,​70,​85,​100,​115,​130]
SSELBN8G-[40,​55,​70,​85,​100,​115,​130]
SSELBN8L-[40,​55,​70,​85,​100,​115,​130]
SSELBN10-[55,​75,​95,​115,​135,​155,​175,​195,​215,​235,​255,​275]
SSELBN10G-[55,​75,​95,​115,​135,​155,​175,​195,​215,​235,​255,​275]
SSELBN10L-[55,​75,​95,​115,​135,​155,​175,​195,​215,​235,​255,​275]
SSELBN13-[70,​95,​120,​145,​170,​195,​220,​245,​270,​295,​320,​345,​370,​395,​420,​445,​470]
SSELBN13G-[70,​95,​120,​145,​170,​195,​220,​245,​270,​295,​320,​345,​370,​395,​420,​445,​470]
SSELBN13L-[70,​95,​120,​145,​170,​195,​220,​245,​270,​295,​320,​345,​370,​395,​420,​445,​470]
SSELBN16-[110,​150,​190,​230,​270,​310,​350,​390,​430,​470,​510,​550,​590,​630,​670]
SSELBN16G-[110,​150,​190,​230,​270,​310,​350,​390,​430,​470,​510,​550,​590,​630,​670]
SSELBN16L-[110,​150,​190,​230,​270,​310,​350,​390,​430,​470,​510,​550,​590,​630,​670]
SSELBN20-[160,​220,​280,​340,​400,​460,​520,​580,​640,​700]
SSELBN20G-[160,​220,​280,​340,​400,​460,​520,​580,​640,​700]
SSELBN20L-[160,​220,​280,​340,​400,​460,​520,​580,​640,​700]
SSELBN-MX10-[55,​75,​95,​115,​135,​155,​175,​195,​215,​235,​255,​275]
SSELBN-MX13-[70,​95,​120,​145,​170,​195,​220,​245,​270,​295,​320,​345,​370,​395,​420,​445,​470]
SSELBN-MX16-[110,​150,​190,​230,​270,​310,​350,​390,​430,​470,​510,​550,​590,​630,​670]
SSELBN-MX20-[160,​220,​280,​340,​400,​460,​520,​580,​640,​700]
SSELBNL8-[41-129/1]
SSELBNL8G-[41-129/1]
SSELBNL8L-[41-129/1]
SSELBNL10-[56-274/1]
SSELBNL10G-[56-274/1]
SSELBNL10L-[56-274/1]
SSELBNL13-[71-469/1]
SSELBNL13G-[71-469/1]
SSELBNL13L-[71-469/1]
SSELBNL16-[111-669/1]
SSELBNL16G-[111-669/1]
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSRail Width W1
(mm)
Unit Height H
(mm)
No. of Blocks Rail Length L
(mm)
Nominal Part Number Basic Load Rating: Dynamic Load
(N)
Basic Load Rating: Static Load
(N)
Allowable Static Moment MA
(N⋅m)
Allowable Static Moment MB
(N⋅m)
Allowable Static Moment MC
(N⋅m)
Lubrication Type L Dimension Type
1 Piece(s)

12 Days or more

10782100 ~ 1307160024007.57.59Lithium Base Grease (Standard)Standard Type
1 Piece(s)

12 Days or more

10782100 ~ 1307160024007.57.59Special Grease (Clean Room) - G TypeStandard Type
1 Piece(s)

12 Days or more

10782100 ~ 1307160024007.57.59Special Grease (Heat Resistant) - L TypeStandard Type
1 Piece(s)

12 Days or more

109102115 ~ 27592200370012.312.313Lithium Base Grease (Standard)Standard Type
1 Piece(s)

12 Days or more

109102115 ~ 27592200370012.312.313Special Grease (Clean Room) - G TypeStandard Type
1 Piece(s)

12 Days or more

109102115 ~ 27592200370012.312.313Special Grease (Heat Resistant) - L TypeStandard Type
1 Piece(s)

12 Days or more

1012132120 ~ 470123500530024.526.432.3Lithium Base Grease (Standard)Standard Type
1 Piece(s)

12 Days or more

1012132120 ~ 470123500530024.526.432.3Special Grease (Clean Room) - G TypeStandard Type
1 Piece(s)

12 Days or more

1012132120 ~ 470123500530024.526.432.3Special Grease (Heat Resistant) - L TypeStandard Type
1 Piece(s)

12 Days or more

1015162150 ~ 670155800870057.862.667.6Lithium Base Grease (Standard)Standard Type
1 Piece(s)

12 Days or more

1015162150 ~ 670155800870057.862.667.6Special Grease (Clean Room) - G TypeStandard Type
1 Piece(s)

12 Days or more

1015162150 ~ 670155800870057.862.667.6Special Grease (Heat Resistant) - L TypeStandard Type
1 Piece(s)

12 Days or more

1020202220 ~ 7002072001350080.780.7138.2Lithium Base Grease (Standard)Standard Type
1 Piece(s)

12 Days or more

1020202220 ~ 7002072001350080.780.7138.2Special Grease (Clean Room) - G TypeStandard Type
1 Piece(s)

12 Days or more

1020202220 ~ 7002072001350080.780.7138.2Special Grease (Heat Resistant) - L TypeStandard Type
1 Piece(s)

12 Days or more

10782101 ~ 1297160024007.57.59Lithium Base Grease (Standard)Configurable Type
1 Piece(s)

12 Days or more

10782101 ~ 1297160024007.57.59Special Grease (Clean Room) - G TypeConfigurable Type
1 Piece(s)

12 Days or more

10782101 ~ 1297160024007.57.59Special Grease (Heat Resistant) - L TypeConfigurable Type
1 Piece(s)

12 Days or more

109102116 ~ 27492200370012.312.313Lithium Base Grease (Standard)Configurable Type
1 Piece(s)

12 Days or more

109102116 ~ 27492200370012.312.313Special Grease (Clean Room) - G TypeConfigurable Type
1 Piece(s)

12 Days or more

109102116 ~ 27492200370012.312.313Special Grease (Heat Resistant) - L TypeConfigurable Type
1 Piece(s)

12 Days or more

1012132121 ~ 469123500530024.526.432.3Lithium Base Grease (Standard)Configurable Type
1 Piece(s)

12 Days or more

1012132121 ~ 469123500530024.526.432.3Special Grease (Clean Room) - G TypeConfigurable Type
1 Piece(s)

12 Days or more

1012132121 ~ 469123500530024.526.432.3Special Grease (Heat Resistant) - L TypeConfigurable Type
1 Piece(s)

12 Days or more

1015162151 ~ 669155800870057.862.667.6Lithium Base Grease (Standard)Configurable Type
1 Piece(s)

12 Days or more

1015162151 ~ 669155800870057.862.667.6Special Grease (Clean Room) - G TypeConfigurable Type
1 Piece(s)

12 Days or more

1015162151 ~ 669155800870057.862.667.6Special Grease (Heat Resistant) - L TypeConfigurable Type
1 Piece(s)

12 Days or more

1020202221 ~ 6992072001350080.780.7138.2Lithium Base Grease (Standard)Configurable Type
1 Piece(s)

12 Days or more

1020202221 ~ 6992072001350080.780.7138.2Special Grease (Clean Room) - G TypeConfigurable Type
1 Piece(s)

12 Days or more

1020202221 ~ 6992072001350080.780.7138.2Special Grease (Heat Resistant) - L TypeConfigurable Type
1 Piece(s)

12 Days or more

1078140 ~ 1307160024007.57.59Lithium Base Grease (Standard)Standard Type
1 Piece(s)

12 Days or more

1078140 ~ 1307160024007.57.59Special Grease (Clean Room) - G TypeStandard Type
1 Piece(s)

12 Days or more

1078140 ~ 1307160024007.57.59Special Grease (Heat Resistant) - L TypeStandard Type
1 Piece(s)

12 Days or more

10910155 ~ 27592200370012.312.313Lithium Base Grease (Standard)Standard Type
1 Piece(s)

12 Days or more

10910155 ~ 27592200370012.312.313Special Grease (Clean Room) - G TypeStandard Type
1 Piece(s)

12 Days or more

10910155 ~ 27592200370012.312.313Special Grease (Heat Resistant) - L TypeStandard Type
1 Piece(s)

12 Days or more

101213170 ~ 470123500530024.526.432.3Lithium Base Grease (Standard)Standard Type
1 Piece(s)

12 Days or more

101213170 ~ 470123500530024.526.432.3Special Grease (Clean Room) - G TypeStandard Type
1 Piece(s)

12 Days or more

101213170 ~ 470123500530024.526.432.3Special Grease (Heat Resistant) - L TypeStandard Type
1 Piece(s)

12 Days or more

1015161110 ~ 670155800870057.862.667.6Lithium Base Grease (Standard)Standard Type
1 Piece(s)

12 Days or more

1015161110 ~ 670155800870057.862.667.6Special Grease (Clean Room) - G TypeStandard Type
1 Piece(s)

12 Days or more

1015161110 ~ 670155800870057.862.667.6Special Grease (Heat Resistant) - L TypeStandard Type
1 Piece(s)

12 Days or more

1020201160 ~ 7002072001350080.780.7138.2Lithium Base Grease (Standard)Standard Type
1 Piece(s)

12 Days or more

1020201160 ~ 7002072001350080.780.7138.2Special Grease (Clean Room) - G TypeStandard Type
1 Piece(s)

12 Days or more

1020201160 ~ 7002072001350080.780.7138.2Special Grease (Heat Resistant) - L TypeStandard Type
1 Piece(s)

12 Days or more

10910155 ~ 27592200370012.312.313Self-LubricatedStandard Type
1 Piece(s)

12 Days or more

101213170 ~ 470123500530024.526.432.3Self-LubricatedStandard Type
1 Piece(s)

12 Days or more

1015161110 ~ 670155800870057.862.667.6Self-LubricatedStandard Type
1 Piece(s)

12 Days or more

1020201160 ~ 7002072001350080.780.7138.2Self-LubricatedStandard Type
1 Piece(s)

12 Days or more

1078141 ~ 1297160024007.57.59Lithium Base Grease (Standard)Configurable Type
1 Piece(s)

12 Days or more

1078141 ~ 1297160024007.57.59Special Grease (Clean Room) - G TypeConfigurable Type
1 Piece(s)

12 Days or more

1078141 ~ 1297160024007.57.59Special Grease (Heat Resistant) - L TypeConfigurable Type
1 Piece(s)

12 Days or more

10910156 ~ 27492200370012.312.313Lithium Base Grease (Standard)Configurable Type
1 Piece(s)

12 Days or more

10910156 ~ 27492200370012.312.313Special Grease (Clean Room) - G TypeConfigurable Type
1 Piece(s)

12 Days or more

10910156 ~ 27492200370012.312.313Special Grease (Heat Resistant) - L TypeConfigurable Type
1 Piece(s)

12 Days or more

101213171 ~ 469123500530024.526.432.3Lithium Base Grease (Standard)Configurable Type
1 Piece(s)

12 Days or more

101213171 ~ 469123500530024.526.432.3Special Grease (Clean Room) - G TypeConfigurable Type
1 Piece(s)

12 Days or more

101213171 ~ 469123500530024.526.432.3Special Grease (Heat Resistant) - L TypeConfigurable Type
1 Piece(s)

12 Days or more

1015161111 ~ 669155800870057.862.667.6Lithium Base Grease (Standard)Configurable Type
1 Piece(s)

12 Days or more

1015161111 ~ 669155800870057.862.667.6Special Grease (Clean Room) - G TypeConfigurable Type

Loading...

Example

Miniature Linear Guides - Long Block with Dowel Holes:Related Image
 

Basic Information

Set / Single Item Set Block Type Long Block-Dowel Hole Rail Type Standard
Material Stainless Steel Preload Light Preload Accuracy High Grade
Ball Arrangement Miniature Type Retainer N/A Rolling Element Ball

Frequently asked questions (FAQ)

質問: Are the block's ball bearings retained?
回答: Yes, all ball bearings are retained on Misumi linear guides.
質問: What is the seal material of you miniature linear guides?
回答: Nitrile Rubber (NBR).

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.