(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Straight Ejector Sleeves & One-Step Center Pin Sets -SKH51/L Dimension Designation Type- (Part Numbers)

Straight Ejector Sleeves & One-Step Center Pin Sets -SKH51/L Dimension Designation Type-

Click this image to zoom it.

Move the mouse over the image to zoom

•Product Composition: Center pin sets
•Inner dia. Tolerance: +0.005/0
•Material: SKH51
•Head Thickness: 4mm(T4)
•Shaft Diameter Tolerance: 0/-0.005

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSD/P (Shaft diameter)
(mm)
V (Hole diameter)
(mm)
Center pin tip shape L (L dimension)
(mm)
A (Center pin tip diameter)
(mm)
C (Recess diameter)
(mm)
E (Center pin tip diameter)
(mm)
F (Center pin shaft diameter length)
(mm)
R
(mm)
S (V hole diameter length)
(mm)
X (Full length of the center pin)
(mm)

Loading...

  1. 1
 

Basic Information

Product composition Center pin sets Material SKH51 Surface treatment No
Head thickness 4mm(T4) Shaft diameter tolerance 0/-0.005 Concentricity between the hole and shaft diameters ◎0.005
Inner dia. tolerance +0.005/0 Tapered or not No

Additional Products in this Category

Complementary Products

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.