Suruga Seiki Filter Holders

• 

  Flat spring type filter holder

  Suruga Seiki

  [Features]
  · Holder to fix a square or round filter.
  · Up to four filters of external diameter of φ 50 mm square can be set.
  · Push in the filter from above and then it is pushed against the reference surface by the flat spring and fixed.
  · Thanks to it, even if the filter is attached and detached, the inclination of the filter against the optical axis is kept constant at any times, so the optical axis will not be misaligned significantly.
  · In addition, filters will not contact each other.
  · The filter contact part of the flat spring is made of resin.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	13 Days or more

• 

  Filer Holder - F72-1

  Suruga Seiki

  [Features]
  · Holder to set a round or square filter.
  · Up to four filters of external diameter of φ 50 mm square can be set.
  · The filter shall be inserted from above, but it is not fixed so it may incline due to thickness.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Filer Holder - F561

  Suruga Seiki

  [Features]
  · Holder to set a φ 15 mm or φ 20 mm filter
  · Maintains the optical axis height at 25 mm from the floor.
  · Can set two filters.
  · By loosening the clamp, you can slide the wheel back and forth and fix it in accordance with the thickness of the filter.
  · The compatible thickness of the filter is up to 4 mm.
  · The lower plate has a M4 tap hole and the rod type can be changed by attaching a rod.
  · F561-20 can be used as a simple change element holder by directly turning the element.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

Loading...