Suruga Seiki Fixed Holders & Holder Accessories

• 

  Screw Ring

  Suruga Seiki

  This is a screw ring for fastening lenses and mirrors. Note that even if the diameter is the same, the shape may vary according to the product. *The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Alignment target

  Suruga Seiki

  Used for constructing optical systems.　
  
  [Features]
  · Used to adjust the optical axis when mounting an optical system of opt station.
  · Can be fixed into a tap hole of a blade board by pushing the large pin to fix the target downward.
  · You can install it in any position by returning the pin upward.
  · The mark of the target is adjusted to 45 mm high.
  · Seals for target (white-based black cross and black-based white cross) are included.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	13 Days or more

• 

  Camera Holder - F119 Series

  Suruga Seiki

  This is a camera holder to fix the camera, CCD camera, video camera etc. *The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Power meter holder

  Suruga Seiki

  [Features]
  · Holder to fix a commercially available power meter sensor.
  · This is mainly used for fix a rectangle power meter sensor and has a structure in which the sensor is not misaligned even if the sensor cable is pulled.
  · The fixing method is to sandwich with screws from above.
  · Sensors which can be fixed are limited.
  · With the rod removed, direct mounting to the base is possible.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Rod with Plate

  Suruga Seiki

  [Features]
  · 40mm stage, opts station use holder etc. can be mounted.
  · Cross clamp etc. can mount freely in position.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

• 

  Ring Spanner - A92 Series

  Suruga Seiki

  This is a ring spanner for tightening screw rings. Fixed and variable types are available. Sizes are available matching with ring diameter. *The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	13 Days or more

• 

  Half-fixed holder

  Suruga Seiki

  [Features]
  · The mounting positions of adapter plates can be adjusted with the YZ shaft.
  · The mounting position is fixed with screws, so it does not move after fixing.
  · The adapter plate is fixed at two lower points and there is no shielding object above, so work from above is easy.
  · Please use this when no change is made after adjustment such as optical axis adjustment of a lens

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	13 Days or more

• 

  Fixed-type Holder

  Suruga Seiki

  Various types of adapters can be fixed with the help of this holder. The optical axis height is unified to 25 mm from the floor. *The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Resin ring

  Suruga Seiki

  [Features]
  · This product is used to fix a lens and mirror to the holder of the manufacturer.
  · Note that this product is dedicated to the holder of the manufacturer.
  · Note that even if the diameter is the same, the shape varies according to the product.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Adapter Mounting Bracket

  Suruga Seiki

  Bracket that can be fitted with various adapter types. Can be mounted to tilt stage. *The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  • Volume Discount

  Days to Ship:	26 Days or more

Loading...