While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

igus Plain & Self-Lubricating Bearings（Environment：In Oil）

Type

Straight
Shouldered
Flanged
Pillow Block
Open Type

5 items

: 30; 45; 60

Oil Free Bushings - With shoulder, iglidur® X.

igus

Oil-free shoulder bushing with excellent resistance to high temperatures and chemicals. Excellent wear resistance and maintenance-free. Heat resistant during continuous operation -100 to +250°C (+315°C short term). Wide range of chemical resistance. High compressive strength. Low moisture absorption. Excellent wear resistance over the entire temperature range. Ideal for surface pressures up to 150 MPa.

Volume Discount

CAD ：

2D
Days to Ship: 8 Days or more
Oil Free Bushings - Straight, iglidur® G.

igus

A straight oil-free bushing that can be used with shafts of any material, for linear or rotary applications. Operating temperature from -40°C to +130°C. Economical bushing suitable for a wide range of applications. Maintenance-free, no lubrication or greasing required. Excellent vibration damping properties. High abrasion and dust resistance. For medium and higher loads. For low to medium speeds. For rotary and oscillating movements.

Volume Discount

CAD ：

2D
Days to Ship: 8 Days or more
Oil Free Bushings - With shoulder, iglidur® G.

igus

An oil-free shoulder bushing that can be used with shafts of any material, for linear or rotary applications. Operating temperature from -40°C to +130°C. Economical bushing suitable for a wide range of applications. Maintenance-free, no lubrication or greasing required. Excellent vibration damping properties. High abrasion and dust resistance. For medium and higher loads. For low to medium speeds. For rotary and oscillating movements.

Volume Discount

CAD ：

2D
Days to Ship: 7 Days or more
Oil Free Bushings - Straight, iglidur® J.

igus

Straight oil-free bushing suitable for high-speed applications, where the risk of stick-slip effect is reduced. Non-lubricated and maintenance-free bushing. Operating temperature from -50°C to +90°C. Low coefficient of friction in non-lubricated operation. Excellent vibration damping properties. Good chemical resistance. Ideal for shaft materials with low hardness. Low moisture absorption rate. Suitable for low and medium loads.

Volume Discount

CAD ：

2D
Days to Ship: 8 Days or more
Oil Free Bushings - With shoulder, iglidur® J.

igus

Oil-free shoulder bushing suitable for high-speed applications, where the risk of stick-slip effect is reduced. Non-lubricated and maintenance-free bushing. Operating temperature from -50°C to +90°C. Low coefficient of friction in non-lubricated operation. Excellent vibration damping properties. Good chemical resistance. Ideal for shaft materials with low hardness. Low moisture absorption rate. Suitable for low and medium loads.

Volume Discount

CAD ：

2D
Days to Ship: 8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	7 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more


Brand
Product Series
CAD
Days to Ship
Type
Metallic
Bushing Material
I.D. d(mm)
I.D. d(inch)
O.D. D(mm)
O.D. D(inch)
Overall Length L(mm)
Overall Length L(inch)
Maximum Allowable PV Value Range(N/mm²•m/s)
Maximum Allowable PV Value(N/mm²•m/s)
Max. Allowable Surface Pressure P(N/mm²)
Max. Allowable Velocity V(m/s)
Housing Style
Housing Material
Length Type
Mounting Shaft Fits
Mounting Hole Fits
Thickness T(mm)
Lubrication Condition
Environment


Brand	igus	igus	igus	igus	igus
Product Series	Oil Free Bushings - With shoulder, iglidur® X.	Oil Free Bushings - Straight, iglidur® G.	Oil Free Bushings - With shoulder, iglidur® G.	Oil Free Bushings - Straight, iglidur® J.	Oil Free Bushings - With shoulder, iglidur® J.
CAD	2D	2D	2D	2D	2D
Days to Ship	8 Days or more	8 Days or more	7 Days or more	8 Days or more	8 Days or more
Type	Shouldered	Straight	Shouldered	Straight	Shouldered
Metallic	-	-	-	-	-
Bushing Material	-	-	-	-	-
I.D. d(mm)	2 ～ 60	1.5 ～ 75	3 ～ 100	2 ～ 25	3 ～ 55
I.D. d(inch)	-	-	-	-	-
O.D. D(mm)	4 ～ 65	3 ～ 80	4.5 ～ 105	3.5 ～ 28	4.5 ～ 60
O.D. D(inch)	-	-	-	-	-
Overall Length L(mm)	3 ～ 40	2 ～ 60	2 ～ 50	2.5 ～ 30	3 ～ 50
Overall Length L(inch)	-	-	-	-	-
Maximum Allowable PV Value Range(N/mm²•m/s)	1.1 to 2.0	0.3 to 1.0	0.3 to 1.0	0.3 to 1.0	0.3 to 1.0
Maximum Allowable PV Value(N/mm²•m/s)	1.32	0.42	0.42	0.34	0.34
Max. Allowable Surface Pressure P(N/mm²)	150	80	80	35	35
Max. Allowable Velocity V(m/s)	1.5	1	1	1.5	1.5
Housing Style	-	-	-	-	-
Housing Material	-	-	-	-	-
Length Type	-	-	-	-	-
Mounting Shaft Fits	h9	h9	h9	h9	h9
Mounting Hole Fits	H7	H7	H7	H7	H7
Thickness T(mm)	-	-	-	-	-
Lubrication Condition	Unlubricated	Unlubricated	Unlubricated	Unlubricated	Unlubricated
Environment	In Oil	In Oil	In Oil	In Oil	In Oil

Configure

Specification/Dimensions

Metallic
- Brass
Clear

Bushing Material
- Graphite Impregnated Brass
- Bronze
- Cast Iron
- Polyacetal
- PTFE
- Fluororesin
- Iglide J®
- DryLin® R
- Sintered Bronze with PTFE
- Frelon Gold®
Clear

Metric / Inch
- metric
Clear

I.D. d(mm)
1.5

2

2.5

03

3

04

4

4.5

05

5

06

6

7

8

08

9

10

11

12

13

14

15

16

17

18

19

20

21

22

24

25

26

27

28

30

31

31.5

32

35

36

38

40

42

45

50

52

55

60

63

65

70

75

80

85

90

100

110

120

130

140

150

160

170
Drawing

Clear

I.D. d(inch)
0.13 in (1/8")

0.19 in (3/16")

0.25 in (1/4")

0.38 in (3/8")

0.50 in (1/2")

0.63 in (5/8")

0.75 in (3/4")

1.00 in (1")

1.25 in (1-1/4")

1.50 in (1-1/2")

2.00 in (2")

2.50 in (2-1/2")

3.00 in (3")

4.00 in (4")
Clear

O.D. D(mm)
3

3.5

4

4.5

4.6

5

05

5.5

5.6

06

6

7

08

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

42

43.0

44

45

47

48

50

52

53.0

55

56

57

60

62

65

70

74

75

80

85

90

95

96

100

105

110

115

120

125

130

135

140

145

150

155

160

165

170

180

190

210
Drawing

Clear

O.D. D(inch)
0.13 in (1/8")

0.19 in (3/16")

0.25 in (1/4")

0.31 in (5/16")

0.38 in (3/8")

0.50 in (1/2")

0.63 in (5/8")

0.69 in (11/16")

0.75 in (3/4")

0.81 in (13/16")

0.88 in (7/8")

0.94 in (15/16")

1.00 in (1")

1.13 in (1-1/8")

1.25 in (1-1/4")

1.50 in (1-1/2")

1.56 in (1-9/16")

1.75 in (1-3/4")

1.81 in (1-13/16")

2.00 in (2")

2.38 in (2-3/8")

3.00 in (3")

3.75 in (3-3/4")

4.50 in (4-1/2")

6.00 in (6")
Clear

Overall Length L(mm)
2

02

2.4

2.5

2.6

2.7

2.8

3

03

3.5

3.8

4

04

4.4

4.5

4.8

05

5

5.5

5.9

06

6

6.5

7

7.5

08

8

9

9.5

10

10.5

11

11.5

12

12.5

13

13.5

14

15

15.5

16

16.5

17

17.5

18

19

20

21

21.5

22

23

24

25

26

27

28

29

30

31.5

32

34

35

36

37

38

39

40

42

42.5

45

47

48

50

51

52

55

56

57

58

59

60

62

63

64

65

67

67.5

68

69

70

73

74

75

76

77

78

80

81

82

85

86

90

95

97

100

103

108

110

112

115

120

125

128

140

141

150

158

170

175

188

200

240
Drawing

Clear

Overall Length L(inch)
0.25 in (1/4")

0.31 in (5/16")

0.38 in (3/8")

0.50 in (1/2")

0.56 in (9/16")

0.63 in (5/8")

0.75 in (3/4")

0.84 in (27/32")

0.88 in (7/8")

1.00 in (1")

1.03 in (1-1/32")

1.25 in (1-1/4")

1.33 in (1-5/16")

1.50 in (1-1/2")

1.63 in (1-5/8")

1.75 in (1-3/4")

1.78 in (1-25/32")

2.19 in (2-3/16")

2.25 in (2-1/4")

2.38 in (2-3/8")

2.50 in (2-1/2")

2.63 in (2-5/8")

2.81 in (2-13/16")

2.95 in (2-61/64")

2.98 in (2-63/64")

3.00 in (3")

3.09 in (3-3/32")

3.25 in (3-1/4")

4.00 in (4")

4.13 in (4-1/8")

4.50 in (4-1/2")

5.00 in (5")

6.00 in (6")

8.00 in (8")
Clear

Maximum Allowable PV Value Range(N/mm²•m/s)
- 0.3 to 1.0
- 1.1 to 2.0
- 2.1 to 5.0
Clear

Maximum Allowable PV Value(N/mm²•m/s)
0.34

0.36

0.42

0.5

0.65

0.72

0.83

0.98

1

1.25

1.32

1.63

1.65

1.65～3.25

1.72

2.45

3.25

3.6

20000
The value varies depending on the lubrication conditions. Please check the value provided by the manufacturer.
Clear

Max. Allowable Surface Pressure P(N/mm²)
5

6

7

10

10.35

14.5

17.5

20.7

24.5

29

35

49

80

137

150

3000
The value varies depending on the lubrication conditions. Please check the value provided by the manufacturer.
Clear

Max. Allowable Velocity V(m/s)
0.15

0.4

0.5

0.5～1.0

0.65

0.71

0.85

1

1.15

1.5

1.65

1.66

1.83

2.5

3.33

300

1969
The value varies depending on the lubrication conditions. Please check the value provided by the manufacturer.
Clear

Housing Style
- Round Flanged
- Square Flanged
- Oval Shape Flanged
- Pilot Flanged
- Center Flanged
- Pillow Type
Clear

Housing Material
- Steel
- Aluminum
Clear

Length Type
- Single
- Double
- Long
Clear

Mounting Shaft Fits
- e7
- g6
- h6
- h7
- h9
Clear

Mounting Hole Fits
- G7
- H6
- H7
- M7
Clear

Thickness T(mm)
0.8

1

1.5

2

2.47

2.5

3

4

5
Drawing

Clear

Lubrication Condition
- Unlubricated
- Regular Lubrication
Clear

Environment
- Standard
- Heat Resistant
- Foreign Object Resistant
- Vibration Resistant
- In Oil
- In Water
- In Seawater
- In Chemical
- Food
Clear

Narrow search by specifying Manufacturer

- MISUMI (0)
- C-Value ()
- igus (5)
- Oiles (5)
- Daido Metal (2)
- NTN (2)
- PBC Linear (0)
Clear

CAD

- 2D
- 3D
Clear

Days to Ship

All

Same day

5 Days or Less

6 Days or Less

7 Days or Less

8 Days or Less

9 Days or Less

10 Days or Less

11 Days or Less

12 Days or Less

13 Days or Less
Clear