Nylon Connectors（Page2）

• 

  Spring Type Connector, 733 Series, 2.5 mm Pitch, Male

  WAGO

  The female side can be connected to 733-100 series connectors with the male side of a mini type spring connector. Maximum wire size is 0.5 mm2. The connectors may also be used to connect to sensor wires, etc.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Spring Type Connector, 734 Series, 3.5 mm Pitch, Male

  WAGO

  The female side can be connected to 734-100 series connectors along with the male side of the mini type spring connector. MAX wire size is 1.5 mm2

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Spring Type Connector, Mismatch Prevention Type, 721 Series, 5 mm Pitch, Female

  WAGO

  Male side can be connected to 721-600 series connectors with the female side of a spring type connector, and the corresponding circuit board can be connected to 5 mm pitch 721-100 series/400 series connectors.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  CC-Link On-line Connector

  MISUMI

  I/O devices can be replaced with maintaining the signal line loop

  • Volume Discount

  • CC-Link
  • Gold Plated
  • Lever Lock

  Days to Ship:	8 Days or more

• 

  PH Connector Pin Header (Vertical Mounting)【50 Pieces Per Package】

  MISUMI

  Misumi (JST) make. For 2.0 mm pitch vertical mounting with a built-in male contact. 1 package contains 50 pieces

  • Volume Discount

  • UL
  • CSA
  • TUV
  • For Power Supply
  • For Signal
  • Sensor
  • Motor
  • Insertion

  Days to Ship:	8 Days or more

• 

  COMBICON Socket Header (Horizontal)

  MISUMI

  Phoenix contact make. Header for horizontal mounting with built-in male contact

  • Volume Discount

  • UL
  • CSA
  • For Signal
  • Sensor
  • DeviceNet
  • Tin-Plated
  • Gold Plated
  • One-Touch Lock
  • 300 V

  CAD ：

  2D

  Days to Ship:	6 Days or more

• 

  Commercial MATE-N-LOK Socket Housing【20 Pieces Per Package】

  MISUMI

  Manufactured by Tyco Electronics AMP (presently: TE). Vibration resistant housing thanks to a locking mechanism for after binding. 1 pack contains 20 pieces.

  • Volume Discount

  • UL
  • CSA
  • For Power Supply
  • For Signal
  • Sensor
  • Caulking
  • Insertion

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  EI Connector Socket Housing【50 Pieces Per Package】

  MISUMI

  Manufactured by Tyco Electronics AMP (presently: TE). Housing with prevention mechanism against fitting errors and pitch shift. 1 package contains 50 pieces.

  • Volume Discount

  • UL
  • CSA
  • TUV
  • For Power Supply
  • For Signal
  • Sensor
  • Motor
  • Caulking
  • Insertion

  CAD ：

  2D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  NH Connector Socket Housing【50 Pieces Per Package】

  MISUMI

  Manufactured by JST. 2.5 mm Pitch Model, Height 15 mm / Thickness 6.4 mm. 1 package contains 50 pieces.

  • Volume Discount

  • UL
  • CSA
  • TUV
  • For Power Supply
  • For Signal
  • Sensor
  • Motor
  • Insertion

  CAD ：

  2D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  1625 Connector Socket Housing【50 Pieces Per Package】

  MISUMI

  Manufactured by Molex. The locking mechanism helps prevent displacement caused by vibration. 1 package contains 50 pieces.

  • Volume Discount

  • UL
  • CSA
  • Insertion

  Days to Ship:	8 Days or more

• 

  5559/5557 Connector Socket Housing【50 Pieces Per Package】

  MISUMI

  Lineup of 2 models of flame retardant grade models

  • Volume Discount

  • UL
  • CSA
  • For Power Supply
  • For Signal
  • Sensor
  • Motor
  • Insertion

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  EL Connector Socket Housing【50 Pieces Per Package】

  MISUMI

  Manufactured by JST. The section holding the contact is long and has a wrenched insertion rate for when the fitting is reduced. 1 package contains 50 pieces/

  • Volume Discount

  • UL
  • CSA
  • TUV
  • Insertion

  CAD ：

  2D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  SM Connector Socket Housing【50 Pieces Per Package】

  MISUMI

  Manufactured by JST. Characterized by high reliability thanks to a locking mechanism in the complete loading design. 1 package contains 50 pieces.

  • Volume Discount

  • UL
  • CSA
  • TUV
  • For Power Supply
  • For Signal
  • Sensor
  • Motor
  • Insertion

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  CB01 Waterproof Connector Socket Housing【10 Pieces Per Package】

  MISUMI

  Manufactured by Sumiko Tec. Demonstrates great waterproof properties with built-in packing.

  • Volume Discount

  • IP64
  • Relay
  • For Signal
  • Outdoor Wiring
  • Caulking
  • Lever Lock

  Days to Ship:	8 Days or more

• 

  e-CON Plug Connector【8-100 Pieces Per Package】

  MISUMI

  Manufactured by Sumimoto and Tyco Electronics AMP (presently: TE). Wiring work is made easy since the need to strip wires is eliminated
  
  e-Con connectors make wiring work easy since the need to strip wires is eliminated. These connectors are designed to accommodate typical wiring specifications per Japanese and Asian suppliers. These connectors reduce maintenance work by providing higher connection reliability. The mating latches help provide a reliable interconnection in demanding applications. Wiring can be carried out easily with either the dedicated Misumi original tools, or commercially available pliers. (Misumi original tools are recommended for 6- or 8-core wires.
  
  [Features]
  •No need to strip wire coating
  •Compatible wire types are identified with 8 different color coded connector covers
  •Simple maintenance due to integrated main unit and cover
  •Multiple wire size diameters
  •Quick and easy termination
  •Wire Connection Method: Pressure Welding
  •High number of mating cycles Treatment
  •Contact Material: Copper alloy
  •Finish: UL94V-0 Black, Blue, or Green
  •Available from Misumi as a pack, this product has an original Misumi model number
  •Manufacturer: 3-Core, 4-Core: 3M / 6-Core, 8-Core: Tyco Electronics

  • Volume Discount

  • For Signal
  • Connection in Boards
  • Sensor
  • Pressure Welding
  • No Need of Dedicated Tools
  • Gold Plated
  • One-Touch Lock

  CAD ：

  2D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  e-CON Branch Adapter【20 Pieces Per Package】

  MISUMI

  Manufactured by Sumimoto and Tyco Electronics AMP (presently: TE). Branch adapter that lines up 2 branch / 3 branch

  • Volume Discount

  • Insertion

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  COMBICON Plug Connector with Screw Flange

  MISUMI

  Manufactured by Phoenix Contact. Device Net standard connector for completely fixing screws.

  • Volume Discount

  • UL
  • CSA
  • For Signal
  • Sensor
  • DeviceNet
  • Screw Type
  • Tin-Plated
  • Gold Plated
  • Screw Lock
  • 300 V

  CAD ：

  2D

  Days to Ship:	6 Days or more

• 

  Easy-Lock Connector for Micro Switches【500 Pieces Per Package】

  Nichifu

  A highly safe, ‘light-touch’ product that utilizes the EASY LOCK connector mechanism.
  
  [Features]
  · Simultaneous multipole mounting
  · Three or four terminals are installed into a single housing, which can be simultaneously mounted to the switch tabs.
  · In addition, the mounting is very soft and smooth, which reduces the burden on the operator and greatly improves workability.
  · Prevents vibration/mounting errors.
  · A highly reliable safe connection is achieved by the new locking mechanism function that is created by making the terminals partly sprung.
  · This locking mechanism works and will not detach even if the wires are pulled strongly.
  · Naturally, this connector will not disconnect by impact caused by vibration, etc.
  · *Accidents caused by wiring errors when assembling equipment and conducting maintenance can also be prevented.
  · Removal is also simple.
  · The connector can be simply removed by sliding the housing (by holding the housing by hand and pulling) to release the locking mechanism.
  · In the same way when mounting the connector, the burden on the operator is reduced by the extremely light touch.

  • Volume Discount

  Days to Ship:	Same day

  Show Stock Products

• 

  Commercial Mate-N-Lok Connector

  TE Connectivity

  The entire nylon connector is small and lightweight while also being economical and able to increase equipment density.
  [Features]
  ·Nylon housing with plug polarity.
  ·The contact hole is easy to identify with a stable self-centering mechanism built in.
  ·The locking mechanism is completely built into the housing design.
  ·Keeps both halves of the connector securely in place during intense vibration and shock.
  ·Connector is small, lightweight and capable of increasing equipment density.
  [Applications]
  ·Household appliances, office equipment, automobiles and other vehicles.

  • Volume Discount

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Dynamic HTS Module

  TE Connectivity

  [Features]
  · The Dynamic Series of connectors have been developed heavy duty waterproofing applications.
  · All Dynamic Series connectors are mountable from the inside of control panels to the panel exterior.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	6 Days or more

• 

  NH Connector【50 Pieces Per Package】

  JST

  The post with base has three types: top, side and bottom. Electrical entry is possible in three directions: at right angles to the board (up or down) or parallel to the board.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  PA connector

  JST

  Strong lock-type connector that supports high-density mounting by reducing the area the circuit board occupies.

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  SM Connectors【1-1,000 Pieces Per Package】

  JST

  This small-type relay connector is equipped with a panel lock mechanism, and offers high reliability with a smaller size, more dense design, and the use of micro-currents.
  
  [Features]
  ・This small-type relay connector with 2.5-mm pitch offers high reliability with a smaller size, more dense design, and the use of micro-currents.
  ・High contact pressure, dual contact.
  · Shell type housing.
  ・Applicable to a wide range of panels.
  ▪ Arm lock mechanism.

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  XA Connector (for Relay Connections)【1-1,000 Pieces Per Package】

  JST

  A connector with 2.5-mm pitch and strong lock for combined use with relays and circuit boards.
  
  [Features]
  ・A 2.5-mm pitch relay connector compatible with preexisting XA sockets.
  ・In addition to being compatible with an extremely reliable retainer, this product can also be attached to panels.
  ・ Corresponds to preexisting XA sockets.
  ・Inner type contact lance.
  ・Compatible with Panel Mount.
  · A retainer.
  ・Strong Lock Mechanism.

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  ZH Connector

  JST

  A connector with a more compact (approximately 45%) and a lower-profile design than 2.0‑mm pitch connectors (comparison by manufacturer.)

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  2.5mm Board-in Connector Housing (51015)

  Molex

  [Features]
  · Molex wire mounted directly to the board (compatible with 51035 series housings (Applicable terminal: 50034).
  · Number of leads: 2 to 15 leads.
  •Low-profile type.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  C-Grid® III^TM Micro Shunt

  Molex

  This is a Molex shunt.
  •Applicable pin/contact: Female (socket)
  •Color: Black

  Days to Ship:	89 Days or more

• 

  MicroClasp® 2.0 mm Pitch Circuit Board Wafer (55932)

  Molex

  [Features]
  A space-saving Molex product that offers easier removal than other similar 2.00 mm (.079") and 2.50 mm (.098") pitch wire-to-circuit board connection systems. (Mating housing: 51382)

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  MicroClasp® 2.0 mm Pitch Circuit Board Housing (51353)

  Molex

  A space saving Molex product that offers easier removal than other similar 2.00 mm (.079") and 2.50 mm (.098") pitch wire-to-circuit board connection systems. (Mating wafers: 55917/55959 conforming terminal: 56134)

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  Micro-Fit 3.0 Connector (43640)

  Molex

  [Features]
  · Molex 3.00 mm pitch connector. Available in a variety of wire-to-wire, wire-to-board and board-to-board coupling configurations and number of pins. Maximum rated current: 5.0 A. Brand name compatible products are also available. (Compatible housing: 43645)

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  Mini-Lock^TM 2.50 mm Pitch Wire-to-Circuit Board Housing (51102)

  Molex

  Molex types are available in both straight and right angled types. Wire-to-wire optional parts are also available. This product has a high mating workability on the fitting guide wall. (Compatible terminal: 50351, mating wafers: 53375 / 53426)

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  MX150 Housing (33472)

  Molex

  [Features]
  · Molex compatible housing: 33482, compatible terminal: 33012

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  PicoBlade^TM 1.25 mm Pitch Circuit Board Housing (51047)

  Molex

  A number of wire-to-circuit board and wire-to-wire optional extra Molex products are available. There are variations in the headers of both types: Surface mount type and through-hole type. (Mating housing: 51021, compatible terminals: 50125/ 50133)

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  Mini-SPOX^TM Wire-to-Board Straight Connector (5267)

  Molex

  [Features]
  The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. Straight. (Mating housing: 5264)

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  SPOX^TM Wire-to-Board Header - 5081

  Molex

  [Features]
  The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. (Mating housing: 5197)

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  SPOX™ Housing（5196）

  Molex

  [Features]
  The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. (Mating housing: 5275/5277/5278, Compatible terminal: 5194/5225)

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  SPOX^TM 2.50 mm Pitch Mini-Latch Wire-to-Wire Plug Housing - 5240

  Molex

  The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. (Mating housing: 51191, conforming terminal: 5241)

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  Standard .093" Receptacle Housing（1490）

  Molex

  Molex power connectors, available in 5.03 mm, 6.30 mm and 6.70 mm pitch types. (Fitting Housing: 1490-P/1490-P1, Compatible Terminal: 1189)

  • Volume Discount

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Male Header with Solder Pin/734 Series Grade 1/Right Angle/3.81mm Pitch

  WAGO

  [Features]
  　• Can be horizontally mounted onto a printed circuit board using right-angle solder pins.
  　• Maximum rated current of 10 A is possible using a 1 x 1 mm pin size.
  　• Incorrect insertion is impossible.
  　• An accessory coding key can be attached.

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  Spring Type Connector, 733 Series, 2.5 mm Pitch, Female - Compact and Optimal for Sensor Connection.

  WAGO

  Male side can be connected to 733-200 with the female side of a spring-type connector, and the corresponding circuit board can be connected to 733-300 series connectors. The connector is ideal for sensor wires since it is very compact.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Spring Type Connector, 734 Series, 3.5 mm Pitch, Female

  WAGO

  Male side can be connected to 734-300 with the female side of a spring type connector, and the corresponding circuit board can be connected to 734-100 and 400 series connectors. The connector is ideal for sensor wires since it is very compact.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Spring Type Connector, 734 Series, 3.81 mm Pitch, Female

  WAGO

  The male side can be connected to 734-300 series connectors with the female spring connector side using a lock mechanism, and the corresponding circuit board can be connected to 3.81 mm pitch 734-200 series/400 series connectors.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Spring Type Connector, 734 Series, 3.81 mm Pitch, Female - Compact Connector

  WAGO

  The male side can be connected to 734-300 series connector with the female side of a spring type connector, and the corresponding circuit board can be connected to 3.81 mm pitch 734-200 series/400 series connectors. It is a very compact connector.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  CC-Link Socket Connector

  MISUMI

  Workload-saving realized. CC-Link Standard Connector

  • Volume Discount

  • For Power Supply
  • For Signal
  • CC-Link
  • Pressure Welding
  • No Need of Dedicated Tools
  • Gold Plated
  • One-Touch Lock

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  CC-Link Plug Connector

  MISUMI

  Workload-saving realized. CC-Link Standard Connector

  • Volume Discount

  • For Power Supply
  • For Signal
  • CC-Link
  • Pressure Welding
  • No Need of Dedicated Tools
  • Gold Plated
  • One-Touch Lock

  CAD ：

  2D

  Days to Ship:	8 Days or more

Loading...