UEM Ultra 30 End Mill AH10

•Model: Square
•Helix Angle (θ): Standard Helix (30 to 40°)
•Flute Shape: Sharp Corner
•Coating: Non-Coated
•Blade Diameter Tolerance (mm): +0.05～0

Part Number

Configured Part Number is shown.

Minimum order quantity	Volume Discount	Days to Ship	Blade diameter (D) (φ)	Blade length (ℓ) (mm)	Shank diameter (d) (mm)	Overall Length (L) (mm)	Neck Shape
1 Piece(s)	Available	8 Days or more	13	20	12	100	C
1 Piece(s)	Available	8 Days or more	14	20	16	100	A
1 Piece(s)	Available	8 Days or more	15	20	16	100	A
1 Piece(s)	Available	8 Days or more	16	20	16	100	B
1 Piece(s)	Available	8 Days or more	17	20	16	100	C
1 Piece(s)	Available	8 Days or more	18	20	20	125	A
1 Piece(s)	Available	8 Days or more	19	20	20	125	A
1 Piece(s)	Available	8 Days or more	20	20	20	125	B
1 Piece(s)	Available	8 Days or more	21	20	20	125	C
1 Piece(s)	Available	8 Days or more	22	20	20	125	C
1 Piece(s)	Available	8 Days or more	23	20	25	125	A
1 Piece(s)	Available	8 Days or more	24	20	25	125	A
1 Piece(s)	Available	8 Days or more	25	40	25	145	B
1 Piece(s)	Available	8 Days or more	26	40	25	145	C
1 Piece(s)	Available	8 Days or more	27	40	25	145	C
1 Piece(s)	Available	8 Days or more	28	40	25	145	C
1 Piece(s)	Available	8 Days or more	29	40	32	155	A
1 Piece(s)	Available	8 Days or more	31	40	32	155	A
1 Piece(s)	Available	8 Days or more	32	40	32	155	B
1 Piece(s)	Available	8 Days or more	33	40	32	155	C
1 Piece(s)	Available	8 Days or more	34	40	32	155	C
1 Piece(s)	Available	8 Days or more	35	40	32	155	C
1 Piece(s)	Available	8 Days or more	36	40	32	155	C
1 Piece(s)	Available	8 Days or more	37	40	32	155	C
1 Piece(s)	Available	8 Days or more	38	40	32	155	C
1 Piece(s)	Available	8 Days or more	39	50	42	170	A
1 Piece(s)	Available	8 Days or more	40	50	42	170	A
1 Piece(s)	Available	8 Days or more	45	50	42	170	C
1 Piece(s)	Available	8 Days or more	50	50	42	170	C

Work material	General steel / Quenched and tempered steel / Cast Iron / Aluminum / Copper / Resin	Number of flutes(sheet)	4	Type	Square
Coating	Non-Coated	Machining Application	Side / Groove	Blade tip shape	Pin Angle
Torsion Angle (θ)	Standard torsion (30-40°)	Blade diameter tolerance(mm)	+0.05～0

Configure

29 Part Numbers

Configure Remaining Specifications

Completed

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .