(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Stainless Steel Cylinder CJ5-S Series
- Volume Discount
[Features]
· Compatible with use in environments with water splashing, such as in food processing, etc.
· For use with grease for food processing (NSF-H1 certified product)
· Stainless steel (SUS304) is used for all external parts, improving resistance to corrosion even in environments with exposure to water
· A special scraper (standard equipment) prevents water from entering the cylinder
· NBR or FKM seals can be chosen to suit the application
(i)Caution
- Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
- CAD data is not available for some model numbers.
Part Number
Configured Part Number is shown.
Model Number Notation
Model Number Notation
Stainless Steel Cylinder CJ5-S Series Features
Stainless Steel Cylinder CJ5-S Series External Appearance
Stainless steel CJ5 S Series JIS symbol (double acting, single rod, rubber cushion)
External configuration that reduces liquid pooling
- Electrolytic polishing is carried out on the surface of the mounting brackets to make them smoother and prevent adhesion of liquids and contaminants.
- Provide plugs for unused mounting threads (CG5, S Series) to prevent accumulation of liquid in the mounting parts.
Specifications
| Tube Inner Diameter (mm) | 10 | 16 |
|---|---|---|
| Operating Method | Double acting, single rod | |
| Applicable Fluids | Air | |
| Proof Pressure | 1 MPa | |
| Maximum Operating Pressure | 0.7 MPa | |
| Minimum Operating Pressure | 0.1 MPa | |
| Ambient Temperature and Operating Fluid Temperature | Without auto switch: -10°C to +70°C, with auto switch: -10°C to +60°C | |
| Cushion | Rubber cushion | |
| Lubrication | Not required (non-lubricated) | |
| Stroke length tolerance | +1.0 0 | |
| Piston Speed | 50 to 750 mm/s | |
| Allowable Kinetic Energy | 0.035 J | 0.090 J |
| Mounting Support Type | Basic type, axial foot type, rod-end flange type, double clevis type | |
Standard Stroke Table
(Unit: mm)
| Tube Inner Diameter | Standard Stroke | Maximum Manufacturable Stroke |
|---|---|---|
| 10 | 15, 30, 45, 60, 75, 100, 125, 150 | 400 |
| 16 | 15, 30, 45, 60, 75, 100, 125, 150, 175, 200 |
- * Manufacture of intermediate strokes at 1‑mm increments is possible. (Spacers are not used.)
- * See mounting minimum stroke for auto switch mounting. (P. 1,077)
Structural Drawing (*Cannot be Disassembled)
Structural Drawing
Components
| Number | Name | Material | |
|---|---|---|---|
| 1 | Rod cover | SUS304 | |
| 2 | Head cover | SUS304 | |
| 3 | Cylinder tube | SUS304 | |
| 4 | Piston rod | SUS304 | |
| 5 | Mounting nut | SUS304 | |
| 6 | Rod end nut | SUS304 | |
| 7 | Label protective sheet | PET | |
| 8 | Water-resistant scraper | CJ5□□SR | NBR |
| CJ5□□SV | FKM | ||
*The material and surface treatment of component parts other than those listed above are the same as the standard type in the CJ2 Series.
Drawing
Basic Type (B) / C□J5B□SR / V
Basic Type (B) / C□J5B□SR / V Drawing
(Unit: mm)
| Tube Inner Diameter (mm) | A | BA | BB | CA | CB | D | F | GA | GB | H | MM | NN | NA | NB | NDh8 | S | Z |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 | 15 | 15 | 12 | 17 | 14 | 4 | 8 | 8 | 5 | 28 | M4 × 0.7 | M10 × 1.0 | 12.5 | 9.5 | 10(-0.022 to 0) | 46 | 74 |
| 16 | 15 | 18.3 | 18.3 | 20 | 20 | 5 | 8 | 8 | 5 | 28 | M5 × 0.8 | M12 × 1.0 | 12.5 | 9.5 | 12(-0.027 to 0) | 47 | 75 |
Axial Foot Type (L) / C□J5L□SR / V
Axial Foot Type (L) / C□J5L□SR / V Drawing
(Unit: mm)
| Tube Inner Diameter (mm) | A | BA | BB | CA | CB | D | F | GA | GB | H | LB | LC | LH | LT | LX | LY | LZ | MM | NN | NA | NB | S | X | Y | Z |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 | 15 | 15 | 12 | 17 | 14 | 4 | 8 | 8 | 5 | 28 | 21.5 | 5.5 | 14 | 2.5 | 33 | 25 | 42 | M4 × 0.7 | M10 × 1.0 | 12.5 | 9.5 | 46 | 6 | 9 | 74 |
| 16 | 15 | 18.3 | 18.3 | 20 | 20 | 5 | 8 | 8 | 5 | 28 | 23 | 5.5 | 14 | 2.5 | 33 | 25 | 42 | M5 × 0.8 | M12 × 1.0 | 12.5 | 9.5 | 47 | 6 | 9 | 75 |
- * Refer to p. 1,068 of the manufacturer's catalog for other models' drawings, specifications, etc.
Loading...
Basic Information
| Cylinder Operation Method | Double Acting | Main Body Shape | Standard | Additional Function | Standard |
|---|---|---|---|---|---|
| Environment, Applications | Standard | Cushion | Rubber cushion | Operating Pressure(MPa) | 01 to 0.7 |
| Port thread type | M Screw |
Specification/Dimensions
-
Rod Operation Method
- Single Rods
- Double rod
-
Cylinder (Tube) Inner Diameter(φ)
-
Stroke(mm)
-
Specifications
-
Auto Switches
-
Lead Wire Length(m)
- 3
- 5
- N/A
-
The number of the switches
-
Type of Auto Switch Mounting
- N/A
-
Head Cover Port Position
- 90° to axis
- Axial direction
-
Type of Mount Support
- Axial foot type
- Basic type
- U-Shaped Clevis Type
-
Custom-made Specifications
- None
-
Material of Gasket
- FKM
- NBR
-
type
- CDJ5□S
- CJ5□S
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 8 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Air Cylinder, Single Acting, Spring Return CJ1 Series
- Smooth Cylinder CA2Y Series
- CVM3 Series Valve Mounted Cylinder, Single Acting, Spring Return/Extend
- Air Cylinder, Standard Type: Double Acting, Double Rod CM2W Series
- Air Cylinder, Non-Rotating Rod Type: Double Acting, Single Rod CM2K Series
- Air Cylinder, Standard Type: Double Acting, Single Rod CJ2 Series
- Air Cylinder, Direct Mount Type, Double Acting, Single Rod CJ2R Series
- Air Cylinder With Improved Water Resistance, Standard Type, Double Acting, Single Rod CG1 Series
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy