(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Cutting Fiber 

Cutting Fiber :Related Image
Part Number
CFM-S-2
Part NumberMinimum order quantityVolume DiscountDays to Ship
1 Piece(s)Available

8 Days or more

Loading...

  1. 1

Specifications

Cutting Fiber :Related Image

● Brush

Model Number No. Wire Type Diameter
D1
Wire Length
L1
Compatible Sleeve ● Stocked Item
□ Non-Stocked Item
CFM−B R100 Red 100 75 CFM−S−100
R 60 60 CFM−S−60
1 40 CFM−S−1
2 25 CFM−S−2
3 15 50 CFM−S−3
4 6 30 CFM−S−4
W100 White 100 75 CFM−S−100
W 60 60 CFM−S−60
5 40 CFM−S−1
6 25 CFM−S−2
7 15 50 CFM−S−3
8 6 30 CFM−S−4
CFM−B−HP
15 Pink 15 50 CFM−S−3
3 3 30


[ ! ] The brush is used with a sleeve as a set.

● Sleeve

Model Number No. Shaft Diameter
D2
Sleeve Diameter
D3
Total Length
L2
Shaft Length
L3
● Stocked Item
□ Non-Stocked Item
CFM−S 100 16 110 162 40
60 12 65 150 35
1 8 45 140 30
2 8 30 140 30
3 6 18 90 29
4 6 10 70 29

More Information

■ Usage
● Efficient for removing extremely fine burrs produced after machining with a base thickness of 0.1 mm or less.
● It is suitable for machining with a machining center, dedicated machine or drilling machine and enables easy automation.
● It is ideal for surface grinding and removing extremely fine burrs on parts of cars, aircraft and machines.
● It greatly improves surface roughness in a short time to reduce the time taken for the polishing process.


A brush wire is used instead of a ceramic fiber stick grindstone.
The wire tip has excellent cutting ability.
The wire will not spread as it is used.

■ About the wire
● The white is thick, durable and excellent in cutting properties. For hard ferrous work materials.
● The red is thinner than the white, with excellent fitting and is suitable for removing extremely fine burrs. For free-cutting material.
● The pink is the softest and only removes burrs while preventing edge undercut.

■ Operating Precautions
[Maximum operating rotation speed]
● It is dangerous to exceed the maximum operating rotation speed since the brush may break.
[Cut Depth / Cutting Load]
● It is not efficient and also shortens the life of the brush due to rapid wire abrasion if the product is used with an excessive cut depth or cutting load.
● It is most effective to cut material at the wire tip.
[Adjusting Wire Protrusion Amount]
● Use it after adjusting flexibility and traceability by mounting a sleeve (outer cylinder part) to the outer circumference of the brush body to adjust the wire protrusion amount from the sleeve. Flexibility and traceability improve with an increased protrusion amount and worsen with a decreased protrusion amount. It is dangerous to exceed the protrusion amount since the brush may break.
[Hair Length]
● When the total length of the wire (hair length) is shortened as you use the product, its cutting ability tends to increase and its fitting tends to decrease. Therefore, adjust its cutting ability and fitting by reducing the rotation speed / cut depth.
[Dry / Wet Machining]
● Both dry and wet machining are possible. Wet machining has a slightly better cutting ability. Collect the dust generated with dry machining with a device such as a dust collector.

■ How to Use (Recommended Machining Conditions for Removing Extremely Fine Burrs)

Diameter
D1
Maximum Operating
Rotation Speed
(min-1)
Feed
(mm/min)
Cut Depth
(mm)
Brush Protrusion Amount
(mm)
100 1,200 2,400
(When Removing Burrs)

1,000
(When Polishing)
1.0
(Hard Material such as Iron)

0.5
(Soft Material such as Aluminum)
15
60 2,000
40 3,000
25 5,000
15 6,000 10
6 10,000 5



 * Tested at 80% of the maximum operation rotation speed.
 * Feed speed is in inverse proportion to cutting ability. When the feed is doubled, the cutting amount will be decreased by half.
 * Use a float holder (P.983) for more stable machining.

Cutting Fiber :Related Image

Example

Cutting Fiber :Related Image

 

Cutting Fiber :Related Image

Basic Information

Product Model Automatic Commodity Contents Brush Product Model Sleeve
Shaft Diameter D2(mm) 8 Sleeve Diameter D3(mm) 30 Total Length L2(mm) 140
Shaft Length L3(mm) 30

Please check the type/dimensions/specifications of the part CFM-S-2 in the Cutting Fiber  series.

Additional Products in this Category

Complementary Products

Tech Support