(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
TSC Series Carbide Tapered Neck Radius End Mill, 2-Flute/Tapered Neck Model
- Volume Discount
High-Precision Tapered Neck Radius
- TS
- General Steel
- 2 Flutes
Part Number
Configured Part Number is shown.
Loading...
Specifications
Model Number
TSC-REM2PB (Stocked Product)
| Outer Diameter D |
Neck Gradient θ1 |
Length Under Neck ℓ1 |
Radius R |
Under Neck Diameter d1 |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure |
| 0.2 | 1° | 1 | 0.05 | 0.22 | 0.16 | 50 | 4 | 1 |
| 2 | 0.26 | |||||||
| 3° | 1 | 0.26 | ||||||
| 2 | 0.37 | |||||||
| 5° | 1 | 0.30 | ||||||
| 2 | 0.48 | |||||||
| 0.3 | 1° | 2 | 0.05 | 0.35 | 0.24 | 50 | 4 | 1 |
| 3 | 0.38 | |||||||
| 3° | 2 | 0.45 | ||||||
| 3 | 0.55 | |||||||
| 5° | 2 | 0.54 | ||||||
| 3 | 0.72 | |||||||
| 0.4 | 1° | 3 | 0.05 0.1 | 0.48 | 0.28 | 50 | 4 | 1 |
| 4 | 0.51 | |||||||
| 3° | 3 | 0.63 | ||||||
| 4 | 0.74 | |||||||
| 5° | 3 | 0.78 | ||||||
| 4 | 0.96 | |||||||
| 0.5 | 1° | 3 | 0.05 0.1 | 0.57 | 0.32 | 50 | 4 | 1 |
| 5 | 0.64 | |||||||
| 8 | 0.74 | |||||||
| 10 | 0.81 | |||||||
| 12 | 0.88 | |||||||
| 3° | 3 | 0.71 | ||||||
| 5 | 0.92 | |||||||
| 8 | 1.23 | |||||||
| 10 | 1.44 | |||||||
| 12 | 1.65 | |||||||
| 5° | 3 | 0.85 | ||||||
| 5 | 1.20 | |||||||
| 8 | 1.72 | |||||||
| 10 | 2.07 | |||||||
| 0.8 | 1° | 5 | 0.05 0.1 0.2 | 0.92 | 0.64 | 50 | 4 | 1 |
| 8 | 1.02 | |||||||
| 3° | 5 | 1.16 | ||||||
| 8 | 1.47 | |||||||
|
1 |
1° | 6 | 0.05 0.1 0.2 0.3 | 1.14 | 0.8 | 50 | 4 | 1 |
| 10 | 1.28 | |||||||
| 15 | 1.45 | |||||||
| 20 | 1.63 | 70 | ||||||
| 25 | 1.80 | |||||||
| 30 | 1.98 | |||||||
| 35 | 2.15 | 100 | ||||||
| 3° | 6 | 1.42 | 50 | |||||
| 10 | 1.84 | |||||||
|
1.5 |
1° | 10 | 0.1 0.2 0.3 | 1.74 | 1.2 | 50 | 4 | 1 |
| 15 | 1.92 | |||||||
| 20 | 2.09 | 70 | ||||||
| 25 | 2.27 | |||||||
| 30 | 2.44 | |||||||
| 3° | 10 | 2.23 | 50 | |||||
| 15 | 2.76 | |||||||
|
2 |
1° | 15 | 0.1 0.2 0.3 0.5 | 2.38 | 1.6 | 50 | 4 | 1 |
| 20 | 2.56 | 70 | ||||||
| 25 | 2.73 | |||||||
| 30 | 2.91 | |||||||
| 40 | 3.26 | 100 | ||||||
| 50 | 3.61 | |||||||
| 3° | 15 | 3.15 | 50 | |||||
| 20 | 3.68 | 70 | ||||||
|
3 |
1° | 15 | 0.2 0.5 | 3.31 | 2.4 | 70 | 6 | 2 |
| 20 | 3.49 | |||||||
| 30 | 3.84 | |||||||
| 40 | 4.19 | 100 | ||||||
| 50 | 4.54 | |||||||
| 60 | 4.89 |
Model Number
TN-TSC-CR-EM2S (Manufactured Product)
| Outer Diameter D |
Radius R |
Neck Gradient θ1 0.5° Increment Designation |
Length Under Neck ℓ1 1 mm Increment Designation |
Under Neck Diameter d1 |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure |
|
1 |
0.1 0.2 0.3 | 2.5° ~ 5° | 7 ~ 19 | - | 2 | 40 | 4 | 2 |
|
1.5 |
0.1 0.2 0.3 | 2.5° ~ 3° | 8 ~ 20 | - | 3 | 40 | 4 | 2 |
| 0.1 0.2 0.3 | 3.5° ~ 5° | 8 ~ 17 | - | |||||
|
2 |
0.1 0.2 0.3 0.5 | 0.5° ~ 3° | 9 ~ 21 | - | 4 | 40 | 4 | 2 |
| 0.1 0.2 0.3 0.5 | 3.5° ~ 5° | 9 ~ 15 | - | |||||
|
3 |
0.1 0.2 0.3 0.5 | 0.5° ~ 5° | 9 ~ 15 | - | 6 | 45 | 6 | 2 |
[ ! ]When ordering manufactured products, be sure to refer to an ordering example as the points below differ from when ordering a stocked product.
(1) "TN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number. (3) The order for specifying the "radius" differs from that of stocked products.
For Cutting Conditions, Refer to >>Click here.
More Information
● It adopts a short flute length and back-tapered peripheral cutting edge for suppressing chatter.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.
Basic Information
| Number of Flutes(sheet) | 2 | Model | Tapered Neck Radius | Processing Applications | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Helix Angle (Θ) | Standard Helix (30 to 40°) |
Specification/Dimensions
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Work Material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel ~ HRC55
- Stainless Steel
- Cast Iron
- Aluminum Alloy
- Copper Alloy
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Length Under Neck (ℓ1)(mm)
-
R Precision(µm)
-
Additional Classification
- Manufactured Product
- Stocked Product
-
Neck Gradient(Degree)
- 1
- 3
- 5
-
#6
-
#7
-
type
- TN-TSC-CR-EM2S
- TSC-REM2PB
Days to Ship
-
- All
- 8 Days or Less
- 10 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- TSC Series Carbide Radius End Mill, High-feed, High-rigidity, 4-Flute, 45° Spiral/Short Model
- TSC Series Carbide Radius End Mill, 4-Flute, 45° Spiral/Short Model
- Non-Coated TS Coated Carbide 0.1mm Unit Radius Designated End Mill
- DLC Mill, Radius 2DLCM-R
- 2-Flute, Corner R Short Type FX-CR-EDS-6
- End Mill with 2 Carbide Flutes and Corner Radius KSER-2
- Uneven Lead End Mill (4 Flutes) for Machining FX Coated Titanium Alloy
- Uneven Lead End Mill (5 Flutes) for Machining FX Coated Titanium Alloy
Complementary Products
-
4-Flute, Unequal Lead, Corner R, Short, Strong Heavy-Cutting Model NEO-CR-PHS
OSG Days to Ship : 8 Days or more
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy