(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Compatible with Deep Engraving.
Part Number
Configured Part Number is shown.
TSC-PEM2L8
Part Number |
---|
TSC-PEM2L8 |
Loading...
Model Number
TSC-EM2L (Standard)
Outer Diameter D |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
1 | 4 | 45 | 4 | 1 | ● |
1.5 | 6 | 45 | 4 | 1 | ● |
2 | 8 | 45 | 4 | 1 | ● |
2.5 | 10 | 45 | 4 | 1 | ● |
3 | 12 | 50 | 6 | 1 | ● |
3.01 ~ 3.49 | 14 | 50 | 6 | 1 | □ |
3.5 | 14 | 50 | 6 | 1 | ● |
3.51 ~ 3.99 | 16 | 60 | 6 | 1 | □ |
4 | 16 | 60 | 6 | 1 | ● |
4.01 ~ 4.49 | 18 | 60 | 6 | 1 | □ |
4.5 | 18 | 60 | 6 | 1 | ● |
4.51 ~ 4.99 |
20 |
60 |
6 |
1 | □ |
5 |
20 |
60 |
6 |
1 | ● |
5.01 ~ 5.49 |
22 |
60 |
6 |
1 | □ |
5.5 |
22 |
60 |
6 |
1 | ● |
5.51 ~ 5.99 |
24 |
60 |
6 |
1 | □ |
6 |
24 |
60 |
6 |
2 | ● |
7.51 ~ 7.99 |
32 |
100 |
8 |
1 | □ |
8 |
32 |
100 |
8 |
2 | ● |
9.51 ~ 9.99 |
40 |
100 |
10 |
1 | □ |
10 |
40 |
100 |
10 |
2 | ● |
11.51 ~ 11.99 |
48 |
100 |
12 |
1 | □ |
12 |
48 |
100 |
12 |
2 | ● |
[ ! ]Outer diameters of manufactured products are designated in 0.01 mm increments
For Cutting Conditions, Refer to >>Click here.
TSC-PEM2L (Sharp Edge)
Outer Diameter D |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
1 | 4 | 45 | 4 | 1 | ● |
1.5 | 6 | 45 | 4 | 1 | ● |
2 | 8 | 45 | 4 | 1 | ● |
2.5 | 10 | 45 | 4 | 1 | ● |
3 | 12 | 50 | 6 | 1 | ● |
3.01 ~ 3.49 | 14 | 50 | 6 | 1 | □ |
3.5 | 14 | 50 | 6 | 1 | ● |
3.51 ~ 3.99 | 16 | 60 | 6 | 1 | □ |
4 | 16 | 60 | 6 | 1 | ● |
4.01 ~ 4.49 | 18 | 60 | 6 | 1 | □ |
4.5 | 18 | 60 | 6 | 1 | ● |
4.51 ~ 4.99 |
20 |
60 |
6 |
1 | □ |
5 |
20 |
60 |
6 |
1 | ● |
5.01 ~ 5.49 |
22 |
60 |
6 |
1 | □ |
5.5 |
22 |
60 |
6 |
1 | ● |
5.51 ~ 5.99 |
24 |
60 |
6 |
1 | □ |
6 |
24 |
60 |
6 |
2 | ● |
7.51 ~ 7.99 |
32 |
100 |
8 |
1 | □ |
8 |
32 |
100 |
8 |
2 | ● |
9.51 ~ 9.99 |
40 |
100 |
10 |
1 | □ |
10 |
40 |
100 |
10 |
2 | ● |
11.51 ~ 11.99 |
48 |
100 |
12 |
1 | □ |
12 |
48 |
100 |
12 |
2 | ● |
[ ! ]Outer diameters of manufactured products are designated in 0.01 mm increments
For Cutting Conditions, Refer to >>Click here.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
Work Material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Square |
---|---|---|---|---|---|
Coating | For High Hardness (Silicone-Based) | Helix Angle (θ) | Standard Helix (30 to 40°) | Tolerance of OD(mm) | 0 ~ -0.02 |
Please check the type/dimensions/specifications of the part TSC-PEM2L8 in the TSC Series Carbide Square End Mill, 2-Flute/4D Flute Length (Long) Model series.
Part Number |
---|
TSC-EM2L1 |
TSC-EM2L1.5 |
TSC-EM2L10 |
TSC-EM2L11.51 |
TSC-EM2L11.70 |
TSC-EM2L11.80 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy