(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Motorized Z-Axis Stages - Cross Roller Guide, Standard, ZMPG (ZMPG730-R-C-N)
- New Products
- Volume Discount
Z-Axis Stage; lightweight and compact with excellent accuracy.
- inCAD Components
(i)Caution
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Part Number
Configured Part Number is shown.
ZMPG730-R-C-N
![[Motorized] Z-Axis - Cross Roller:Related Image](http://mx.misumi-ec.com/en/linked/item/10302760830/img/drw_01.gif)
![[Motorized] Z-Axis - Cross Roller:Related Image](http://mx.misumi-ec.com/en/linked/item/10302760830/img/drw_02.gif)
[ M ] Material: Aluminum Alloy
[ S ] Surface Treatment: Black Anodize
[ A ] Accessory: SCB4-10 (4 pcs.)
[ S ] Surface Treatment: Black Anodize
[ A ] Accessory: SCB4-10 (4 pcs.)
Specifications
| Part Number | - | Sensor | - | Motor | - | Cable |
| ZMPG730 ZMPG730 |
- - |
L R |
- - |
C MS |
- - |
N N |
| Part Number | Sensor | Motor | Cable | Mechanical Standards | Accuracy Standards *1 | |||||
| Type | No. | Cover Position | Stage Surface (mm) | Travel Distance (mm) | Weight (kg) | Unidirectional Positioning Accuracy | Pitching | Yawing | ||
| ZMPG | 730 | L (Standard) R (Reversed) |
C (Standard) |
N (Cable not included (separately sold)) |
60×70 | 30 | 0.9 | 5µm or less / Full Stroke | 25'' | 20'' |
| MS (38 Micro Step) |
1.1 | |||||||||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Loading...
More Information
![[Motorized] Z-Axis - Cross Roller:Related Image](http://mx.misumi-ec.com/en/linked/item/10302760830/img/oth_02.gif)
![[Motorized] Z-Axis - Cross Roller:Related Image](http://mx.misumi-ec.com/en/linked/item/10302760830/img/oth_04.gif)
■Common Specifications
*2. This represents the travel distance of stage per one pulse signal.
*3. The values in ( ) are for Motor Option MS (Micro Step).
*4. This represents the max. speed that can be driven by the recommended controller switched to Full Step mode, with the max. load applied.
(The value differs depending on the current driving controller and the current load.)
The value differs depending on the motor option.
[ ! ]The above specifications table is for a single axis stage placed flatly.
| Feed Screw | Ball Screw Ø8, Lead 1 | |
| Guide | Cross Roller Guide | |
| Resolution *2 | Full | 2µm (1µm)*3 |
| Half | 1µm(0.5µm)*3 | |
| Fine Feed (upon 1/20 partitioned) | 0.05µm | |
| Max. Speed *4 | 20mm/sec | |
| Positioning repeatability | Within ±0.2µm | |
| Load Capacity | 29.4N | |
| Lost Motion | 1µm or less | |
| Backlash | 0.5µm or less | |
| Straightness | 3µm or less | |
| Parallelism | 30µm or less | |
| Motion Parallelism | 10µm or less | |
*3. The values in ( ) are for Motor Option MS (Micro Step).
*4. This represents the max. speed that can be driven by the recommended controller switched to Full Step mode, with the max. load applied.
(The value differs depending on the current driving controller and the current load.)
The value differs depending on the motor option.
[ ! ]The above specifications table is for a single axis stage placed flatly.
■Electrical Specifications
[ ! ]Sensors with Part Number PM-□24 are to be discontinued and replaced by next-generation products with Part Number PM-□25 from April 2017.
| Part Number | C | MS | |
| Standard | 38 Micro Step | ||
| Motor | Type | 5-Phase Stepping Motor 0.75A/Phase (Oriental Motor Co., Ltd.) | |
| Part Number | PMM33BH2-C16-1(#28mm) | C7214-9015-1(#38mm) | |
| Step Angle | 0.72° | 0.36° | |
| Driver Part Number | - | ||
| Connector | Part Number | HR10A-10J-12P (73) (Hirose Electric Co., LTD.) | |
| Applicable Receptacle Connector | HR10A-10P-12S (73) (Hirose Electric Co., LTD.) | ||
| Contact Part Number | - | ||
| Applicable Receptacle Contact Part Number | - | ||
| Sensor | Limit Sensor | Provided | |
| Slit Home Origin Sensor | Provided | ||
| Home Sensor | - | ||
| Part Number | Photomicrosensor: PM-L25 (Panasonic Industrial Devices SUNX Co., Ltd.) | ||
| Power Supply Voltage | DC5~24V or less ±10% | ||
| Current Consumption | 45mA or less (15mA or less per Sensor) | ||
| Control Output | NPN Open Collector Output DC30V or less, 50mA or less Residual Voltage 2V or less (when load current is 50mA) Residual Voltage 1V or less (when load current is 16mA) | ||
| Output Logic | Detecting (Dark): Output Transistor OFF (Non-Conducting) | ||
Basic Information
| Type | Z-Axis Motorized Stages | Resolution(µm) | 2μm | Material | Aluminum |
|---|---|---|---|---|---|
| Guide | Cross Roller | Table feeding methods | Ball screw | Table Length(mm) | 70 |
| Table width(mm) | 60 | Stroke (Z Distance)(mm) | 30 | Surface Treatment | Black Anodize |
| Through Hole (Table Center Hole) | No | Load Capacity (Range)(N) | 5~30 | Allowable Load(N) | 29.4 |
| Maximum Velocity(mm/sec) | 20 | Positioning Accuracy(µm) | 5 | Table Straightness(µm) | 3 |
| Motor type | b:Stepper Motor (5-Phase Standard) | Cable | Cable not included |
Please check the type/dimensions/specifications of the part ZMPG730-R-C-N in the Motorized Z-Axis Stages - Cross Roller Guide, Standard, ZMPG series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| ZMPG730-L-C-N |
Additional Products in this Category
- Motorized Z-Axis Stages - Linear Ball Guide, Low Profile, ZMSG
- Motorized Z-Axis Stages - Linear Ball Guide, Compact, ZCV
- Motorized Z-Axis Stages - Cross Roller Guide, Compact, ZCR
- Motorized XYZ-Axis Stages - Cross Roller, Standard, XYZCR Series
- Motorized Z-Axis Stages - Linear Ball Guide, 30-75 mm Travel, ZCVL/ZCVLC
- Motorized Z-Axis Stages - Cross Roller Guide, Horizontal Surface, ZLMPG/ZLMPTG
- Horizontal Surface Z-Axis Cross Roller Guide (KHC/KS332)
- Motorized Z-Axis Stages - Linear Ball Guide, Horizontal Surface, Cost Saving, KHE
Complementary Products
-
Motorized Z-Axis Stages - Linear Ball Guide, 30-75 mm Travel, ZCVL/ZCVLC
MISUMI Days to Ship : 12 Days or more
-
Motorized Z-Axis Stages - Linear Ball Guide, Low Profile, ZMSG
MISUMI Days to Ship : 12 Days or more
-
Motorized X-Axis Stages - Linear Ball Guide, Stroke 100-300 mm, XCVL/XCVLC
MISUMI Days to Ship : 12 Days or more
-
Motorized X-Axis Stages - Linear Ball Guide, Low Profile, XMSG
MISUMI Days to Ship : 12 Days or more
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy