(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
•Material: ABS Resin
•Grade: Standard
•Finishing Method: Saw Cut
•A·B Dimension Tolerance (mm): ±1.0
•T Dimension Tolerance (mm): 0~+2.5
Part Number
Configured Part Number is shown.
Type | [ M ]Material | Color | Operating Ambient Temperature |
NABS | ABS Resin | Natural Color | Ambient Temp. ~ 50°C |
Part Number | - | A | - | B | - | T |
NABS | - | 300 | - | 200 | - | 10 |
Part Number | - | A | - | B | - | T | - | F | - | G | - | Screw Nominal Dia. | - | L |
NABS 2H | - | 180 | - | 100 | - | 10 | - | F80 | - | G60 | - | M5 | - | L5 |
Part Number | A | B | T |
Type | 1mm Increment | Selection | |
NABS (ABS ResinPlates) | 20~500 | 20~400 | 5, 6, 8, 10, 15, 20 |
T | T Dimension Tolerance | Rate of Camber and Torsion per 1,000mm |
5 | ±0.5 | 1.5% or Less |
6 | ±0.6 | |
8 | ||
10 | ±0.8 | |
15 | 0~+2.5 | 1.0% or Less |
20 |
A, B | A, B Dimension Tolerance |
Unit: mm | |
~99 | ±0.5 |
100~250 | ±0.75 |
251~ | ±1.0 |
Part Number | A | B | T | F | G | Pre-drilled Hole Nominal Dia. | ||||
Through Hole | Counterbore Hole | Threaded Insert | ||||||||
Type | Number of Holes | 1mm Increment | Selection | 0.5mm Increment | N | Z | M | L | ||
NABS (ABS ResinPlates) | 2H 4H 6H | 20~500 | 20~400 | 5 | 6~491.5 (2H, 4H) 6~245.5 (6H) | 4.5~395.5 (2H) 6~391.5 (4H, 6H) | 3 4 5 6 8 10 | - | 3 4 | (Threaded Insert Length) Select from Table 1 |
6 | 3 | 3 4 5 | ||||||||
8 | 3 4 5 | 3 4 5 6 | ||||||||
10 | 3 4 5 6 | 3 4 5 6 8 | ||||||||
15 | 4 5 6 8 | 3 4 5 6 8 10 | ||||||||
20 | 4 5 6 8 | 3 4 5 6 8 10 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
NABS4H-[20-500/1]-[20-400/1]-[5,6,8,10,15,20]-F[6-491.5/0.5]-G[6-391.5/0.5]-M[3,4,5,6,8,10] |
NABS4H-[20-500/1]-[20-400/1]-[5,6,8,10,15,20]-F[6-491.5/0.5]-G[6-391.5/0.5]-N[3,4,5,6,8,10] |
NABS4H-[20-500/1]-[20-400/1]-[5,6,8,10,15,20]-F[6-491.5/0.5]-G[6-391.5/0.5]-Z[3,4,5,6,8] |
Loading...
Material | ABS Resin | Grade | Standard | Color | Natural Color |
---|---|---|---|---|---|
Material | ABS Resin |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy