(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 p.m. 11/23/2024 to 5:00 p.m. (CST) 11/24/2024. We apologize for the inconvenience.
Plastic Plates - Polyethylene, Holes Optional
If finish-machined, these plate become more convenient.
- inCAD Components
(i)Caution
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Part Number
Configured Part Number is shown.
・Materials
[ M ] Material: Ultra High-Molecular-Weight Polyethylene (UHMWPE)
| Type | [ M ]Grade | Color | Operating Ambient Temperature |
| UPA | Standard | Milky White | -100~80°C |
| UPACA | Electrical Conductivity | Black |
Specifications
■Standard Type
■Pre-drilled, Threaded Insert Type
| Part Number | - | A | - | B | - | T |
| UPA | - | 150 | - | 118 | - | 5 |
| Part Number | - | A | - | B | - | T | - | F | - | G | - | Screw Nominal Dia. | - | L |
| UPA2H UPA2H | - - | 50 200 | - - | 25 100 | - - | 8 10 | - - | F34 F70 | - - | G10 G20 | - - | N4 M5 | - | L7.5 |
■Standard Type
[ ! ]For T1.0, 2.0, see P.973.
| Part Number | A | B | T |
| Type | 1mm Increment | Selection | |
| UPA (Standard) | 20~500 | 20~400 | 3, 5, 8, 10, 15, 20 |
| UPACA (Conductive) | 20~500 | 20~400 | 10, 15, 20 |
| [ ! ]T3 and T5 have camber. T3 has especially large camber. | |||
• T Dimension Tolerance, Rate of Camber and Torsion
•Dimension Tolerances of A and B
| T | T Dimension Tolerance | Rate of Camber and Torsion per 1,000mm | |
| UPA | UPACA | ||
| 3 | -0.2~+0.5 | - | 10% or Less |
| 5 | 0~+0.8 | - | 2.0% or Less |
| 8 | 0~+1.0 | - | |
| 10 | 0~+1.5 | +0.4~+1.0 | 1.5% or Less |
| 15 | 0~+2.0 | ||
| 20 | 0~+2.5 | ||
•Dimension Tolerances of A and B
| A, B | A, B Dimension Tolerance |
| Unit: mm | |
| ~99 | ±0.5 |
| 100~250 | ±0.75 |
| 251~ | ±1.0 |
■Pre-drilled Type
[ ! ]Dimension F Specification Range: For 2H and 4H, d(d1)+2.5≤F≤A-d(d1)-5; for 2HL, d(d1)/2+2.5≤F≤A-d(d1)/2-2.5; for 6H, d(d1)+2.5≤F≤(A-d(d1)-5)/2.
[ ! ]Dimension G Specification Range: For 2H, d(d1)/2+2.5≤G≤B-d(d1)/2-2.5; for 2HL, 4H and 6H, d(d1)+2.5≤G≤B-d(d1)-5.
(d for through hole and threaded insert, d1 for counterbore)
[ ! ]For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).
| Part Number | A | B | T | F | G | Pre-drilled Hole Nominal Dia. | |||||||||||||
| Type | Hole Dia. | Through Hole | Counterbore Hole | Threaded Insert | |||||||||||||||
| 1mm Increment | UPA | UPACA | 0.5mm Increment | N | Z | M | L | ||||||||||||
| UPA (Standard) UPACA (Conductive) | 2H 2HL 4H 6H | 20~500 | 20~400 | 3 | - | 6~491.5 (2H, 4H) 4.5~495.5 (2HL) 6~245.5 (6H) | 4.5~395.5 (2H) 6~391.5 (2HL, 4H, 6H) | 3 4 5 6 8 10 | - | - | - | ||||||||
| 5 | - | - | 3 | 4 | (Threaded Insert Length) Select from Table 1 | ||||||||||||||
| 8 | - | 4 | 5 | 3 | 4 | 5 | 6 | ||||||||||||
| 10 | 10 | 4 | 5 | 6 | 3 | 4 | 5 | 6 | 8 | ||||||||||
| 15 | 15 | 4 | 5 | 6 | 8 | 3 | 4 | 5 | 6 | 8 | 10 | ||||||||
| 20 | 20 | 4 | 5 | 6 | 8 | 3 | 4 | 5 | 6 | 8 | 10 | ||||||||
[ ! ]Dimension G Specification Range: For 2H, d(d1)/2+2.5≤G≤B-d(d1)/2-2.5; for 2HL, 4H and 6H, d(d1)+2.5≤G≤B-d(d1)-5.
(d for through hole and threaded insert, d1 for counterbore)
[ ! ]For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| UPA2H-[20-500/1]-[20-400/1]-[3,5,8,10,15,20]-F[6-491.5/0.5]-G[4.5-395.5/0.5]-M[3,4,5,6,8,10] |
| UPA2H-[20-500/1]-[20-400/1]-[3,5,8,10,15,20]-F[6-491.5/0.5]-G[4.5-395.5/0.5]-N[3,4,5,6,8,10] |
| UPA2H-[20-500/1]-[20-400/1]-[3,5,8,10,15,20]-F[6-491.5/0.5]-G[4.5-395.5/0.5]-Z[3,4,5,6,8] |
| UPA2HL-[20-500/1]-[20-400/1]-[3,5,8,10,15,20]-F[4.5-395.5/0.5]-G[6-391.5/0.5]-M[3,4,5,6,8,10] |
| UPA2HL-[20-500/1]-[20-400/1]-[3,5,8,10,15,20]-F[4.5-395.5/0.5]-G[6-391.5/0.5]-N[3,4,5,6,8,10] |
| UPA2HL-[20-500/1]-[20-400/1]-[3,5,8,10,15,20]-F[4.5-395.5/0.5]-G[6-391.5/0.5]-Z[3,4,5,6,8] |
| UPA4H-[20-500/1]-[20-400/1]-[3,5,8,10,15,20]-F[6-491.5/0.5]-G[6-391.5/0.5]-M[3,4,5,6,8,10] |
| UPA4H-[20-500/1]-[20-400/1]-[3,5,8,10,15,20]-F[6-491.5/0.5]-G[6-391.5/0.5]-N[3,4,5,6,8,10] |
| UPA4H-[20-500/1]-[20-400/1]-[3,5,8,10,15,20]-F[6-491.5/0.5]-G[6-391.5/0.5]-Z[3,4,5,6,8] |
| UPA6H-[20-500/1]-[20-400/1]-[3,5,8,10,15,20]-F[6-245.5/0.5]-G[6-391.5/0.5]-M[3,4,5,6,8,10] |
| UPA6H-[20-500/1]-[20-400/1]-[3,5,8,10,15,20]-F[6-245.5/0.5]-G[6-391.5/0.5]-N[3,4,5,6,8,10] |
| UPA6H-[20-500/1]-[20-400/1]-[3,5,8,10,15,20]-F[6-245.5/0.5]-G[6-391.5/0.5]-Z[3,4,5,6,8] |
| UPA-[20-500/1]-[20-400/1]-[3,5,8,10,15,20] |
| UPACA2H-[20-500/1]-[20-400/1]-[10,15,20]-F[6-491.5/0.5]-G[4.5-395.5/0.5]-M[3,4,5,6,8,10] |
| UPACA2H-[20-500/1]-[20-400/1]-[10,15,20]-F[6-491.5/0.5]-G[4.5-395.5/0.5]-N[3,4,5,6,8,10] |
| UPACA2H-[20-500/1]-[20-400/1]-[10,15,20]-F[6-491.5/0.5]-G[4.5-395.5/0.5]-Z[4,5,6,8] |
| UPACA2HL-[20-500/1]-[20-400/1]-[10,15,20]-F[4.5-395.5/0.5]-G[6-391.5/0.5]-M[3,4,5,6,8,10] |
| UPACA2HL-[20-500/1]-[20-400/1]-[10,15,20]-F[4.5-395.5/0.5]-G[6-391.5/0.5]-N[3,4,5,6,8,10] |
| UPACA2HL-[20-500/1]-[20-400/1]-[10,15,20]-F[4.5-395.5/0.5]-G[6-391.5/0.5]-Z[4,5,6,8] |
| UPACA4H-[20-500/1]-[20-400/1]-[10,15,20]-F[6-491.5/0.5]-G[6-391.5/0.5]-M[3,4,5,6,8,10] |
| UPACA4H-[20-500/1]-[20-400/1]-[10,15,20]-F[6-491.5/0.5]-G[6-391.5/0.5]-N[3,4,5,6,8,10] |
| UPACA4H-[20-500/1]-[20-400/1]-[10,15,20]-F[6-491.5/0.5]-G[6-391.5/0.5]-Z[4,5,6,8] |
| UPACA6H-[20-500/1]-[20-400/1]-[10,15,20]-F[6-245.5/0.5]-G[6-391.5/0.5]-M[3,4,5,6,8,10] |
| UPACA6H-[20-500/1]-[20-400/1]-[10,15,20]-F[6-245.5/0.5]-G[6-391.5/0.5]-N[3,4,5,6,8,10] |
| UPACA6H-[20-500/1]-[20-400/1]-[10,15,20]-F[6-245.5/0.5]-G[6-391.5/0.5]-Z[4,5,6,8] |
| UPACA-[20-500/1]-[20-400/1]-[10,15,20] |
Loading...
More Information
[ ! ]Properties >> P.953
Basic Information
| Material | Ultra High-Molecular Polyethylene | Material | Ultra High-Molecular Polyethylene (UHPE) |
|---|
Specification/Dimensions
-
Grade
-
Color
- White
- Black
-
Hole Machining
-
A(mm)
-
B(mm)
-
Counterbored Hole Nominal Dia. [Z]
-
F(mm)
-
G(mm)
-
T(mm)
-
Threaded Insert Nominal Dia. [M]
-
Through Hole Nominal Dia. [N]
-
type
- UPA
- UPA#H
- UPACA
- UPACA#H
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 6 Days or Less
- 10 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Plastic Plates - PBT, Holes Optional
- G-10 Garolite Bar
- Plastic Film - Polymide
- Plastic Sheet -Nylon, 6/6, MDS-Filled
- Plastic Bar - ABS
- Plastic Bar and Plastic Sheet - Colored Polycarbonate
- Plastic Bar - Polycarbonate, Scratch & UV Resistant
- Plastic Bar - UHMW, Oil-Filled
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy