(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.

All Categories

Applications

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Need Help?

Order/Quote

Order

Order

/ Order
/ Order

Part Number Checker

Catalog Request

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.

Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Plastic Plates - MC Nylon, Holes Optional

MISUMI

If finish-machined, these plate become more convenient.

inCAD Components

(i)Caution

Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

・Materials

Type	[ M ]Grade / Material	Color	Operating Ambient Temperature
MCA	Standard / MC901	Blue	-40~120°C
MCA-G	Standard Thick Type / MC901	Blue
MCAW	Standard / MC900NC	Ivory
MCAS	Sliding / MC703HL	Purple
MCAY	High Strength / MC602ST	Dark Brown	Ambient Temp. ~ 150°C
MCAPS	Weather Resistance / MC801	Dark Gray	Ambient Temp. ~ 120°C
MCCA	Conductivity CDR2 / MC501CDR2	Black	Ambient Temp. ~ 120°C
MCDA	Antistatic CDR6 / MC501CDR6	Black	Ambient Temp. ~ 120°C
MCEA	Antistatic / Heat Resistant CDR9 / MC501CDR9	Black	Ambient Temp. ~ 150°C

Specifications

■Standard Type

	Part Number	-	A	-	B	-	T
Circular Sawing	MCA	-	300	-	200	-	40
Guaranteed Perpendicularity of Circular Sawing	MCANTQ	-	200.5	-	100.5	-	10
4-side Milling	MCA4FN	-	150.5	-	100.3	-	15
6-surface Milling	MCA6FMM	-	100.3	-	90.5	-	10.5
Upper-lower Surface Milling	MCA2FQ	-	80	-	50	-	5

■Pre-drilled Type

Part Number	-	A	-	B	-	T	-	F	-	G	-	Screw Nominal Dia.	-	L
MCDA4H MCDA4H	- -	200 500	- -	155 300	- -	5 10	- -	F160 F300	- -	G120 G200	- -	N4 M5	-	L7.5

• Dimension Tolerance of A and B

T	A, B	A, B Dimension Tolerance
T	Unit: mm	A, B Dimension Tolerance
5~30	~99	±0.5
	100~250	±0.75
	251~	±1.0
40~100	~300	0~+5

• T Dimension Tolerance, Rate of Camber and Torsion

T	T Dimension Tolerance	Rates of Camber and Torsion
T	T Dimension Tolerance	per 1,000mm
5, 7, 10	0~+1.5	1.2% or Less
12, 15, 20	0~+1.5	1.0% or Less
25, 30, 40	0~+2.0	0.4% or Less
50, 60	0~+3.5
70, 80, 90, 100	0~+5.0

•Precision Guarantee

Finish	Width Parallelism	Perpendicularity of Reference Plane
	per 100mm
Guaranteed Perpendicularity of Circular Sawing (NT)	0.1	0.1
4-side Milling (4F)
6-surface Milling (6F)

[ ! ] Reference plane stickers are attached to 4-side milled plates.

■ Standard Type

Part Number								Dimension Range by Material	A	B	T
Type		Finish Symbol	T Dimension Tolerance	A, B Dimension Tolerance
MCA MCA-G MCAW MCAS MCAY MCAPS MCCA MCDA MCEA	(Standard Blue) (Standard Thick Type) (Standard Ivory) (Sliding) (High Strength) (Weather Resistance) (Conductivity CDR2) (Antistatic CDR6) (Antistatic / Heat Resistant CDR9)	Circular Sawing							1mm Increment		Selection
		-	Not available	Not available				MCA	20~600	20~500	5, 7, 10, 12, 15, 20, 25, 30
									40~300	40~300	40, 50, 60
								MCA-G	301~500	301~500	40, 50, 60
									70~300	70~300	70, 80, 90, 100
								MCEA	20~600	20~500	10, 12, 15, 20, 25
								Others	20~600	20~500	5, 7, 10, 12, 15, 20, 25, 30
		Guaranteed Perpendicularity of Circular Sawing (NT)							0.5mm Increment		Selection
		NT	Not available		T5, 7, 10	T12, 15, 20	T25, 30	MCEA	20~500	20~400	10, 12, 15, 20, 25
				Q	0~+0.3	0~+0.4	0~+0.5	Others	20~500	20~400	5, 7, 10, 12, 15, 20, 25, 30
				N	±0.2	±0.3	±0.4
				M	-0.3~0	-0.4~0	-0.5~0
		4-side Milling (4F)							0.1mm Increment		Selection
		4F	Not available	Q 0~+0.2 N ±0.1 M -0.2~0				MCEA	10~400	10~200	10, 12, 15, 20, 25
								Others	10~400	10~200	5, 7, 10, 12, 15, 20, 25, 30
		6-surface Milling (6F)							0.1mm Increment		0.1mm Increment
		6F	Q 0~+0.2 N ±0.1 M -0.2~0	Q 0~+0.2 N ±0.1 M -0.2~0				MCEA	10~400	10~200	10~24
								Others	10~400	10~200	5~29
		Upper-lower Surface Milling (2F)							1mm Increment		0.1mm Increment
		2F	Q 0~+0.2 N ±0.1 M -0.2~0	Not available				MCEA	20~400	20~250	10~24
								Others	20~400	20~250	5~29

[ ! ] T40, 50 and 60 may have steps on cut surfaces.
[ ! ]If MCA-G, A≥B≥T

■Pre-drilled Type

Part Number				A	B	T Dimension Range by Material	T	F	G
Type		T Dimension Tolerance	Number of Holes
MCA MCAW MCAS MCAY MCAPS MCCA MCDA MCEA	(Standard Blue) (Standard Ivory) (Sliding) (High Strength) (Weather Resistance) (Conductivity CDR2) (Antistatic CDR6) (Antistatic / Heat Resistant CDR9)	Circular Sawing		1mm Increment			Selection	0.5mm Increment
		Not available	2H (Horizontal) 2HL (Vertical) 4H 6H	20~500	20~400	MCEA	10, 12, 15, 20, 25	6~491.5 (2H, 4H) 4.5~395.5 (2HL) 6~245.5 (6H)	4.5~395.5 (2H) 6~391.5 (2HL, 4H, 6H)
						Others	5, 7, 10, 12, 15, 20, 25, 30
		Upper-lower Surface Milling (2F)		1mm Increment			0.1mm Increment	0.5mm Increment
		2FQ 0~+0.22 2FN ±0.12 2FM -0.2~0	2H (Horizontal) 2HL (Vertical) 4H 6H	20~400	20~250	MCEA	10~24	6~391.5 (2H, 4H) 4.5~395.5 (2HL) 6~195.5 (6H)	4.5~245.5 (2H) 6~241.5 (2HL, 4H, 6H)
						Others	5~29

[ ! ]Dimension F Specification Range: For 2H and 4H, d(d₁)+2.5≤F≤A-d(d₁)-5; for 2HL, d(d₁)/2+2.5≤F≤A-d(d₁)/2-2.5; for 6H, d(d₁)+2.5≤F≤(A-d(d₁)-5)/2.
[ ! ]Dimension G Specification Range: For 2H, d(d₁)/2+2.5≤G≤B-d(d₁)/2-2.5; for 2HL, 4H and 6H, d(d₁)+2.5≤G≤B-d(d₁)-5.
[ ! ]For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).

T Dimension	Pre-drilled Hole Nominal Dia.
	Through Hole	Counterbore Hole					Threaded Insert
	N	Z					M						L
5~6	3 4 5 6 8 10	-					3	4					(Threaded Insert Length) Select from Table 1
7~9		3	4				3	4	5	6
10~14			4	5	6		3	4	5	6	8	10
15~30			4	5	6	8	3	4	5	6	8	10

Alterations

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
MCA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8]
MCA2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FM-[20-400/1]-[20-250/1]-[5-29/0.1]
MCA2FN2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FN2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FN2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FN2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FN2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FN2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8]
MCA2FN4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FN4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FN4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FN6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FN6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FN6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FN-[20-400/1]-[20-250/1]-[5-29/0.1]
MCA2FQ2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FQ2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FQ2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FQ2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FQ2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FQ2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8]
MCA2FQ4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FQ4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FQ4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FQ6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FQ6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FQ6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FQ-[20-400/1]-[20-250/1]-[5-29/0.1]
MCA2H-[20-500/1]-[20-400/1]-[5,7,10,12,15,20,25,30]-F[6-491.5/0.5]-G[4.5-395.5/0.5]-M[3,4,5,6,8,10]
MCA2H-[20-500/1]-[20-400/1]-[5,7,10,12,15,20,25,30]-F[6-491.5/0.5]-G[4.5-395.5/0.5]-N[3,4,5,6,8,10]
MCA2H-[20-500/1]-[20-400/1]-[5,7,10,12,15,20,25,30]-F[6-491.5/0.5]-G[4.5-395.5/0.5]-Z[3,4,5,6,8,10]
MCA2HL-[20-500/1]-[20-400/1]-[5,7,10,12,15,20,25,30]-F[4.5-395.5/0.5]-G[6-391.5/0.5]-M[3,4,5,6,8,10]
MCA2HL-[20-500/1]-[20-400/1]-[5,7,10,12,15,20,25,30]-F[4.5-395.5/0.5]-G[6-391.5/0.5]-N[3,4,5,6,8,10]
MCA2HL-[20-500/1]-[20-400/1]-[5,7,10,12,15,20,25,30]-F[4.5-395.5/0.5]-G[6-391.5/0.5]-Z[3,4,5,6,8]
MCA4FM-[10-400/0.1]-[10-200/0.1]-[5,7,10,12,15,20,25,30]
MCA4FN-[10-400/0.1]-[10-200/0.1]-[5,7,10,12,15,20,25,30]
MCA4FQ-[10-400/0.1]-[10-200/0.1]-[5,7,10,12,15,20,25,30]
MCA4H-[20-500/1]-[20-400/1]-[5,7,10,12,15,20,25,30]-F[6-491.5/0.5]-G[6-391.5/0.5]-M[3,4,5,6,8,10]
MCA4H-[20-500/1]-[20-400/1]-[5,7,10,12,15,20,25,30]-F[6-491.5/0.5]-G[6-391.5/0.5]-N[3,4,5,6,8,10]
MCA4H-[20-500/1]-[20-400/1]-[5,7,10,12,15,20,25,30]-F[6-491.5/0.5]-G[6-391.5/0.5]-Z[3,4,5,6,8,10]
MCA6FMM-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FMN-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FMQ-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FNM-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FNN-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FNQ-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FQM-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FQN-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FQQ-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]

Minimum order quantity	Days to Ship	RoHS	Grade	Color	Hole Machining	Finishing Method	T Dimension Tolerance	AB Dimension Tolerance	Material	A (mm)	B (mm)	Counterbored Hole Nominal Dia. [Z]	F (mm)	G (mm)	T (mm)	Threaded Insert Nominal Dia. [M]	Through Hole Nominal Dia. [N]
1 Piece(s)	10 Days or more	10	Standard	Blue	2H	Upper-lower Surface Milled	M(0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	4.5 ～ 245.5	5 ～ 29	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Blue	2H	Upper-lower Surface Milled	M(0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	4.5 ～ 245.5	5 ～ 29	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Blue	2H	Upper-lower Surface Milled	M(0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 391.5	4.5 ～ 245.5	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	2HL	Upper-lower Surface Milled	M(0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	-	4.5 ～ 395.5	6 ～ 245.5	5 ～ 29	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Blue	2HL	Upper-lower Surface Milled	M(0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	-	4.5 ～ 395.5	6 ～ 245.5	5 ～ 29	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Blue	2HL	Upper-lower Surface Milled	M(0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 8	4.5 ～ 395.5	6 ～ 245.5	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	4H	Upper-lower Surface Milled	M(0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	6 ～ 245.5	5 ～ 29	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Blue	4H	Upper-lower Surface Milled	M(0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	6 ～ 245.5	5 ～ 29	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Blue	4H	Upper-lower Surface Milled	M(0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 391.5	6 ～ 245.5	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	6H	Upper-lower Surface Milled	M(0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 195.5	6 ～ 245.5	5 ～ 29	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Blue	6H	Upper-lower Surface Milled	M(0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 195.5	6 ～ 245.5	5 ～ 29	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Blue	6H	Upper-lower Surface Milled	M(0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 195.5	6 ～ 245.5	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	No Drilling Alteration	Upper-lower Surface Milled	M(0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	-	-	-	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	2H	Upper-lower Surface Milled	N(±0.1)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	4.5 ～ 245.5	5 ～ 29	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Blue	2H	Upper-lower Surface Milled	N(±0.1)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	4.5 ～ 245.5	5 ～ 29	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Blue	2H	Upper-lower Surface Milled	N(±0.1)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 391.5	4.5 ～ 245.5	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	2HL	Upper-lower Surface Milled	N(±0.1)	-	MC901	20 ～ 400	20 ～ 250	-	4.5 ～ 395.5	6 ～ 245.5	5 ～ 29	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Blue	2HL	Upper-lower Surface Milled	N(±0.1)	-	MC901	20 ～ 400	20 ～ 250	-	4.5 ～ 395.5	6 ～ 245.5	5 ～ 29	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Blue	2HL	Upper-lower Surface Milled	N(±0.1)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 8	4.5 ～ 395.5	6 ～ 245.5	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	4H	Upper-lower Surface Milled	N(±0.1)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	6 ～ 245.5	5 ～ 29	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Blue	4H	Upper-lower Surface Milled	N(±0.1)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	6 ～ 245.5	5 ～ 29	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Blue	4H	Upper-lower Surface Milled	N(±0.1)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 391.5	6 ～ 245.5	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	6H	Upper-lower Surface Milled	N(±0.1)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 195.5	6 ～ 245.5	5 ～ 29	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Blue	6H	Upper-lower Surface Milled	N(±0.1)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 195.5	6 ～ 245.5	5 ～ 29	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Blue	6H	Upper-lower Surface Milled	N(±0.1)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 195.5	6 ～ 245.5	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	No Drilling Alteration	Upper-lower Surface Milled	N(±0.1)	-	MC901	20 ～ 400	20 ～ 250	-	-	-	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	2H	Upper-lower Surface Milled	Q(+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	4.5 ～ 245.5	5 ～ 29	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Blue	2H	Upper-lower Surface Milled	Q(+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	4.5 ～ 245.5	5 ～ 29	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Blue	2H	Upper-lower Surface Milled	Q(+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 391.5	4.5 ～ 245.5	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	2HL	Upper-lower Surface Milled	Q(+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	-	4.5 ～ 395.5	6 ～ 245.5	5 ～ 29	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Blue	2HL	Upper-lower Surface Milled	Q(+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	-	4.5 ～ 395.5	6 ～ 245.5	5 ～ 29	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Blue	2HL	Upper-lower Surface Milled	Q(+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 8	4.5 ～ 395.5	6 ～ 245.5	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	4H	Upper-lower Surface Milled	Q(+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	6 ～ 245.5	5 ～ 29	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Blue	4H	Upper-lower Surface Milled	Q(+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	6 ～ 245.5	5 ～ 29	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Blue	4H	Upper-lower Surface Milled	Q(+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 391.5	6 ～ 245.5	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	6H	Upper-lower Surface Milled	Q(+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 195.5	6 ～ 245.5	5 ～ 29	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Blue	6H	Upper-lower Surface Milled	Q(+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 195.5	6 ～ 245.5	5 ～ 29	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Blue	6H	Upper-lower Surface Milled	Q(+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 195.5	6 ～ 245.5	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	No Drilling Alteration	Upper-lower Surface Milled	Q(+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	-	-	-	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	2H	Circular Sawing	-	-	MC901	20 ～ 500	20 ～ 400	-	6 ～ 491.5	4.5 ～ 395.5	5 ～ 30	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Blue	2H	Circular Sawing	-	-	MC901	20 ～ 500	20 ～ 400	-	6 ～ 491.5	4.5 ～ 395.5	5 ～ 30	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Blue	2H	Circular Sawing	-	-	MC901	20 ～ 500	20 ～ 400	3 ～ 10	6 ～ 491.5	4.5 ～ 395.5	5 ～ 30	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	2HL	Circular Sawing	-	-	MC901	20 ～ 500	20 ～ 400	-	4.5 ～ 395.5	6 ～ 391.5	5 ～ 30	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Blue	2HL	Circular Sawing	-	-	MC901	20 ～ 500	20 ～ 400	-	4.5 ～ 395.5	6 ～ 391.5	5 ～ 30	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Blue	2HL	Circular Sawing	-	-	MC901	20 ～ 500	20 ～ 400	3 ～ 8	4.5 ～ 395.5	6 ～ 391.5	5 ～ 30	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	No Drilling Alteration	4-Side Milled	-	M(0/-0.2)	MC901	10 ～ 400	10 ～ 200	-	-	-	5 ～ 30	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	No Drilling Alteration	4-Side Milled	-	N(±0.1)	MC901	10 ～ 400	10 ～ 200	-	-	-	5 ～ 30	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	No Drilling Alteration	4-Side Milled	-	Q(+0.2/0)	MC901	10 ～ 400	10 ～ 200	-	-	-	5 ～ 30	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	4H	Circular Sawing	-	-	MC901	20 ～ 500	20 ～ 400	-	6 ～ 491.5	6 ～ 391.5	5 ～ 30	3 ～ 10	-
1 Piece(s)	10 Days or more	10	Standard	Blue	4H	Circular Sawing	-	-	MC901	20 ～ 500	20 ～ 400	-	6 ～ 491.5	6 ～ 391.5	5 ～ 30	-	3 ～ 10
1 Piece(s)	10 Days or more	10	Standard	Blue	4H	Circular Sawing	-	-	MC901	20 ～ 500	20 ～ 400	3 ～ 10	6 ～ 491.5	6 ～ 391.5	5 ～ 30	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	No Drilling Alteration	6-surface Milled	M(0/-0.2)	M(0/-0.2)	MC901	10 ～ 400	10 ～ 200	-	-	-	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	No Drilling Alteration	6-surface Milled	M(0/-0.2)	N(±0.1)	MC901	10 ～ 400	10 ～ 200	-	-	-	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	No Drilling Alteration	6-surface Milled	M(0/-0.2)	Q(+0.2/0)	MC901	10 ～ 400	10 ～ 200	-	-	-	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	No Drilling Alteration	6-surface Milled	N(±0.1)	M(0/-0.2)	MC901	10 ～ 400	10 ～ 200	-	-	-	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	No Drilling Alteration	6-surface Milled	N(±0.1)	N(±0.1)	MC901	10 ～ 400	10 ～ 200	-	-	-	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	No Drilling Alteration	6-surface Milled	N(±0.1)	Q(+0.2/0)	MC901	10 ～ 400	10 ～ 200	-	-	-	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	No Drilling Alteration	6-surface Milled	Q(+0.2/0)	M(0/-0.2)	MC901	10 ～ 400	10 ～ 200	-	-	-	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	No Drilling Alteration	6-surface Milled	Q(+0.2/0)	N(±0.1)	MC901	10 ～ 400	10 ～ 200	-	-	-	5 ～ 29	-	-
1 Piece(s)	10 Days or more	10	Standard	Blue	No Drilling Alteration	6-surface Milled	Q(+0.2/0)	Q(+0.2/0)	MC901	10 ～ 400	10 ～ 200	-	-	-	5 ～ 29	-	-

1
2
3
4
5
Next >>

More Information

[ ! ]Properties >>P.953

[ ! ]For Plastic Blocks, see P.1024.

Product TOP

Basic Information

Material	MC Nylon

Configure

537 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Grade
Standard

Conductive

Antistatic

Sliding

High Strength

Weather Resistant

Antistatic / Heat-Resistant
Clear
Color
- Blue
- Ivory
- Black
- Purple
- Black Gray
- Dark Brown
Clear
Hole Machining
No Drilling Alteration

2H

2HL

4H

6H
Clear
Finishing Method
- 4-Side Milled
- 6-surface Milled
- Circular Sawing
- Guaranteed Perpendicularity of Circular Sawing
- Upper-lower Surface Milled
Clear
T Dimension Tolerance
- M(0/-0.2)
- N(±0.1)
- Q(+0.2/0)
Clear
AB Dimension Tolerance
- M(0/-0.2)
- N(±0.1)
- Q(+0.2/0)
Clear
Material
MC501CDR2

MC501CDR6

MC501CDR9

MC602ST

MC703HL

Weather Resistant (MC801)

MC900NC

MC901
Clear
A(mm)
[10-400/0.1mm Unit(s)][20-500/0.5mm Unit(s)][20-500/1mm Unit(s)]
Clear
B(mm)
[10-200/0.1mm Unit(s)][20-400/0.5mm Unit(s)][20-500/1mm Unit(s)]
Clear
Counterbored Hole Nominal Dia. [Z]
3

4

5

6

8

10
Clear
F(mm)
[4.5-491.5/0.5mm Unit(s)]
Clear
G(mm)
[4.5-395.5/0.5mm Unit(s)]
Clear
T(mm)
5

7

10

12

15

20

25

30

40

50

60

70

80

90

100
[5-29/0.1mm Unit(s)]
Clear
Threaded Insert Nominal Dia. [M]
3

4

5

6

8

10
Clear
Through Hole Nominal Dia. [N]
3

4

5

6

8

10
Clear
type
- MCA
- MCA#H
- MCA-G
- MCA2F#
- MCA2F##H
- MCA4F#
- MCA6F##
- MCANT#
- MCAPS
- MCAPS2F#
- MCAPS2F##H
- MCAPS2H
- MCAPS2HL
- MCAPS4F#
- MCAPS4H
- MCAPS6F##
- MCAPS6H
- MCAPSNT#
- MCAS
- MCAS#H
- MCAS2F#
- MCAS2F##H
- MCAS4F#
- MCAS6F##
- MCASNT#
- MCAW
- MCAW#H
- MCAW2F#
- MCAW2F##H
- MCAW4F#
- MCAW6F##
- MCAWNT#
- MCAY
- MCAY#H
- MCAY2F#
- MCAY2F##H
- MCAY4F#
- MCAY6F##
- MCAYNT#
- MCCA
- MCCA#H
- MCCA2F#
- MCCA2F##H
- MCCA4F#
- MCCA6F##
- MCCANT#
- MCDA
- MCDA#H
- MCDA2F#
- MCDA2F##H
- MCDA4F#
- MCDA6F##
- MCDANT#
- MCEA
- MCEA#H
- MCEA2F#
- MCEA2F##H
- MCEA4F#
- MCEA6F##
- MCEANT#
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Days or Less

10 Days or Less

12 Days or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Hex Socket Cap Screw - M4 - M10, Coarse, Configurable Length, Partially Threaded
MISUMI Days to Ship : 9 Days or more
Washers - Sponge
MISUMI Days to Ship : 8 Days or more
Bumpers - Urethane & Rubber, Threaded, Standard & Configurable
MISUMI Days to Ship : 8 Days or more

Tech Support

Technical Support: Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com; Mon. - Fri. 8 a.m. - 6 p.m.; Technical Inquiry

Top of the page

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information: Contact Us

Inquiry Format

All Categories

Categories

Applications

Brands

How can we improve?

Plastic Plates - MC Nylon, Holes Optional

(i)Caution

Specifications

Alterations

Part Number

More Information

Basic Information

Configure

Specification/Dimensions

Grade

Color

Hole Machining

Finishing Method

T Dimension Tolerance

AB Dimension Tolerance

Material

A(mm)

B(mm)

Counterbored Hole Nominal Dia. [Z]

F(mm)

G(mm)

T(mm)

Threaded Insert Nominal Dia. [M]

Through Hole Nominal Dia. [N]

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Tech Support

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)