(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 p.m. 11/23/2024 to 5:00 p.m. (CST) 11/24/2024. We apologize for the inconvenience.
Socket Head Cap Screws - Titanium
- Volume Discount
•Shape: Standard
•Sale Unit: Individually Sold (Min. 1 pc)
•Application: Standard
•Mounting Hole Shape: Hex Socket
•Shape: Standard
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
| Type | [ M ] Material | [ S ] Surface Treatment |
| CBT | Pure Titanium Class 2 (JIS H4650) | - |
| CBAL | 2017 Aluminum Alloy | - |
| CBALB | Black Anodize |
Specifications
| Part Number |
| CBT5-12 |
■Hex Socket Head Cap Screws
| Part Number | M x P | A | E | B | Compliance with Standard | ||||
| CBT | CBAL | CBALB | |||||||
| Type | M-L | ||||||||
| CBT CBAL CBALB | 3- | 6 | 3x0.5 | 5.5 | 3 | 2.5 | ● | ● | - |
| 8 | 3x0.5 | 5.5 | 3 | 2.5 | ● | ● | ● | ||
| 10 | 3x0.5 | 5.5 | 3 | 2.5 | ● | ● | ● | ||
| 12 | 3x0.5 | 5.5 | 3 | 2.5 | ● | ● | ● | ||
| 15 | 3x0.5 | 5.5 | 3 | 2.5 | ● | ● | ● | ||
| 20 | 3x0.5 | 5.5 | 3 | 2.5 | ● | ● | ● | ||
| 4- | 6 | 4x0.7 | 7 | 4 | 3 | - | ● | - | |
| 8 | 4x0.7 | 7 | 4 | 3 | ● | ● | - | ||
| 10 | 4x0.7 | 7 | 4 | 3 | ● | ● | ● | ||
| 12 | 4x0.7 | 7 | 4 | 3 | ● | ● | ● | ||
| 15 | 4x0.7 | 7 | 4 | 3 | ● | ● | ● | ||
| 20 | 4x0.7 | 7 | 4 | 3 | ● | ● | ● | ||
| 5- | 8 | 5x0.8 | 8.5 | 5 | 4 | ● | ● | - | |
| 10 | 5x0.8 | 8.5 | 5 | 4 | ● | ● | ● | ||
| 12 | 5x0.8 | 8.5 | 5 | 4 | ● | ● | ● | ||
| 15 | 5x0.8 | 8.5 | 5 | 4 | ● | ● | ● | ||
| 20 | 5x0.8 | 8.5 | 5 | 4 | ● | ● | ● | ||
| 25 | 5x0.8 | 8.5 | 5 | 4 | ● | ● | ● | ||
| 6- | 8 | 6x1.0 | 10 | 6 | 5 | - | ● | - | |
| 10 | 6x1.0 | 10 | 6 | 5 | ● | ● | ● | ||
| 12 | 6x1.0 | 10 | 6 | 5 | ● | ● | ● | ||
| 15 | 6x1.0 | 10 | 6 | 5 | ● | ● | ● | ||
| 20 | 6x1.0 | 10 | 6 | 5 | ● | ● | ● | ||
| 25 | 6x1.0 | 10 | 6 | 5 | ● | ● | ● | ||
| 8- | 15 | 8x1.25 | 13 | 8 | 6 | ● | ● | ● | |
| 20 | 8x1.25 | 13 | 8 | 6 | ● | ● | ● | ||
| 25 | 8x1.25 | 13 | 8 | 6 | ● | ● | ● | ||
| 30 | 8x1.25 | 13 | 8 | 6 | ● | ● | ● | ||
| 10- | 20 | 10x1.5 | 16 | 10 | 8 | ● | ● | - | |
| 25 | 10x1.5 | 16 | 10 | 8 | ● | ● | - | ||
| 30 | 10x1.5 | 16 | 10 | 8 | ● | ● | - | ||
| 35 | 10x1.5 | 16 | 10 | 8 | ● | ● | - | ||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Loading...
More Information
Characteristics of Titanium (JIS H4650 Pure Titanium Class 2)
• Strength of titanium is comparable to low-carbon steel, yet the specific gravity is 60% of steel.
• It can be used in low to high temperatures.
• It has better chemical resistance than that of stainless steel.
■Typical Physical Properties of Titanium
■Chemical Resistance of Titanium
◎: Corrosion resistant enough for use.
○: Corrosive but usable depending on conditions.
×: Unusable due to insufficient corrosion resistance.
■Changes in Mechanical Characteristics of Titanium by Temperature
• Strength of titanium is comparable to low-carbon steel, yet the specific gravity is 60% of steel.
• It can be used in low to high temperatures.
• It has better chemical resistance than that of stainless steel.
■Typical Physical Properties of Titanium
| Item | Unit | Data |
| Purity | % | 99.5 or More |
| Tensile Strength | N/mm2 | 340~510 |
| Yield Stress | N/mm2 | 215 or More |
| Operating Temp. | °C | -200~350 |
■Chemical Resistance of Titanium
| Chemical Solution | Concentration (%) | Temperature (°C) | Titanium | 316 Stainless Steel |
| Hydrochloric Acid | 10 | 30 | ◎ | × |
| Sulfuric Acid | 20 | 30 | ○ | × |
| Sodium Hydroxide | 50 | 120 | ◎ | ○ |
○: Corrosive but usable depending on conditions.
×: Unusable due to insufficient corrosion resistance.
■Changes in Mechanical Characteristics of Titanium by Temperature
| Item | Unit | Data | ||
| -200°C | Ambient Temperature | 350°C | ||
| Tensile Strength | N/mm2 | 994 | 421 | 167 |
| Elongation | % | 25.7 | 46 | 54 |
■Comparison by Metals
■Mechanical Characteristics of Hex Socket Cap Screws (Reference)
• Values shown in tables are reference, and not guaranteed.
• Recommended tightening torque is 50% of torsional breaking torque.
• Use torque driver or torque wrench for tightening.
• Values of black anodized products are approx. 80% of values above.
| Item | Unit | Titanium | Aluminum | Steel |
| Specific Gravity | g/cm3 | 4.5 | 2.7 | 7.9 |
| Tensile Strength | N/mm2 | 377 | 78 | 315 |
| Thermal Conductivity | cal/cm • sec • °C | 0.041 | 0.487 | 0.145 |
| Young's Modulus | kN/mm2 | 106 | 69 | 205 |
■Mechanical Characteristics of Hex Socket Cap Screws (Reference)
| Tensile Breaking Load N | Torsional Breaking Torque N • m | |||
| Titanium | Aluminum | Titanium | Aluminum | |
| M3 | 3210 | 1650 | 2.4 | 1.0 |
| M4 | 5610 | 2890 | 4.7 | 2.5 |
| M5 | 9080 | 4680 | 9.8 | 6.7 |
| M6 | 12800 | 6630 | 11.3 | 11.0 |
| M8 | 23400 | 12000 | 22.8 | 30.0 |
| M10 | 37100 | 23560 | 61.5 | 48.0 |
• Recommended tightening torque is 50% of torsional breaking torque.
• Use torque driver or torque wrench for tightening.
• Values of black anodized products are approx. 80% of values above.
Basic Information
| Mounting Hole Shape | Hex Socket | Basic Shape | Standard | Additional Shapes | Standard |
|---|---|---|---|---|---|
| Sales Unit | Individucally Sold (Min. 1 pc) | Application | Standard |
Stock
-
- Stock Item Only
Specification/Dimensions
-
Nominal of Thread (M)
-
Length L (mm)
-
Material
- Aluminum
- Titanium
- Aluminum
-
Surface Treatment
- No
- Black Anodize
- No
-
type
- CBAL
- CBALB
- CBT
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 8 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Socket Head Cap Screws - Fine Thread
- Hex Socket Cap Screw - Stainless Steel, Black Chromate Plating, M3 - M10, Coarse
- Hex Socket Cap Screw - Stainless Steel, Fluoropolymer Finish, M3 - M10, Coarse, SNSS-TF Series
- Hex Socket Cap Screw - M1.4 - M42, Multiple Material Options, Multiple Finish Options, Coarse
- Hex Socket Cap Screw - 316L Stainless Steel, 10.9 Class, M6 - M12, Coarse, High-Strength
- Hex Socket Cap Screw - Steel, Trivalent Chromate Plating, M3 - M6, Coarse, Multi-Length Assortment
- Hex Socket Cap Screw - 316L Stainless Steel, M3 - M10, Coarse, Clean Bolt
- Hex Socket Cap Screw - Steel, Black Oxide Finish, M3 - M6, Coarse, K-P Series
Complementary Products
-
Hex Socket Cap Screw - M4 - M10, Coarse, Configurable Length, Partially Threaded
MISUMI Days to Ship : 9 Days or more
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy