(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Rubber Heaters - Square, with Thermostat
Click this image to zoom it.
Move the mouse over the image to zoom
•Application: For Metal and Mold Heating
•Category: Heater Main Body
•Usage Pattern: Individual Item
•Category Single Body: Silicon Rubber Heaters
•Maximum Operating Temperature (°c): 220
- inCAD Components
Part Number
Configured Part Number is shown.
MRHSSB-[120-500/1]-[80-400/1]-V[100,200]-W[10-1000/10]-S[80,120,150,180]
■Lead Wire Retaining Sheet Dimensions
Dimensions in ( ) are reference values.
| Type | Current Value A | C | D | E |
| MRHSSB | Less than 5A | (25) | (40) | (33) |
| 5 A to less than 8 A | (40) | (40) | (18) | |
| 8A~10A | (40) | (100) | (18) |
・Materials
[ M ] Material
Heater : Silicon Rubber
Lead Wire : Nickel (Ni)
Lead Wire Film: fluoropolymer
· Thermostats
Heater : Ceramic (Steatite Type)
Cap : Aluminum
Bimetal: Disk Bimetal
[ M ] Material
Heater : Silicon Rubber
Lead Wire : Nickel (Ni)
Lead Wire Film: fluoropolymer
· Thermostats
Heater : Ceramic (Steatite Type)
Cap : Aluminum
Bimetal: Disk Bimetal
Specifications
| Part Number | - | A | - | B | - | V | - | W | - | S |
| MRHSSB | - | 200 | - | 200 | - | V200 | - | W80 | - | S120 |
■Thermostat Operating Temperature Rating
· It energizes (NC) when the power is turned on and the contact point shuts off when it reaches to the operation temperature rate (OFF) and electricity is turned off. It automatically recovers when it is below the rated operating temperature.
(Ex.) When at thermostat operation temperature (°C) 80, contact point shuts off at (80±5)°C after electricity is supplied. It will automatically recover when it becomes (65±8)°C. In temperature adjustment, set it lower than the temperature of OFF point tolerance
(In case of 80°C: 80-5=75°C or less).
| S Thermostats Operating Temperature (°C) | OFF Point | ON Point |
| 80 | (80±5)°C | (65±8)°C |
| 120 | (120±6)°C | (100±10)°C |
| 150 | (150±6)°C | (125±15)°C |
| 180 | (180±8)°C | (140±15)°C |
(Ex.) When at thermostat operation temperature (°C) 80, contact point shuts off at (80±5)°C after electricity is supplied. It will automatically recover when it becomes (65±8)°C. In temperature adjustment, set it lower than the temperature of OFF point tolerance
(In case of 80°C: 80-5=75°C or less).
■Rubber Heaters Square (with Thermostat)
| Part Number | 1mm Increment | V (Voltage) | W (Electric Power) 10W Increment | S (Thermostat Operating Temperature) (°C) | Electrical Power Density (W/cm2) | |
| Type | A | B | ||||
| MRHSSB | 120~500 | 80~400 | 100 200 | 10~1000 | 80 120 150 180 | 0.2≤W/cm2≤0.8 [ ! ]W/cm2=W/(AB/100) |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Loading...
More Information
■Feature
· The bimetal thermostat with automatic recovery system prevents overheating of rubber heaters.
(Features of Thermostats)
Principle of Operation: Bimetal Non-energizing Type Single Pole Single Throw Operating Temperature One Point Fixed Type
Operating Method: OFF when temperature rises, and ON when temperature drops
(Electric Rating)
Resistance Load AC125V / 10A AC250V / 5.0A (Minimum Current: 0.1 A)
(Contact Resistance)
50mΩ or less according to minute current ohmmeter (DC6V/0.1A) (Initial Value)
(Insulation Resistance)
10MΩ or more with DC500V mega in the charge part and non-charge part
(Insulation Resistance)
AC1500V/min or AC1800V/sec in the charge part and non-charge part (Leakage Current: 10mA)
(ON/OFF life span)
The thermal ON/OFF operation is done approx. 10,000 times or less at the load of rated current and voltage.
Insulation Resistance: 50MΩ; Contact resistance: 100mΩ or less
· The bimetal thermostat with automatic recovery system prevents overheating of rubber heaters.
(Features of Thermostats)
Principle of Operation: Bimetal Non-energizing Type Single Pole Single Throw Operating Temperature One Point Fixed Type
Operating Method: OFF when temperature rises, and ON when temperature drops
(Electric Rating)
Resistance Load AC125V / 10A AC250V / 5.0A (Minimum Current: 0.1 A)
(Contact Resistance)
50mΩ or less according to minute current ohmmeter (DC6V/0.1A) (Initial Value)
(Insulation Resistance)
10MΩ or more with DC500V mega in the charge part and non-charge part
(Insulation Resistance)
AC1500V/min or AC1800V/sec in the charge part and non-charge part (Leakage Current: 10mA)
(ON/OFF life span)
The thermal ON/OFF operation is done approx. 10,000 times or less at the load of rated current and voltage.
Insulation Resistance: 50MΩ; Contact resistance: 100mΩ or less
■How to Mount
Apply Rubber Heater (left-hand page) and attach to the heated object. Click here
■Precautions for Use
[ ! ]The thermostat should not be used for temperature adjustment. Please use it as overheat protector.
[ ! ]Do not apply force to thermostat.
[ ! ]There are temperature gaps (about 10~40°C) between thermostat operating temperature and heater surface temperature, and between thermostat and heated object. Please check before actual use.
[ ! ]A part of upper terminal of thermostat is exposed. Please pay attention to short circuit.
[ ! ]Do not use it in flammable atmospheres.
[ ! ]To avoid burn injury, do not touch the heater when the power supply is on or immediately after use.
Apply Rubber Heater (left-hand page) and attach to the heated object. Click here
■Precautions for Use
[ ! ]The thermostat should not be used for temperature adjustment. Please use it as overheat protector.
[ ! ]Do not apply force to thermostat.
[ ! ]There are temperature gaps (about 10~40°C) between thermostat operating temperature and heater surface temperature, and between thermostat and heated object. Please check before actual use.
[ ! ]A part of upper terminal of thermostat is exposed. Please pay attention to short circuit.
[ ! ]Do not use it in flammable atmospheres.
[ ! ]To avoid burn injury, do not touch the heater when the power supply is on or immediately after use.
Basic Information
| Category | Heater Main Body | Maximum Operating Temperature(°C) | 220 | Rubber Heater Shape | Square |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Adhesives for Rubber Heater
- Cord Heaters - Copper
- Band Heaters
- Rubber Heaters - Square
- Rubber Heaters - Circular, with Thermostat
- Sheathed Heaters for Liquid Heating - U-Shaped / M-Shaped
- Ribbon Heaters
- Rubber Heaters - Square Both Side Flat Type
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy