(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Rotary Shafts - With keyways.
- Lead Time Reduction
New diameter sizes (13, 16, 17, 18 and 22) are added for h9 tolerance types. [3/31/23]
Straight Rotary Shafts with Key Grooves are available in 1045 Carbon Steel and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide, and Electroless Nickel Plating or No Surface Treatment.
[Diameter range] 6mm - 35mm
[Length range]15mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.
- METRIC
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
| Type | D Tolerance | [ M ]Material | [ S ]Surface Treatment | |
| ① | NSFMKR | h9 (Cold-drawn) | 1045 Carbon Steel | - |
| SFMKR | Black Oxide | |||
| PSFMKR | Electroless Nickel Plating | |||
| SSFMKR | 304 Stainless Steel | - | ||
| ② | NSFHKR | h7 (Ground) | 1045 Carbon Steel | - |
| SFHKR | Black Oxide | |||
| PSFHKR | Electroless Nickel Plating | |||
| SSFHKR | 304 Stainless Steel | - | ||
| ③ | NSFGKR | g6 (Ground) | 1045 Carbon Steel | - |
| SFGKR | Black Oxide | |||
| PSFGKR | Electroless Nickel Plating | |||
| SSFGKR | 304 Stainless Steel | - | ||
Specifications
| Part Number | - | L | - | Keyway ① | - | Keyway ② | - | Keyway ③ | |||||||
| KA | - | A | KB | - | B | KC | - | C | |||||||
| 1 Keyway 2 Keyways 3 Keyways | SFMKR10 SFHKR30 SFGKR25 | - - - | 325 330 350 | - - - | KA20 KA20 KA10 | - - - | A50 A50 A10 | - - | KB120 KB90 | - - | B20 B30 | - | KC210 | - | C30 |
①h9 (Cold-drawn)
②h7 (Ground)
③g6 (Ground)
| Part Number | L=0.1mm Increment | Keyway ① | Keyway ② | Keyway ③ | ||
| Type | Dh9 | KA, A | KB, B | KC, C | ||
| Tolerance | 1mm Increment | |||||
| NSFMKR SFMKR PSFMKR SSFMKR (D6 is not available for SSFMKR.) | 6 | 0 -0.030 | 15.0~400.0 | KA+A≤L KA≥0 b≤A≤100 | KB+B≤L KB≥0 b≤B≤100 | KC+C≤L KC≥0 b≤C≤100 |
| 8 | 0 -0.036 | 15.0~500.0 | ||||
| 10 | 15.0~600.0 | |||||
| 12 | 0 -0.043 | 15.0~700.0 | ||||
| 15 | 15.0~800.0 | |||||
| 20 | 0 -0.052 | 30.0~1000.0 | ||||
| 25 | 50.0~1000.0 | |||||
| 30 | 60.0~1000.0 | |||||
| 35 | 0 -0.062 | 70.0~1000.0 | ||||
| Part Number | L=0.1mm Increment | Keyway ① | Keyway ② | Keyway ③ | ||
| Type | Dh7 | KA, A | KB, B | KC, C | ||
| Tolerance | 1mm Increment | |||||
| NSFHKR SFHKR PSFHKR SSFHKR | 6 | 0 -0.012 | 15.0~400.0 | KA+A≤L KA≥0 b≤A≤100 | KB+B≤L KB≥0 b≤B≤100 | KC+C≤L KC≥0 b≤C≤100 |
| 8 | 0 0.015 | 15.0~500.0 | ||||
| 10 | 15.0~600.0 | |||||
| 12 | 0 -0.018 | 15.0~700.0 | ||||
| 15 | 15.0~800.0 | |||||
| 17 | 30.0~900.0 | |||||
| 20 | 0 -0.021 | 30.0~1000.0 | ||||
| 25 | 50.0~1000.0 | |||||
| 30 | 60.0~1000.0 | |||||
| 35 | 0 -0.025 | 70.0~1000.0 | ||||
| 40 | 80.0~1000.0 | |||||
| 50 | 100.0~1000.0 | |||||
| Part Number | L=0.1mm Increment | Keyway ① | Keyway ② | Keyway ③ | |||
| Type | Dg6 | KA, A | KB, B | KC, C | |||
| Tolerance | 1mm Increment | ||||||
| NSFGKR SFGKR PSFGKR SSFGKR (D13, 16, 18 and 22 are not available for SSFGKR.) | 6 | -0.004 -0.012 | 15.0~400.0 | KA+A≤L KA≥0 b≤A≤100 | KB+B≤L KB≥0 b≤B≤100 | KC+C≤L KC≥0 b≤C≤100 | |
| 8 | -0.005 -0.014 | 15.0~500.0 | |||||
| 10 | 15.0~600.0 | ||||||
| 12 | -0.006 -0.017 | 15.0~700.0 | |||||
| 13 | 15.0~700.0 | ||||||
| 15 | 15.0~800.0 | ||||||
| 16 | 15.0~900.0 | ||||||
| 17 | 30.0~900.0 | ||||||
| 18 | 30.0~900.0 | ||||||
| 20 | -0.007 -0.020 | 30.0~1000.0 | |||||
| 22 | 40.0~1000.0 | ||||||
| 25 | 50.0~1000.0 | ||||||
| 30 | 60.0~1000.0 | ||||||
| 35 | -0.009 -0.025 | 70.0~1000.0 | |||||
| 40 | 80.0~1000.0 | ||||||
| 50 | 100.0~1000.0 | ||||||
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| PSFGKR6-[20-300/0.1]-KA[0-298/1]-A[2-100/1] |
| PSFGKR8-[20-400/0.1]-KA[0-397/1]-A[3-100/1] |
| PSFGKR10-[20-500/0.1]-KA[0-497/1]-A[3-100/1] |
| PSFGKR12-[30-600/0.1]-KA[0-596/1]-A[4-100/1] |
| PSFGKR13-[30-600/0.1]-KA[0-595/1]-A[5-100/1] |
| PSFGKR15-[30-700/0.1]-KA[0-695/1]-A[5-100/1] |
| PSFGKR16-[30-800/0.1]-KA[0-795/1]-A[5-100/1] |
| PSFGKR17-[40-800/0.1]-KA[0-795/1]-A[5-100/1] |
| PSFGKR18-[40-800/0.1]-KA[0-794/1]-A[6-100/1] |
| PSFGKR20-[40-800/0.1]-KA[0-794/1]-A[6-100/1] |
| PSFGKR22-[40-800/0.1]-KA[0-794/1]-A[6-100/1] |
| PSFGKR25-[50-800/0.1]-KA[0-792/1]-A[8-100/1] |
| PSFGKR30-[60-800/0.1]-KA[0-792/1]-A[8-100/1] |
| PSFGKR35-[70-800/0.1]-KA[0-790/1]-A[10-100/1] |
| PSFGKR40-[80-800/0.1]-KA[0-788/1]-A[12-100/1] |
| PSFGKR50-[100-800/0.1]-KA[0-786/1]-A[14-100/1] |
| PSFHKR6-[15-400/0.1]-KA[0-400/0.1]-A[2-150/0.1] |
| PSFHKR8-[15-500/0.1]-KA[0-500/0.1]-A[3-150/0.1] |
| PSFHKR10-[15-600/0.1]-KA[0-600/0.1]-A[3-150/0.1] |
| PSFHKR12-[15-700/0.1]-KA[0-700/0.1]-A[4-150/0.1] |
| PSFHKR15-[15-800/0.1]-KA[0-800/0.1]-A[5-150/0.1] |
| PSFHKR17-[30-900/0.1]-KA[0-900/0.1]-A[5-100/0.1] |
| PSFHKR20-[30-1000/0.1]-KA[0-1000/0.1]-A[6-150/0.1] |
| PSFHKR25-[50-1000/0.1]-KA[0-1000/0.1]-A[8-150/0.1] |
| PSFHKR30-[60-1000/0.1]-KA[0-1000/0.1]-A[8-150/0.1] |
| PSFHKR35-[70-1000/0.1]-KA[0-1000/0.1]-A[10-150/0.1] |
| PSFHKR40-[80-1000/0.1]-KA[0-1000/0.1]-A[12-150/0.1] |
| PSFHKR50-[100-1000/0.1]-KA[0-1000/0.1]-A[14-150/0.1] |
| PSFMKR6-[20-300/0.1]-KA[0-298/1]-A[2-100/1] |
| PSFMKR8-[20-400/0.1]-KA[0-397/1]-A[3-100/1] |
| PSFMKR10-[20-500/0.1]-KA[0-497/1]-A[3-100/1] |
| PSFMKR12-[30-600/0.1]-KA[0-596/1]-A[4-100/1] |
| PSFMKR15-[30-700/0.1]-KA[0-695/1]-A[5-100/1] |
| PSFMKR20-[40-800/0.1]-KA[0-794/1]-A[6-100/1] |
| PSFMKR25-[50-800/0.1]-KA[0-792/1]-A[8-100/1] |
| PSFMKR30-[60-800/0.1]-KA[0-792/1]-A[8-100/1] |
| PSFMKR35-[70-800/0.1]-KA[0-790/1]-A[10-100/1] |
| SFGKR6-[20-300/0.1]-KA[0-298/1]-A[2-100/1] |
| SFGKR8-[20-400/0.1]-KA[0-397/1]-A[3-100/1] |
| SFGKR10-[20-500/0.1]-KA[0-497/1]-A[3-100/1] |
| SFGKR12-[15-900/0.1]-KA[0-900/0.1]-A[4-100/0.1] |
| SFGKR13-[30-600/0.1]-KA[0-595/1]-A[5-100/1] |
| SFGKR15-[30-700/0.1]-KA[0-695/1]-A[5-100/1] |
| SFGKR16-[30-800/0.1]-KA[0-795/1]-A[5-100/1] |
| SFGKR17-[40-800/0.1]-KA[0-795/1]-A[5-100/1] |
| SFGKR18-[40-800/0.1]-KA[0-794/1]-A[6-100/1] |
| SFGKR20-[40-800/0.1]-KA[0-794/1]-A[6-100/1] |
| SFGKR22-[40-800/0.1]-KA[0-794/1]-A[6-100/1] |
| SFGKR25-[50-800/0.1]-KA[0-792/1]-A[8-100/1] |
| SFGKR30-[60-800/0.1]-KA[0-792/1]-A[8-100/1] |
| SFGKR35-[70-800/0.1]-KA[0-790/1]-A[10-100/1] |
| SFGKR40-[80-800/0.1]-KA[0-788/1]-A[12-100/1] |
| SFGKR50-[100-800/0.1]-KA[0-786/1]-A[14-100/1] |
| SFHKR6-[15-400/0.1]-KA[0-400/0.1]-A[2-150/0.1] |
| SFHKR8-[15-500/0.1]-KA[0-500/0.1]-A[3-150/0.1] |
| SFHKR10-[15-600/0.1]-KA[0-600/0.1]-A[3-150/0.1] |
| SFHKR12-[15-700/0.1]-KA[0-700/0.1]-A[4-150/0.1] |
| SFHKR15-[15-800/0.1]-KA[0-800/0.1]-A[5-150/0.1] |
| SFHKR17-[30-900/1]-KA[0-900/0.1]-A[5-150/0.1] |
| SFHKR20-[30-1000/0.1]-KA[0-1000/0.1]-A[6-150/0.1] |
Loading...
More Information
Number of keyways can be specified up to 3.Example
Technical Information
Detailed Dimensions for Keyway & Threaded Relief of Rotary Shafts & Driving Shafts
Detailed dimensions of Keyway for Shaft Dia.(D·P·Q)
| Shaft Diameter | b | t | r | ||
|---|---|---|---|---|---|
| Reference Dimension | Tolerance (N9) | Reference Dimension | Tolerance | ||
| 6-7 | 2 | -0.004 -0.029 | 1.2 | 0.1 -0 | 0.08- 0.16 |
| 8-10 | 3 | 1.8 | |||
| 11-12 | 4 | 0 -0.03 | 2.5 | ||
| 13-17 | 5 | 3.0 | 0.16- 0.25 | ||
| 18-22 | 6 | 3.5 | |||
| 23-30 | 8 | 0 -0.036 | 4.0 | +0.2 0 | |
| 31-38 | 10 | 5.0 | 0.25- 0.4 | ||
| 39-44 | 12 | 0 -0.043 | 5.0 | ||
| 45-50 | 14 | 5.0 | |||
[ ! ]The example below shows the keyway shape for the specs KC, WKC, K=0, KC+A≥L and WKC+C+K+E>L.
Support Information
Basis of Fitting Selection/Dimensional Tolerances & Fitting
Click here for the information
Difference between Shatf and Rotary Shaft
Comparison of specifications between linear shafts and shafts for rotary shafts
| Specifications | Rotary Shafts | Linear Shafts | ||
|---|---|---|---|---|
| Material | 1045 Carbon Steel or Equivalent 304 Stainless Steel | 4137 Alloy Steel or Equivalent | 52100 Bearing Steel Equivalent SUS440C(13Cr) Stainless Steel Equivalent | 1045 Carbon Steel Equivalent or 304 Stainless Steel |
| Quenching/Hardness | - | Hardness 30-35HRC | High-frequency quenching | - |
| Outer Diameter Tolerance | h9/h7 | g6 | g6/h5 | f8 |
| Surface Treatment | No plating Black Oxide Electroless Nickel Plating | Black Oxide Electroless Nickel Plating | No Plating Hard Chrome Plating Low Temp. Black Chrome Plating Electroless Nickel Plating (Only Surface Treatment Fully Plated Type) | Hard Chrome Plating |
| Alterations | Rotary Shafts | Linear Shafts |
|---|---|---|
| L Dimension Tolerance | L<500: L±0.05 L≧500: L±0.1 L≧800: NOT applicable | L<200: L±0.03 200≦L<500: L±0.05 L≧500: L±0.1 |
| Flat Key Grooves | Up to 1 location specified | Up to 2 locations specified |
| Set Screw Flat | Up to 3 locations specified | Up to 2 locations specified |
| 2 Set Screw Flat | Up to 1 location specified Angle Specification: 15 Deg. Inc | Up to 2 locations specified Angle Specification: Fixed |
| V-groove | - | Up to 2 locations specified |
| Keyway | Up to 4 locations specified Specified on step: Applicable | Up to 2 locations specified Specified on step: NOT applicable |
| Change to Fine Threads | 1 type | 2 type |
| Change to Fine Threads Tap | - | 1 type |
| Undercut | M3~M30 | M6~M30 |
| Tapped Depth | Applicable | Applicable |
| Retainning Ring Groove | Up to 2 locations on D and 1 locationon each step *Can be chosen together | Up to 2 locations specified (Only Retaining Ring type applicable) |
| Slit Cam Groove | Up to 1 location specified | - |
| Concentricity | Applicable | - |
| Left Hand Thread | Applicable | - |
| Slit | Up to 1 location specified | - |
| C Chamfering Width | Applicable | - |
*Click here for information of Rotary Shaft Alteration Guide or Shaft Alteration Guide
Material/Surface General Information
Compatible Models
| Category | Ball Bearings | Bearings with Housings | Flexible Couplings | Timing Pulleys | Timing Belts |
|---|---|---|---|---|---|
| Image |  |  |  |  |  |
Basic Information
| Basic Shape | Straight | End Shape (Left) | No Machining | End Shape (Right) | No Machining |
|---|---|---|---|---|---|
| Heat Treatment | Not Hardened | Keyway | With Keyway |
Specification/Dimensions
-
Shaft Dia. D(mm)
-
Material
- Steel
- 304 Stainless Steel
- Steel
-
Surface Finish
- None
- Black Oxide
- Electroless Nickel
-
Shaft Dia. Tolerance (Metric Only)
- h9 (Cold-drawn)
- h7 (Ground)
- g6 (Ground)
-
Length L(mm)
-
A(mm)
-
Keyway (1) [KA](mm)
-
type
- PSFGKR
- PSFHKR
- PSFMKR
- SFGKR
- SFHKR
- SFMKR
- SSFGKR
- SSFHKR
- SSFMKR
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 7 Days or Less
- 9 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Rotary Shafts - Both ends stepped and externally threaded.
- Rotary Shafts - One end stepped, with snap ring groove.
- Rotary Shafts - Both ends are internally threaded.
- Rotary Shafts - Both ends stepped, internally threaded.
- Rotary Shafts - Both ends stepped, one end externally threaded and the opposite end internally threaded.
- Rotary Shafts - With keyways and retaining ring grooves on both ends.
- Rotary Shafts - One end is internally threaded and the other end is externally threaded, sizes in inches.
- Rotary Shafts - Both ends stepped, sizes in inches.
Complementary Products
-
Flexible Couplings - Disc type, for servomotor, high torque, two-bolt clamping type.
MISUMI Days to Ship : 8 Days or more
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy